|
Renderotica
»
Store Products
»
Product Support
»
3feetwolf
»
3feetwolf’s New Genitalia For Victoria 7 Official Support Thread
Rank: Advanced Member
Joined: 3/14/2013(UTC) Posts: 1,820
Thanks: 1257 times Was thanked: 1504 time(s) in 1278 post(s)
|
Did a forum search but didn't find anything so here goes. Getting the following error when I try to apply the Material Example for NGV7.
I have downloaded a fresh copy of NGV7 abd the karren update and reinstalled and also downloaded and ran the script tool and still get the same error message when I click on the Materials Example to apply it. Not sure what I did wrong.
TIA, Bill Bill I used to be disgusted, now I'm just amused
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 12,939
Thanks: 70 times Was thanked: 1456 time(s) in 1452 post(s)
|
Originally Posted by: Guttersnipe Originally Posted by: therat1200 ...One thing I've noticed with NGV7, which I still think is the best gen for V7 out there, is that the anus texture is just about always too pale. And it looks particularly unrealistic on the darker skined girls. Now I haven't poured over the read me file to a great extent,so maybe I've missed something, but it would be great if there was an easy way to make it darker.
At the moment, I go into photoshop & edit the temporary d2 & d3 textures, which often takes me at least an hour, which is OK as long as I remember to save the finished texture somewhere other than the temporary folder.
I normally just open up the texture in the Daz layered art editor and switch the anus colour layers off (there are two of them). There's probably a more elegant solution though...
Thanks Guttersnipe. I just had a quick play & found I can alter the colour quite easily in LIE. No more bright assholes for me!
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: Senilis Thanks for making 3feetwolf Pubic Hair for NGV7. I see Guttersnipe has already submitted a request for Monique uv/texture. I ditto his request.
And to be anatomically correct will there also be "curly tight" pubic hair for those African heritage models? Majority of the lineage from Africa do not have straight pubic follicles.
Could you give me an example picture? I will try to use the existing shaping morphs to create the hairstyle you need. If I fail, I will make a new morph.
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: billyben Did a forum search but didn't find anything so here goes. Getting the following error when I try to apply the Material Example for NGV7.
I have downloaded a fresh copy of NGV7 abd the karren update and reinstalled and also downloaded and ran the script tool and still get the same error message when I click on the Materials Example to apply it. Not sure what I did wrong.
TIA,
Bill
Hi, you didn't do anything wrong.
It was my bad, I'm sorry that in this material preset, the file path of "GensMapNM_1009" is wrong.
But this error won't have any effect on the other functions of NGV7.
I have created a new material example, you just need to download and use it to overwrite the existing file:
https://www.dropbox.com/...20for%20Victoria%207.duf
|
1 user thanked 3feetwolf for this useful post.
|
|
|
Rank: Member
Joined: 9/15/2012(UTC) Posts: 23
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: 3feetwolf Originally Posted by: Senilis Thanks for making 3feetwolf Pubic Hair for NGV7. I see Guttersnipe has already submitted a request for Monique uv/texture. I ditto his request.
And to be anatomically correct will there also be "curly tight" pubic hair for those African heritage models? Majority of the lineage from Africa do not have straight pubic follicles.
Could you give me an example picture? I will try to use the existing shaping morphs to create the hairstyle you need. If I fail, I will make a new morph.
Sent via PM
|
1 user thanked Senilis for this useful post.
|
|
|
Rank: Member
Joined: 11/22/2016(UTC) Posts: 17
Thanks: 1 times Was thanked: 1 time(s) in 1 post(s)
|
Hi 3feetwolf!
I need some help again. I managed to change the color of the anus and the labia minora. (even though I had to change the color via the translucency color for some reason?)
But I just can't figure out how to change the color of the clitoral hood area. (as seen here: http://i.imgur.com/3RkfZQT.png)
Thanks a lot for all your efforts and best regards!
|
|
|
|
Rank: Advanced Member
Joined: 3/15/2014(UTC) Posts: 182
Thanks: 44 times Was thanked: 32 time(s) in 20 post(s)
|
Hood area is part of the Torso section of the gens. What I do is just drop the opacity for that layer down a little bit until there's a decent blend. There could very well be a better way to do it but haven't messed with it too much. Just quicker for me to do it that way.
|
2 users thanked tattooedillusions for this useful post.
|
|
|
Rank: Member
Joined: 11/22/2016(UTC) Posts: 17
Thanks: 1 times Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: tattooedillusions Hood area is part of the Torso section of the gens. What I do is just drop the opacity for that layer down a little bit until there's a decent blend. There could very well be a better way to do it but haven't messed with it too much. Just quicker for me to do it that way.
Thanks for the response and the idea, haven't thought of that yet! But the more I drop the opacity of the layer it gets a more and more red-ish tint. See here: http://i.imgur.com/LYO0heL.png
I'm still new to all this, but I think it might have something to do with the translucency color? But when I do change that the whole torso gets a different tint.
Thanks and best regards!
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: binkz Originally Posted by: tattooedillusions Hood area is part of the Torso section of the gens. What I do is just drop the opacity for that layer down a little bit until there's a decent blend. There could very well be a better way to do it but haven't messed with it too much. Just quicker for me to do it that way.
Thanks for the response and the idea, haven't thought of that yet! But the more I drop the opacity of the layer it gets a more and more red-ish tint. See here: http://i.imgur.com/LYO0heL.png
I'm still new to all this, but I think it might have something to do with the translucency color? But when I do change that the whole torso gets a different tint.
