Terminus 5 "Cruel And Unusual Pack 2" For DazStudio
davo_T5CU2_DSpopup01.jpg davo_T5CU2_DSpopup02.jpg davo_T5CU2_DSpopup03.jpg davo_T5CU2_DSpopup04_cgb-(1).jpg davo_T5CU2_DSpopup05.jpg

Description

Product: Terminus 5 Cruel and Unusual Device 2 for Daz Studio
Vendor/Creator: Davo or Davorama
Daz Studio Optimization: Freeone

Copyright (c) 2020 davo. (c) Copyright 2020 freeone. All rights reserved. Not intended for redistribution.
------------------------------------------------------------------------------------------------------------------------------
Thank you for purchasing " Terminus 5 Cruel and Unusual Device 2 " Package for Daz Studio from Davo/Freeone!
Industrial Strength executions for the modern age. The Terminus 5 Cruel and Unusual Device 2 is a virtual pain train with death on a rail!
-------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------
The complex wearable presets contained in this set not only pose the character but apply and align props to the character as well. These poses and prop alignments are guaranteed to be “relatively precise” when properly applied to a BASIC DAZ STUDIO GENESIS 8 FEMALE. Use of this product on a character that is even the slightest deviated from a Basic Genesis 8 Female negates ANY guarantee of “relatively precise” posing and prop alignments to the character. It is recommended to first apply the presets in this set and then apply any other morphs or characters that do not deviate the poses and prop alignments beyond your desire or abilities to correct them.
-------------------------------------------------------------------------------------------------------------------------------
System Requirements:
- Requires DazStudio 4.11+
- Basic G8F or G8M for poses.
- PC compatible
- Not tested in Mac
- All files in .duf, .dsf, .png and .jpg format.
-------------------------------------------------------------------------------------------------------------------------------
Figure Library Descriptions:
-------------------------------------
Device 2: This cool restraint table has a gap down the middle so that cutting tools can pass through it along its length.  This allows your favorite characters to be cut down the middle from head to crotch. It is fully posable and the base of the figure has joint parameter morphs that will adjust the width and height of the table for all parts.  The table part of the figure has arm and leg length morphs as do the cuff mount hook pads.  This is a symmetrically mirror posing figure, so you only need to pose one half of your character and table and mirror the results to the other haft to save time.  Pose files for G8F/G8M are provided in the pose library. Remember that the base of the figure has overall morphs to adjust the base and table width and height.

Basic Iron Cuffs smart props are supplied to be used in conjunction with poses for this Device.

Sled: The sled is a rail/track system with control lever, tool sled and track. There are size/shape morphs on most parts for length adjustments. The sled is what the other figures in the library will be attached to. The sled/track will fit right inside the Device 2 table figure.

Sled Blade 1: This figure is a tall blade that automatically positions and parents to the sled. It has some size and shape morphs. This can be used as a high speed blade to split your characters in half.

Sled Pole Base: This figure holds 3 different smart prop pole/shaft figures from the props library. It will automatically position and parent to the sled.  Choose the poles you want to add to it from the Device 2 props library.

Sled Saw: This figure is a large circular/buzz saw that automatically positions and parents to the sled. It can be used to saw your characters down the middle. Gruesome!

Sled Tool Base: This Tool base automatically positions and parents to the sled. There are smart prop attachments in the props folder that can be added to this Tool base.
-------------------------------
Table Props Library:

Center Pad: This is a smart prop center pad that will fill the gap between the restraint table/Device 2 figure. It has some length/width morphs for adjustment. You can use this if you don't want to use the sled figure and just want the table to have no gap.
-------------------------------
Tool Holder Library (contains smart prop tools for the Tool Holder Figure and Pole Holder figure)

Holder Blade: Smart prop for Tool Holder figure: This blade can pivot up and down like a cutter. It has blade shape morphs.

Holder Pick:  Smart prop for Tool Holder figure: This pick can be used to stab a person. It has size/shape morphs.

Holder Pole Mount:  Smart prop for Tool Holder figure: This pole holder will cover/hide the slot on the Tool Holder figure and act as a holder for the smart prop poles that are also provided.

Holder Shield:  Smart prop for Tool Holder figure: This shield looks cool and can act as a splash guard for the Tool Holder.

------
Pole descriptions: (These poles come as stand alone, smart prop for Tool Holder and smart prop for Pole Holder)

Pole 1: This pole looks like a big drill bit. Very nasty. It has some size and shape morphs.

Pole 2: This Pole is pretty much a brutal dildo with some size and shape morphs.

Pole 3: This is a punching pole with cruel knobs to inflict pain. It can use your character as a punching bag. It has size/shape morphs

All these poles are marked in the library as "Stand Alone", "Tool Holder Pole" or "Pole Holder Pole".
------------------------------------------------------------------------------------------------------------------------------
A more detailed readme file and pdf is included in the product zip file.



Downloads

 
 

Application Compatibility

Daz StudioDaz Studio 4.10
PoserNot Tested
Other Notes
(Poser only version is sold separatley)

Figure Compatibility

Daz FiguresGenesis 8Genesis 8 Female
  Genesis 8 Male
Other Notes
(V4/M4 support is in the Poser version, sold separatley)


Required Products


Required 3rd Party Products
Genesis 8 Male and Female (https://www.daz3d.com/genesis-8-starter-essentials)

Related Products

Terminus 5 "Cruel and Unusual Pack 1" for DazStudio
$14.95
 
Terminus 5 "Impalement Pack" For DS 4.11+
$19.95
 
Terminus 5 "Hanging Pack 4" For DS 4.11+
$19.95
 
Terminus 5 "Hanging Pack 3" For DS 4.11+
$19.95
 
Terminus 5 "Cuffs Pack" For DazStudio 4.11+
$12.95
 
Terminus 5 "Hanging Pack 2" For DSt 4.11+
$19.95
 
Terminus 5 "Hanging Pack 1" For DS 4.11+
$19.95
 
Terminus 5 Core Pack For DS 4.11+
$22.95
 


Terminus 5 "Cruel And Unusual Pack 2" For DazStudio

SKU: 63045
By: DavoFreeone

Taking Cruel and Unusual to the next level for the Terminus 5 sets. This package has a unique restraint table and literal 'pain train' rail system that delivers the final blow.

$17.95



 
Views: 17276

Others Also Purchased

Terminus 5 Garrotes "Equipment Pack 1" for DazStudio
$16.95
 
Terminus 5 Decapitators "Equipment Pack 2" For DazStudio
$15.95
 
Terminus 5 Decapitators "Equipment Pack 1" for DazStudio
$16.95
 
Terminus 5 "Decapitators Core Pack" For DazStudio
$17.95
 
Terminus 5 "Cruel and Unusual Pack 3" For DazStudio
$15.95
 
Terminus 5 "Cruel and Unusual Pack 1" for DazStudio
$14.95
 
Terminus 5 "Hanging Pack 4" For DS 4.11+
$19.95
 
Terminus 5 "Hanging Pack 3" For DS 4.11+
$19.95
 
Terminus 5 "Hanging Pack 1" For DS 4.11+
$19.95
 
Terminus 5 Core Pack For DS 4.11+
$22.95
 

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.