Labworks 2 CORE PACKAGE for DS and Poser
davo_LW2core_popup01.jpg davo_LW2core_popup02.jpg davo_LW2core_popup03.jpg davo_LW2core_popup04.jpg davo_LW2core_popup05.jpg davo_LW2core_popup06.jpg davo_LW2core_popup07.jpg davo_LW2core_popup08.jpg davo_LW2core_popup09.jpg davo_LW2core_popup10.jpg davo_LW2core_popup11.jpg davo_LW2core_popup12.jpg

Description

Product: Labworks 2 Core Package for Daz Studio

Vendor/Creator: Davo or Davorama
store support forum: https://www.renderotica.com/community/forums.aspx?g=topics&f=2878
Copyright (c) 2023 davo. All rights reserved. Not intended for redistribution.
-----------------------------------------------------------------------------------------------------------------------------------
In the name of science! Build up your scifi, medical and industrial bondage and experimentation artwork with the Labworks 2 sets. Restraints and devices are also a plus for gender-bending experimentation!
-----------------------------------------------------------------------------------------------------------------------------------
SPECIAL NOTE 1: Posing for G8F/G8M/V4/M4 figures is based on the STANDARD, NON-MORPHED OR ALTERED figures. If you have applied morphs or altered body shapes or proportions, you must manually adjust the character and device positions if connection points are not touching. If you do have to alter
the poses, you can do this to one side of the device and one side of your character then use the  symmetry command to mirror the result to the other side.


SPECIAL NOTE 2: Desciptions shown here are for Daz Studio. Poser version is also available. This promo can apply for both. Where G8F and G8M are mentioned, there is an equivalent for V4 and M4. Foldering structures are slightly different for Poser.
-----------------------------------------------------------------------------------------------------------------------------------
System Requirements for Daz Studio:
- PC and Mac compatible
- Requires Daz Studio 4+ (created using Daz Studio 4.2)
- All files in .duf, .ds*, .png and .jpg format.

System Requirements for Poser:
- PC and Mac compatible
- Requires Poser 2012+ (backward compatible to Poser 8 except readme notes python scripting may not work on older versions)  
- All files in .obj, .cr2, .png and .jpg format.
----------------------------------------------------------------------------------------------------------------------------------

Package Features:

-------------------------------------
Chambers Folder
-------------------------------------
-  Chamber 1: This is a cool chamber that is large enough to fit most equipment that comes with the Labworks 2 sets. There is a central platform with some hose ports that can be repositioned. You can move the platform out of view.  All walls and ceiling can be moved out of view for better camera angles and views.  The side walls have door coverings to make them solid.  The front and side walls have a morph to move the bottom of wall towards the top and hide the top of the wall to make it appear the walls are doors.
Pose files are provided to achieve these wall morphs and show/hide the solid side wall doors. This chamber will fit inside the Core Room.

-------------------------------------
Core Room Folder
-------------------------------------

- Core Room: This is a large, industrial-scifi style room that can be used for laboratory and medical experimental purposes if you wish. The end walls have either a shield that covers a viewing windor or a poseable set of doors. The side walls have some items attached such as banks of vents, conduit cable
and light tube rail. These items can be repositioned or angle adjusted as desired. The ceiling has a center light bank that can be removed. All walls, ceiling and floor can be moved from view for better camera angles and views. There is ambient lit / emmissive light properites built into some materials so they will glow in a dimly lit scene. The wall with windows has a shield that can move up to cover the windows. The window frame can be moved out of view if desired. The window opening will fit the "CHAMBER 5" core package control room if you own it (sold separately by Davo). The front and back end walls can be moved out of view if you wish to stack the room end to end, if you do so, the side walls, ceiling and floor have a morph to shorten or lengthen the walls so you can prevent overlapping. A pre-assembled double core room is provided with this already done.

- Core Room Double: Two core rooms stacked end to end for a larger scene. The rear room is parented to the front room.

- Platform 1: This is a large circular raised platform you can place other equipment, restraints or tables on.

- Platform 2: This is a rectangular raised platform you place other equipment, restraints or tables on. The platform has width and depth morph.

