Renderotica

Originally Posted by: Thunder-3D

Body Blush or "flush" happens to a lot of people during heavy excercise, high stress/excitement or orgasm. Blood pressure skyrockets for a very short period and causes the skin to turn red where it's closest to muscle. Orgasm blush typically centers on the neck/upper chest and radiates outward from there, sometimes to the cheeks, shoulders, and very rarely the stomach and upper back.

If you look at porn actors who have very fair skin, it's pretty apparent when it happens, sometimes turning VERY red, however it can be seen on any skin type to some degree.

This is an early prototype test render, the final product will still be textured but a little less "blotchy".

Maybe... you use the Chance/time to add for Derpys like me some Spanky Settings for the Buttzone? :D

That would be interesting for me^^.

I know there are also fans who like red zones under the butt on the upper legs/thighs.

And thanks for the image.

Originally Posted by: fredfred5150

I still use v4 (believe it or not lol). Is there any way I could reverse engineer this product to work on that figure? Like make a geometry shell then apply the maps and settings manually?

The maps are matted to the G8 female base UV. I honestly haven't tried any of this on V4 so I have no idea what will happen. I would assume if you have a G8F UV for V4 in your library you could manually copy the mats from a G8F shell to the shell on a V4, but I can't warranty or support that, it would be your decision to purchase and try it.

Additionally, keep in mind the shell is only compatible with iRay and only visible in iRay preview/render mode, so if you're using 3Delight you may just get a white shell.

Originally Posted by: fredfred5150

Hi, thanks for replying,

Hmm, any experience of using shells in Luxrender? Secondly would I need both the ultimate skin moisture core pack and the baby oil pack (it's the second one I'm interested in). Third, if I took a punt on this would be you be available for advice?

Core has the Shell and the toolkit. Sweat and Baby Oil are add-ons that require Core to work.

I have no idea how this will look in Luxrender, so as much as I'd like to help you with the experement, I really wouldn't be much help there :)

Originally Posted by: Akirael

 So I finally bought the big bad boy bundle yesterday. And I really wished there would be a pdf manual. Till I figured out why I couldn't use the included thumbnails (deactivated tooltips). But this is on me, I just prefer a clean interface and a printed manual. That this shell didn't like HD displacement maps, from the get-go, came with no surprise. As a quick and dirty workaround, I increased the offset of the shell. But that is just because I have no clue how the shell will behave when I temper with its own displacement map. Again, written documentation that explains the shell and the material presets, would be nice.

Once I get the hang on it, I expect it to be the same level of quality, that I'm used to, by Thunder-3D poses and collabs with Chameleon.

 

With best regards a proud owner of every single G8 product from Thunder-3D.

Admittedly I was a little caught off-guard on the whole skin displacement thing, I personally don't use it in favor of using HD mesh models instead. One of the things Meipe and I will be working on is a script to copy the figure Displacement to the Shell, ultimately that's up to him since he's the expert on scripting :)

Glad to hear you're enjoying it otherwise :)

Looking Good!

There are more map packs planned and I do plan to do some water sets that are less dense with more interesting droplet patterns, the first water set was to give a soaked look that works well in rain, and showers as well as more active beach and pool shots :)

A few quick updates:

Meipe has a working script to copy Displacement Maps from the figure to the shell for characters that use displacement, this will be released in an update soon.

Body Blush (just released this morning) has a utility to apply DIRECTLY to your figure to turn figure displacement OFF, this is a temporary fix until we're ready to release official updates with the script.

Now that Body Blush is out, Meipe and I are already working on G8 Male support, Futalicious (and sub-grafts) support, Dicktator support, and cluster bomb support for the full Ultimate Skin series. Most likely, G8 Male + Dicktator will be a separate product, and a graft support pack for females will be a separate product that will work for BOTH Ultimate Moisture AND Body Blush.

This is all to be decided once they're completed. Once these are done, I'll evaluate G3 support. I do plan to do it at this time, but it will be after all the G8 support is complete.

I've had a few people asking about New Gens, I haven't really looked at it but I don't think it will take too much to get it working. Currently New Gens is very low priority in the workload, and I'm not very familliar with how New Gens shells are set up, but I would assume you can just copy the torso mats (on the USM shell) to the graft area (new gens area on the USM shell) and set the UV to whatever New Gens uses.

If someone familliar with new Gens could test this I'd very much appreciate it :)

Now go have some wet orgasmic fun! :D

I need to run out for a couple of hours, but this afternoon I'll grab a copy of new gens 8 and see if I can wirite up a walk-through to get it working.

I assume all you need to do is apply the "iRay Uber Base" to the new gens area on the shell (in the Surfaces tab) and then copy the torso area to the new gens area and switch the UV to Base Female, but again, I don't own New Gens at the moment so I can't be sure.

Using New Gens with USM:

1. Apply the USM shell to a figure that already has all the grafts you will want to put on it, such as New Gens. If you put a graft on AFTER you apply the USM shell, that graft won't be recognised and you'll need to delete the USM shell and re-apply,
    
2. Next, go to the Surfaces Tab / Editor and select "new_gens_V8_1840_Anus" and "new_gens_V8_1840_Genitalia"
    
3. Go to Surfaces Tab / Presets and go down the list to Shaders / iray and select "!iray Uber Base" (should be the first icon) and double click, the triange around New Gens will still be white but look a little darker
    
4. Now go back to Surfaces Tab / Editor and select the Torso, right-click "Copy Selected Surface(s)", select the 2 New Gens (anus and genitalia) and right-click Paste to Selected Surface(s)"
    
5. Check the "UV Set" to make sure it is either "Default UV's" or "Base Female", either one appears to work.

If you alter the shell, you will need to copy from the torso and paste to the gens again.

Please remember, New Gens is currently not "officially" supported, but based on my testing the above will get USM AND body blush working on NGV8.

FYI, Ultimate Skin Moisture CORE has just had the following updates:

- UPDATED June 2020!

- Added Displacement Copy Script by Meipe!

- Added Face Only Opacity and shine tools!

- Updated Shader setting options type A, B and C

Well, I bought it, along with the two expansion packs, and....damn. This is fantastic. It's easy to use, works great with GP, and it looks so good. Thank you!!