Description
Product: Terminus 5 Decapitation Core Pack for Daz Studio
Vendor/Creator: Davo or Davorama
Daz Studio Optimization: Freeone
Copyright (c) 2020 davo. (c) Copyright 2020 freeone. All rights reserved. Not intended for redistribution.
------------------------------------------------------------------------------------------------------------------------------
Special Note regarding posing presets for Genesis Characters:
The complex wearable presets contained in this set not only pose the character but apply and align props to the character as well.
These poses and prop alignments are guaranteed to be “relatively precise” when properly applied to a BASIC DAZ STUDIO GENESIS 8 Male/Female
Use of this product on a character that is even the slightest deviated from a Basic Genesis 8 Male/Female negates ANY guarantee of “relatively precise” posing and prop alignments to the character. It is recommended to first apply the presets in this set and then apply any other morphs or characters that do not deviate the poses and prop alignments beyond your desire or abilities to correct them.
The Neck Caps (Stumps) and Blood Drip Props positioning is sensitive to posing and morphing of the character, manual adjustment WILL be required.
-------------------------------------------------------------------------------------------------------------------------------
System Requirements:
- Requires DazStudio 4.11+
- Basic G8F or G8M for poses.
- PC compatible
- Not tested in Mac
- All files in .duf, .dsf, .png and .jpg format.
-------------------------------------------------------------------------------------------------------------------------------
Content Descriptions:
Guillotine: A modern, industrial strength guillotine for your high volume executions. This Guillotine has posable neck stocks, posable activator lever and sliding blade. The blade holder at the top of the guillotine can open and close. The blade has some size/shape morphs for adjustments. The neck stocks have a hole diameter morph to accommodate a larger neck such as G8F or G8M neck. The spring coil blade stop has a length morph to use in conjunction with the guillotine table if you use it. Pose files
for G8F or G8M are provided that incorporate the "Stock 3" figure and "Guillotine Table" in the options. See descriptions for those items below. There is also a bloody/non-bloody material preset for the guillotine in the Materials library.
Guillotine Table: A little morbid, but this table lets you fuck your favorite character as they lay on their back and watch t he blade come down! The table is height adjustable, can tilt and has posable leg chains and wrist cuff mounts. There are two leg slats that come out to hold your characters legs open. You can move the slats back and forth to accommodate your character as needed. This figure is side to side symmetrical mirroring so you can just pose half the table and half your character and mirror the results to the other side.
The pose files for G8F/G8M are provided and have a 1 and 2 pose (before and after) which switch your characters body from tense to "slumped". There is a bloody/non-bloody material preset for the lift in the Materials library.
Disposal: When you do so many executions on a single day, you need to get rid of the corpses somehow. This core package includes a gruesome disposal unit that will grind up your left-overs and whisk them away to an undisclosed location through pipes. No muss, no fuss. The Disposal unit has a posable lid and adjustable lift arms. The lid struts that connect to the base will automatically point to the connection point. The grinding blades can spin, plus there is a "Master Dial" on the base of the figure that spins both blades at the same time. There is a bloody fluid level that can move up and down inside the grinder. To make things more interesting, there is a included "ground plane" that is parented to the top of the disposal unit. This allows the unit to be recessed into the ground, making it easier to dump in bodies without the Disposal Lift figure.
Pose files are provided for the lid of unit and a pose file to move the unit to ground level if you use the
ground plane prop. If you use the ground plane prop in conjunction with the Terminus 5 "Core Pack" Arena (not included, sold separately)
There is also a bloody/non-bloody material pose file for the disposal in the Materials library.
Disposal Lift: Drag bodies onto the lift, raise the lift and tilt them into the disposal opening. Easy Peazy! The lift platform has hydraulic lift legs beneath it. These will automatically point to the lift base as you move the lift platform forward or backward. Without a ground plane or floor, the lift legs will look awkward in their lowered position, this is normal and meant to be hidden by a ground plane or floor. The lift has a Master Dial to widen the lift platform and gates on both ends automatically. Pose files are provided to operate the lift in conjunction with the disposal.
There is also a bloody/non-bloody material preset for the lift in the Materials library.
Head Box: Need a place to store those heads for later? The head disposal box is a perfect little addition to your morbid execution hard scenes. You can place this box right there where the heads are going to drop.
The lid is posable and there is a bloody/non-bloody material preset for the box in the Materials library.
Pad: This is a simple pad you can slide underneath your execution devices in all your terminus packages. It can act as a splash pad and it has a morph to lengthen the back end of the pad. The grated cover acts as a very cool visual element for your scenes.
There is a bloody/non-bloody material preset for the pad in the Materials library.
Stock 3: This is another unique stock that is used in conjunction with the Guillotine decapitator. It can also be used with other decapitators or other devices or just as a humiliating restraint. The calf and thigh restraints are repositionable and have size shape morphs for the length, inner and outer width of the bars. There are 2 wrist cuff mounts that are also repositionable. This figure is side to side symmetrical mirroring so you can do right and left arm poses faster.
here is a bloody/non-bloody material preset for the stock in the Materials library.
--------------------------------------------------------------------------------------------------------
Decapitators Library Props:
Disposal Ground Plane: This is combined Figure that places a ground plane around the top of the disposal unit figure. This, in combination with the ground plane prop, will make it look like the disposal unit is recessed into the ground.
Head Pikes 1 and 2: These are simple pikes/spears to place your characters severed heads on. There are some morphs on the pikes for size/shape adjustments.
There is a bloody/non-bloody material presets for the pikes in the Materials library.
Head Tongs: This is a set of tongs to hold a severed head. There is a width morph file that works best to make it wider. There is a bloody/non-bloody material preset for the tongs in the Materials library.
G8F and G8M libraries:
This Neck Prop library contains some severed neck props for G8F and G8M. You must use the "for body" and "for head" poses in this library to utilize these props.
Neck Blood: A simple blood dripping texture prop. This is a smart prop and will automatically snap to your characters neck (click on your character first, then add the prop). There is a top angle and length adjustment morph on this prop. Neck Stump Body: This is a simple Neck Stump that goes onto your characters torso/neck area. See note above for pose before applying this prop.
Neck Stump Head: This is a simple Neck Stump that goes onto your characters severed head. See note above for pose before applying this prop.
----------------------------------------------------------------------------------
A more detailed readme file is included in the product zip file.
Application Compatibility
| Daz Studio | Daz Studio 4.10 |
| Poser | Not Supported |
| | Not Tested |
| Other Notes |
| (Poser only version is sold separatley) |
Figure Compatibility
| Daz Figures | Genesis 8 | Genesis 8 Female |
| | | Genesis 8 Male |
| Other Notes |
| (V4/M4 support is in the Poser version, sold separatley) |