- Shield: This is a glass shielded frame you can put into the 4 corners of the room to provide a more shielded or secluded look and feel. The shield has size and shape morphs for adjustment

- Shield Set: This is a wearable preset for the core room which will import 4 of the shield figures in the corners of the room. Select the core room then apply the shield set.

-------------------------------------
Equipment Folder
-------------------------------------
- Computer Station 1: This is a scifi looking console with poseable armature, console and screen. A pose file is provided for G8F G8M in the pose library to have a standing user pose.

- Computer Station 2: This is a scifi looking console with adjustable height console, a glass protection shield and poseable display screen. This station is wide enought to accommodate 2 users.  A pose file is provided for G8F G8M in the pose library to have a standing user pose.  Add another character and apply the same pose, move the character to the side and alter neck and hands so they have a slight difference.

- Feeder 1: This is a 'phalic' shaped feeder with display screen, flow dial and ambient/emmissive lit materials. You can position/place this feeder into your characters mouth and parent (no poses supplied). Some size/shape morphs on parts of the feeder.

- Feeder 1 Tube Combo: This is the Feeder 1 figure with pre-parented easypose fluid tube.

- Feeder 2: This is another 'phalic' shaped feeding tube. Position and parent to your characters head (no poses supplied). The fluid tube on the feeder has an outter and inner material zone so it can simulate fluid in a tube. You can use the material editor to change the inner material. The fluid tube has easypose bending technology.

- Fluid Tube: This fluid tube has an outter and inner material zone so it can simulate fluid in a tube. You can use the material editor to change the inner material. The fluid tube has easypose bending technology.

- GenCup 1: This is a genital cup that fits your characters hip. The cup has an easypose hose that you can pose into some port on a piece of equipment. There is a positioning pose for G8F G8M in the pose library. Please note, this cup is best utilized on a character with legs spread.

- GenCup 2: This is a more advanced genital cup that fits your characters hip. The cup has an easypose hose that you can pose into some port on a piece of equipment. There is a positioning pose for G8F G8M in the pose library. Please note, this cup is best utilized on a character with legs spread. Some size and shape morphs are on the cup.

- Head Gear 1: This is a face covering piece of equipment that can be used for experimental or hypnosis purposes. The base of the headgear has an easypose hose that can be posed back into some other equipment. The face cover can flip up and down. There is a VR visor over the eyes, this can be removed.
There are 2 versions of the headgear, one for G8F and one for G8M, use the appropriate one for your character. The pose library has a positioning pose for the head gear as well as a material pose file for clear face or opaque face. There is a pose to show or hide the VR visor as well.

- Head Gear 2: This is a face covering piece of equipment that can be used for experimental or hypnosis purposes. The base of the headgear has an easypose hose that can be posed back into some other equipment. There are 2 versions of the headgear, one for G8F and one for G8M, use the appropriate one for your character. The pose library has a positioning pose for the head gear.

- Mind Control Prop (for G8M or G8F): This is a smart prop that fits to your characters forehead. It has some ambient/emmissive lit materials. This is cool for aiming a laser beam into the center if it to simulate mind control.

- P-Pump: This is a phalic shaped pump that fits over your male or futa characters genitals. It has an easypose hose that can be aimed... "somewhere".

- Power Cell: This is a large power cell or industrial equipment figure. It's got 2 easypose hoses at it's base that you can position on some other equipment then pose back toward the port at the base. The cell has some ambient/emmissive lit material zones that will glow in a dimly it scene. Use this figure  wherever you think it will look cool.

-------------------------------------
Milk Station Folder
-------------------------------------

- Milk Station 1: This unique restraint holds your character in a vertical position with legs spread and arms above the head. It's got a built in vibrator armature unit, ports to plug hoses into and ambient/emmissive lit materials that glow in dimly lit scenes. The arm and leg tube holders are adjustable for custom fits.
There is a pose for the Station, G8F and the Teets (if using the combo figures) in the pose library.

- Teets: This is figure is used for breast milking purposes. It's got a non-rendering null base that can be used to move all the elements around. The right and left teet can be positioned over your characters nipples then you can pose the easypose tubing back toward the ports on the port base. The easypose tube on the port base can be posed into one of the ports on the milking station or milk tank figures.  The right and left 'teet' has an easypose 'overall length' morph that will shorten or lengthen the entire hose.
The teets and ports are symmetrical mirroring, you can pose and mirror the teet positions, however, the easypose bending technology does not mirror if you use it.

