2/16/2013 5:10:00 AM by
Erogenesis
(Edited: 4/4/2016 7:32:38 AM)
Views: 356
Development of the Injection
As many of you know, the making of the injection was quite the adventure... and not a recommended one. The primary reason is due to the unstable handling and complete lack of support for the CR2 (pz2) file format managed by you know who. These formats are very necessary to make anything happen in Poser, so we had no choice. Luckily through (im)patient research on behalf of Ken (Dexterward99) and myself, we managed to find a workaround to get Poser to install exactly what we wanted. In the meanwhile we've acquired quite some knowledge on the CR2 file format...
We found that pz2 file handling has improved with the most recent updates of Poser versions.
We developed a similar method as DAZ does with their ExP system, except we expanded it to work for any V4 you want converted. Therefore the DAZ version is not too far off.
Like mentioned on the DAZ page, in principle it should work with a Poser-created and exported V4 (no binaries) but don't risk it just yet. We've only tested it for DAZ 4.5. Wait for us to test it so then you can try it yourself if you want. Generally we'd advise you to be a little more patient until we get an official DAZ version out, tested and ready.
Release
Lali's Bits version 1.03 was released 16th February 2013. So far the reception has been calm, with a few questions (see below). I'll expect many more because Lali's Bits is quite vast. You might get a little lost at first. The manual should get you going. It has a very comprehensive chapter on getting started. I recommend you patiently just follow that, or at least read it.
In the meanwhile I will do my utmost to update this page so help you with any common problems.
I will do my best to reply to any posts or emails but don't be surprised if I take a bit long (like a day), or in the worst case, just forget :O in that case, spam me again!!!!
Be sure to check the updates for notices that I am sick, or off to the lake, or dead etc... ;)
Troubleshooting
Sexy Bitch Preset
The first issue I got was that once The Sexy Bitch Preset is put to zero, it looks quite awkward (picture coming soon). Nothing wrong, that's just the zero setting to start from. Its the V4 mesh untouched and the pussy prop in a clear and visual position to adapt and change before tucking it away in her labia folds, for example.
Aiko and other FBMs
Make sure all your FBMs (like Aiko) are zero'ed so that you can first see what the V4 version looks like, then start playing with Aiko, or whatever FBM you use.
Generally, for Aiko, you'd have to adjust the vertical position of the prop. This can be done in Pussies > Action > Quick Adjustments (not sure about the names, I'll check just now). You can safely leave it there.
My first and formost advice with this system is: be patient!!!! Its LARGE and there are many options.
My second advice is: have fun!