11/7/2016 3:50:24 PM by
FunFungi
(Edited: 11/7/2016 4:25:28 PM)
Views: 1450
Glowing Eyes For Genesis 3 Male(s)
By: babbelbub
Fun Special Effects Contact lenses for your characters! Suitable for many types of renders... Superhero, Sci-Fi, Horror and Fantasy. Comes with six light materials.
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Genesis 3 Male
Glowing Eyes For Genesis 3 Female(s)
By: babbelbub
Fun Special Effects Contact lenses for your characters! Suitable for many types of renders... Superhero, Sci-Fi, Horror and Fantasy. Comes with six light materials.
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Genesis 3 Female
Starship Bridge 8 (For Poser)
By: John Hoagland
Designed for a vessel on an exploration mission to the stars, this bridge has more open spaces and stand-up consoles.
The captain sits directly behind the helm and ops console.
The rear stations can be reconfigured to display any of the ship`s functions. To save space, the chairs for these stations are pushed into the walls.
Multiple doors (and lifts) allow easy access to and from the bridge.
The ready room (off the front of the bridge) allows the captain to meet with his staff in a private setting. This room includes two visitor’s chairs and a couch.
.: Product Features :.
* Includes two Poser figures (obj, cr2, png), over 100,000 polygons!
-Bridge 8: 99,971 polygons
-Bridge 8 Ready Room: 28,658 polygons
* Includes fully modelled lift interior for all three elevator-lifts.
* Includes modelled head (bathroom), though no toilet is included.
* Also includes a Poser scene file (pz3) which includes both of these models and a light set
.: Moving Parts :.
* As is usual for our Starship Bridges, all walls (and the ceiling) can be hidden for easier camera placement.
* The helm and ops chairs can rotate around (with an ERC dial on the BODY)
* The helm and ops consoles can swing around for easier access to the chairs (with and ERC dial on the BODY).
* Five rear chairs can be moved or rotated to suit the needs of your scene.
* ALL of the doors can open and close (with an ERC dial on the BODY).
* ALL of the doors lead somewhere:
-The Left Rear and Right Front doors open into lifts.
-The Right Rear door leads to a rear hallway (which is a separate body part), though the doors at the end of the hallway do not open.
-Another set of Right Rear doors lead to a head/ bathroom.
-The Left Front doors lead to another lift and to the Ready Room.
.: Textures :.
* One set of textures is included for the Bridge and Ready Room.
* Templates are included for all materials, and some are color-coded for ease-of-use.
.: Poses :.
* Hide/ show each wall and the ceiling.
* Hiding and showing the left alcove hides and shows the left doors, hiding the right alcove hides and shows the right doors, etc.
.: Cameras :.
* Fourteen camera files are included.
* The camera files also hide any walls which may be blocking the camera.
.: Ready Room :.
* Includes three chairs: the main/ captain`s chair and two visitor chairs.
-The visitor chairs are mapped the same as the chairs in our other bridge sets so you can use the same textures.
* All walls and ceiling can be hidden/ shown
* The computer on the desk is a separate part, which can be moved or rotated to suit the needs of your scene.
* The desk can be hidden/ shown.
* The chairs are separate parts, which can be moved or rotated to suit the needs of your scene.
* Two doors can open and close (with an ERC dial on the BODY).
* Room decorations (such as model spaceship, Shakespeare book, and aquarium) not included.
* By default, the Ready Room is loaded into the center of the scene, but can easily be aligned with the bridge set.
.: Scene File :.
* Includes both the Bridge 8 and Bridge 8 Ready Room. The Ready Room has been aligned and parented to the Bridge.
* The light set in the included scene file has Ambient Occlusion enabled for the top light.
-This will create additional detailing, but may increase render times.
Recommended for use in Poser 5 and above, though the Ambient Occlusion lighting will only work in Poser 6 and above.
Product Requirements and Compatibility:
Daz Studio Not Tested
Poser 6+
Pauline's Severed Head
By: Darkseal
"It's nothing to... lose your head over"
Pauline’s Severed Head is a rigged head with some morphs to give your bodiless girlfriend some expression!
You will find Pauline’s Severed Head in the "Severed Heads" folder of your figure library.
***NOTE***
Requires Poser 6 or later...
Most Renders are rendered in Octane. Firefly render is labeled firefly.
****Currently, other standard or 3rd party Pauline textures will NOT work with this product.****
Product Requirements and Compatibility:
Daz Studio Not Tested
Poser 6+
Pauline
Summer Stories
By: sumigo
25% off until 12/5/2016
Three exciting short stories from summer.
The Skinnydip is about a young Coed who goes to the wrong place for a swim.
The Corridor is about a young business woman with a bad sunburn wearing nothing but a towel who gets stuck in the hotel basement.
Roof Gremlins is two sunbathers who thought they found the perfect place to sunbathe nude and get rid of those pesky tan lines.
When one starts talking about a local legend, things get interesting.
Number Of Images:53
Image Quality:1080p
Image Size: 1920 x 1080
Image Format: PDF
Product Requirements and Compatibility:
WinZIP or other unzipping utility
Adobe Acrobat Reader or other PDF reader
Blood Layers For Genesis 3 Males And Merchant Resource
By: SF-Design
30% off until 11/11/2016
Blood Layers for Genesis 3 Males and Merchant Resource
Do you plan to create a scene with a battle, a duel, an accident, a corpse, a victim or are just in the need of some blood for your male characters?
This product comes with 41 different Layered Image Editor (LIE) blood layers that can be applied to any character that is based on Genesis 3 Male.
10 layers for the face, 10 for the torso, 10 for the arms, 10 for the legs and 1 for the teeth.
You can add several layers at the same time (even to the same body part) to achieve the result you like. Since all layers use the LIE technology you can freely relocate them on the skin in the LI Editor if needed.
This product works with Iray, 3Delight, Luxrender and all other render engines supported by Daz Studio.
This product is also a merchant resource.
Please refer to the ReadMe how it may be used as merchant resource.
Contents:
- 10 LIE presets for the face
- 10 LIE presets for the torso
- 10 LIE presets for the arms
- 10 LIE presets for the legs
- 1 LIE preset for the teeth
- 41 LIE image maps (4096x4096)
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Genesis 3 Male
Couple 03
By: RumenD
The product contains 12 poses(6 couples) for Genesis 3 female with G3F Genitalia SKU: 52775 and
G3F Shemale - Standalone SKU: 52902
Each pose includes unique facial expression and shaping preset.
Contents:
1 12 poses for G3F
2 6 shaping presets for G3F
3 6 shaping presets for G3F Genitalia SKU: 52775
3 6 shaping presets for G3F Shemale - Standalone SKU: 52902
Product Requirements and Compatibility:
Daz Studio 4.8+
Poser Not Supported
Genesis 3 Female
G3F Shemale - Free Update
G3F Shemale - Standalone
G3F Genitalia