- Milk Station 1 Combo: This is the milk station with the teets figure pre-parented to it. Use this if you wish to use the station as a milking station rather than a restraint. See notes about teets and station above.

- Milk Tank 1: This is a milk storage tank with size and shape morphs. The fluid in the tank is also height adjustable. The tank suction tube inside the tank has morphs as well. You can use this tank to hold fluids for milking or other purposes, use as desired.

-------------------------------------
Restraints Folder
-------------------------------------

- Restraint 1: This restraint holds your character in a vertical spread eagle pose. The armatures are length adjustable and hand cuff bases are poseable. The arm and leg cuffs are diameter adjustable. There is a non-rending null base between the posts that allow you to move the whole figure around.
Figure is symmetrical mirroring for easier posing.
Pose file for G8F G8M are provided in the pose library.

-------------------------------------
Tables Folder
-------------------------------------

- Table 1: A scifi laboratory style restraint table with adjustable armatures that have wrist, shoulder, ankle and thigh cuffs. Most parts on the table are size/shape morph adjustable for custom fits. There is a poseable head rest and a hose port between the legs that can be used in conjunction with the Genital Cups figures.
Pose files for G8F G8M are provided. Basic Scifi cuffs for wrist and ankles are required for posing with this table. Cuffs are provided.

- Table 1 G-Bender: This is an add-on figure for table 1 figure. It can be used as a basic medical unit or be used for trans-gender body modifications. It attaches to the tables "table" body part and has a poseable genital covering as well and male and female chesk plates. Most parts have size/shape adjustment morphs.
A pose file is provided in the library for the G-Bender unit.

- Table 1 Gbend Combo: This is a Table 1 figure with G-Bender already pre-parented for your convenience.

- Table 2: This restraint table can be used as a body scanner table or restraint table. It's got poseable wrist and ankle mounts, a sliding arch scanner and a built in computer console that can rotated as desired. Most parts on the table have size/shape morphs for custom fits and posing.
A pose file for G8F G8M is provided for the reclined position and a pose for standing at the computer console is provided.
Basic Scifi cuffs for wrist and ankles are required for posing with this table. Cuffs are provided.
Unit 1 figure is a larger body scanner that works with this table, you can use the show/hide arch poses to hide the arch scanner and place the Unit 1 figure over the table.  Unit 1 is provided in the Units figure folder.

- Table 3: This restraint/exam table has a static "X" shape and repositionable wrist and ankle cuff mounts. There is a built in genital cup with easypose hose and built in chest covering with male and female chest connections which is good for medical or trans-gender modifications. The table is angle adjustable and most parts have size/shape morphs for custom fits and adjustment.
Pose files for G8F G8M are provided. Basic Scifi cuffs for wrist and ankles are required for posing with this table. Cuffs are provided.

-------------------------------------
Tanks Folder
-------------------------------------

- Tank 1: This is a storage or holding tank that can fit 1 person inside. It's got a repositionable control panel and morphing height fluid surface inside. The tank has size/shape adjustment morphs.
Pose file for G8F G8M is provided.
 
- Tank 2: This is a rack of fluid tanks that can be used as a scene clutter item to add interest. The tanks fluid levels are morph adjustable. Place this tank in your scene for interest.

-------------------------------------
Tool Stations Folder
-------------------------------------

- Tool Station 1: This articulated armature has options for a syringe or dildo tool tips. The station is fully poseable and some parts have size/shape morphs to reach those hard to get areas. There is a plunger morph on the syring and shaping morphs on the dildo.
Pose file to change tool tips is in the pose library.
 
- Tool Station 2: This is a large overhead tool station that you can place beside or behind any of the restraints or tables in your scene. There are size and shape morphs on some parts. The head of the tool station will fit the supplied smart prop tool heads. The tool heads are actually props that have been
placed in the figures folder.  There are pre-assembled versions of this tool station in the combos folder.  The smart prop tool heads are as follows:

-- Tool Station 2 Lamp: An overhead lamp with ambient/emmissive materials
-- Tool Station 2 Laser: A laser beam tool head, the laser has morphs. This is good to use with the mind control smart prop.
-- Tool Station 2 Ray: This is a blue colored ray that shines down on your character, implying some kind of gamma body modification/saturation beam. Rays have size/shape morphs.
-- Tool Station 2 Tool Port: This head has 4 ports to attach the Tool Hose and its tool tips to.