Thanks and best regards!
Edit:
I think we can open the texture of Translucency Color with LIE, and then also lower the opacity of "GensMapSSS_1009" layer, so that the color of the hood will not be so red.
Edited by user Tuesday, December 13, 2016 1:39:03 AM(UTC)
| Reason: Not specified
|
1 user thanked 3feetwolf for this useful post.
|
|
|
Rank: Member
Joined: 11/22/2016(UTC) Posts: 17
Thanks: 1 times Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: 3feetwolf
Edit:
I think we can open the texture of Translucency Color with LIE, and then also lower the opacity of "GensMapSSS_1009" layer, so that the color of the hood will not be so red.
Yes, that was it! Awesome, thank you both so much, again. Forgive me for having so many questions, haha.
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 283
Thanks: 41 times Was thanked: 127 time(s) in 114 post(s)
|
Originally Posted by: Guttersnipe
I normally just open up the texture in the Daz layered art editor and switch the anus colour layers off (there are two of them). There's probably a more elegant solution though...
Brilliant tip Guttersnipe! "The higher and more advanced the civilisation, the more perverted the sex" Aldous Huxley
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: Mrduck
Hi Mrduck, sorry for the late reply.
I think I have finally found the problem.
In the script of NGV7, I use two functions, getTypeByName and getTypeByProperty, to identify the type of texture.
The script first calls 'getTypeByName', it will call 'getTypeByProperty' only when 'getTypeByName' does not recognize a texture.
When we run the script to apply new gens to Nargol, 'getTypeByName' incorrectly treats some of her diffuse textures as specular textures.
This causes the script to incorrectly use GensMapS_1009.jpg instead GensMapD_1009.jpg as the diffuse map of Labia Minora surface. So you can see the color of labia minora is gray.
I've modified the script of NGV7, it now use 'getTypeByProperty' to identify the texture only and it works fine on Nargol.
Please download the new script from the following link:
https://www.dropbox.com/s/k66ka2zbevyrrv9/New%20Genitalia%20For%20Victoria%207.dsa
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: binkz Originally Posted by: 3feetwolf
Edit:
I think we can open the texture of Translucency Color with LIE, and then also lower the opacity of "GensMapSSS_1009" layer, so that the color of the hood will not be so red.
Yes, that was it! Awesome, thank you both so much, again. Forgive me for having so many questions, haha.
Not at all :)
|
|
|
|
Rank: Newbie
Joined: 10/24/2016(UTC) Posts: 4
Thanks: 3 times
|
Hi 3feetwolf,
Thank you for making Public Hair for NGV7. Now you probably busy working on Monique7 update.
Please find a time to make UVs support for V6 Legacy, I can't finish converting my models without it.
Thanks.
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: nightwolf1982 Originally Posted by: 3feetwolf Originally Posted by: nightwolf1982
Uh, I'm very sorry for the delay, I have finished making the textures, but haven't begun to make correction morphs yet. I will release the Nata 3 free update after the pubic hair prop.
Cool, will be much appreciated when it comes out!
Hi nightwolf :), I have finished the Nata 3 update, please go to the first page to download it.
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: Sae Hi 3feetwolf,
Thank you for making Public Hair for NGV7. Now you probably busy working on Monique7 update.
Please find a time to make UVs support for V6 Legacy, I can't finish converting my models without it.
Thanks.
Oh, I'm so sorry for making you wait such a long time...
I have never forgotten this work and have begun making the V6 update, I promise to finish it as soon as possible
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 207
Thanks: 2 times Was thanked: 66 time(s) in 55 post(s)
|
Originally Posted by: 3feetwolf Originally Posted by: nightwolf1982 Originally Posted by: 3feetwolf Originally Posted by: nightwolf1982
Uh, I'm very sorry for the delay, I have finished making the textures, but haven't begun to make correction morphs yet. I will release the Nata 3 free update after the pubic hair prop.
Cool, will be much appreciated when it comes out!
Hi nightwolf :), I have finished the Nata 3 update, please go to the first page to download it.
3feetwolf, you are officially THE MAN!!!! Many thanks indeed!
|
|
|
|
Rank: Member
Joined: 3/10/2015(UTC) Posts: 18
Thanks: 6 times Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: 3feetwolf
That appears to be for G3F, not G2F
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: DoctorJellybean Originally Posted by: 3feetwolf
That appears to be for G3F, not G2F
Hi :)
Sometimes you might want to use G2F textures on G3F, there is a tool called 'Legacy UVs G2F' can help you do this. After applying the G2F textures to a G3F character, this update allows you to add NGV7 to her.
|
|
|
|
Rank: Advanced Member
Joined: 10/22/2013(UTC) Posts: 1,047
Thanks: 330 times Was thanked: 257 time(s) in 143 post(s)
|
Originally Posted by: Sae Hi 3feetwolf,
Thank you for making Public Hair for NGV7. Now you probably busy working on Monique7 update.
Please find a time to make UVs support for V6 Legacy, I can't finish converting my models without it.
Thanks.
Hello :), V6 update has been uploaded, please go to the first page to download it.
|
3 users thanked 3feetwolf for this useful post.
|
|
|
Renderotica
»
Store Products
»
Product Support
»
3feetwolf
»
3feetwolf’s New Genitalia For Victoria 7 Official Support Thread
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
|