-------------------------------------
Tool Hose Folder
-------------------------------------

- Tool Hose: This easypose tool hose can be used in your experiment scenes. The tool head can be positioned as desired, then the hose posed out of view or posed toward a port on some other piece of equipment. There are smart prop tool tips as well as articulated tool tip figures available.

-- Tool Hose Claw: This is an add-on  claw with articulated fingers to grasp items or body parts.
-- Tool Hose Fingers: A bit smaller than the claw, this figure has some articulated fingers to grasp items.
-- Tool Hose Milker/Syringe: This figure has some milking teets or double syringes. There are size/shape morphs on some parts and the figure is symmetrical mirroring.
A Milker and Syringe version (same figure) is provided to choose from.

The "combos" folder has a pre-parented set of the Tool Hose plus all the different tool add-ons and smart props.

The "Smart Props" folder contains smart prop tool tips for the Tool hose as follows:

-- Blade: A simple blade for cutting.
-- Dildo: A dildo with size/shape morphs
-- Feeder: A feeder tube to insert into mouth or other areas.
-- Laser: A laser beam with morph length.
-- Mask: A filter mask that you can place on your characters face.
-- Sprayer: A sprayer tool tip with spray morphs.

To apply the tool tips, select your Tool Hose then click the desired smart prop, it will place automatically.

---------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:

SPECIAL NOTE FOR POSING: Posing for G8F, G8M, V4 and M4 is based on the standard sized and proportioned base character from Daz3d. If you have a heavily morphed or resized/shaped custom character, you will possibly need to make some manual adjustments on your character and the product equipment for positioning.

Note: Some poses will require the Basic scifi Cuffs from the props library applied to your character.

The pose libraries contain poses for 
G8F, G8M, V4 and M4 and matching poses for some of the equipment in this package.

Please note the READ FIRST image file in the library, click on it see what equipment body part you need to parent your chacter to before appling poses.

---------------------------------------------------------------------------------------------------------------------------------
Read First icons: Most folders contain a "READ FIRST" icon. By clicking this icon, an informational dialog box will pop up with pertinent information regarding the contents of the folder. Please read these notes and it is helful.
-----------------------------------------------------------------------------------------------------------------------------------
A more detailed readme file is included in the product zip file.



Downloads


Application Compatibility

Daz StudioDaz Studio 4.21
PoserPoser 11
 Poser 12
Other Notes
(Products created/rigged in Poser 2012 and Daz Studio 4.21)

Figure Compatibility

Daz FiguresGeneration 4Michael 4
  Victoria 4
 Genesis 8Genesis 8 Female
  Genesis 8 Male


Product Requirements

V4 Morphs ++
Other Notes
(Poses work for G8F base (free) and V4.2 (from Daz3d))


Related Products

Legacy Davo: Labworks 1 "Adult Expansion" for DS
$18.99
 
Chamber 5 CORE PACKAGE for DS and Poser
$17.95
 
Madlab 6 "Core Package" For DS 4.8+
$24.99
 


Labworks 2 CORE PACKAGE for DS and Poser

SKU: 68560
By: Davo

Purely scientific or evil experimentation happens here with Labworks 2. A beautifully crafted research room and restraints that will fill your experimental needs and even fit your gender bending designs with it's props and figures.

$27.95



 
Views: 19182

Others Also Purchased

Chamber 7
$19.95
 
Chamber 6
$14.95
 
Labworks 2 Equipment Pack 1 for DS and Poser
$18.95
 
Devious Devices 08 DS and Poser Versions
$9.95
 
Bondage Furnishings THE WEDGE
$11.95
 
Legacy Labworks 1 OPEN LAB Texture Expansion and G9 Support for DS
$5.95
 
Legacy Labworks 1 OPEN LAB for DS
$14.95
 
Legacy Labworks 1 CONFINED LAB for DS
$15.95
 
Legacy Davo: Labworks 1 "Adult Expansion" for DS
$18.99
 
Chamber 5 CORE PACKAGE for DS and Poser
$17.95
 

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.