Chamber 5 CORE PACKAGE for DS and Poser
davo_chamb5core_popup01-(2).jpg davo_chamb5core_popup02-(1).jpg davo_chamb5core_popup03-(1).jpg davo_chamb5core_popup04-(1).jpg davo_chamb5core_popup05-(1).jpg davo_chamb5core_popup06-(1).jpg davo_chamb5core_popup07.jpg davo_chamb5core_popup08.jpg


Product: Chamber 5 "Core" package

Vendor/Creator: Davo or Davorama
Need Help?  Support email in product zip readme file
store support forum:
Copyright (c) 2023 davo. All rights reserved. Not intended for redistribution.
Who's behind the glass watching?  Now you know. An amazing observation and computer conrol room for your stories and art.
SPECIAL NOTE 1: Posing for G8 figures is based on the STANDARD, NON-MORPHED OR ALTERED figures. If you have applied morphs or altered body shapes or proportions, you must manually adjust the character and device positions if connection points are not touching. If you do have to alter the poses, you can do this to one side of the device and one side of your character then use the symmetry  command to mirror the result to the other side.
System Requirements for Daz Studio:
- PC and Mac compatible
- Requires Daz Studio 4+ (created using Daz Studio 4.2)
- All files in .duf, .ds*, .png and .jpg format.

System Requirements for Poser:
- PC and Mac compatible
- Requires Poser 11+ (backward compatible to Poser 8 except readme notes python scripting may not work on older versions)  
- All files in .obj, .cr2, .png and .jpg format.

Package Features: (described below for Daz Studio, Poser is similar)

Chamber 5 Folder
- Camera: This is an articulated security/viewing camera. You can place this in the Observation Room or any other room. Most parts have size/shaping morphs for customization.

- Chair: This is a simple office chair with some morphing parts. Pose files for chair and character are provided in the pose library.

- Observation Room: This is an observation room with viewing window that can look into another room for observation or control.
The window wall has 2 roll up doors/shields that move up and down. The window wall also has a height morph to make the window taller and morphs on the rollup doors/shield to compensate for the window height morph.
The side walls and door wall have length morphs and can be tilted to allow for a better view into the room.  Lamp on the ceiling is repositionable, door opens and closes.
There are some computer banks and monitors in the scene. The middle table, middle bottom monitor and middle top monitor control movement of the other tables/monitors.  The end/side table portions have a taper width to account for side wall tilting.
Many of the material zones on this set have ambient/emmissive properties that will allow them to glow in a dimly lit scene.
A pre-parented equipment/chair/observation room is available in the Obs Room Combos folder.
Material Pose file is provided to change the default computer screens to an emergency alert screen.

- Room 1: This is a stand alone room with a posable rollup door on each end. There is some ceiling lamps, a cable/hose prop and track that can be used sort of like a conveyor belt on the floor. Track size/shape morphs.  You can hide the doors on the ends and place as many of these Room 1 figures end to end to create a long corridor if you wish.
There is a pre-parented set of combos in the Room 1 Combos folder.

Obs Room Combos subfolder

- Obs Room Equip Combo: This is simply the observation room, 2 chairs and most of the equipment or room props already attached to the appropriate walls.

Room 1 Combos subfolder
- Obs Room Single: This is a pre-parented combo of the observation room, equipment and a single Room 1 figure attached.

- Room 1 Triple: This is a pre-parented combo of the observation room, equipment and a three Room 1 figure end to end attached.

Equipment Props subfolder

- Emergency Light: Simple wall or ceiling mounted ligth with ambient/emmissive material zones that will glow in dimly lit scene.

- Equipment 1: A simple vent type prop for air circulation. Has size/shape morphs.

- Equipment 2: Tall rack like computer equipment. Has size/shape morphs.

- Equipment 3: Wall mounted computerized equipment. Has size/shape morphs.

- Equipment 4: Wall mounted circuit breaker style piece of computer equipment. (Might be memory intensive or slow down your scene)

- Equipment 5: Wall mounted emergency shut-off control panel.

- Kill Switch: This is one of those self destruct type buttons. The box has 3 morphs for different open lid positions.

- Microphone: Simple microphone with some bending morphs. Place where desired.

These props are all used in the Obs Room Combo room, pre-parented to appropriate room parts.

Material Options subfolder
You can use these material pose files to change the Emergency Light color to be on (bright) or off (non emmissive)

Material Options subfolder
You can use these material pose files to change the mood in your observation room from default to emergency alert.
Pose Subfolders
Chair Poses
G8M and G8F chair poses are provided for the chair and matching poses for G8M and G8F.
Parent G8M or G8F to the chairs "seat" body part, then apply the poses for the chair and G8M and G8F.  The chair will swivel around and face the window wall of the observation room and place the chair at the center console of the table. You can manually move the base of the chair to a new position if desired.
Obs Room Poses
There are some default poses for the room and windows/shield doors.  The Window default and Window Taller pose will raise the top of the viewing window up a higher, it will also apply the shield door morphs to accommodate the shift in size.
The Shields open and close pose will open and close the window shield doors. If you use the Window Taller pose, you will have to manually adjust the shield doors position.
Read First icons: Most folders contain a "READ FIRST" icon. By clicking this icon, an informational dialog box will pop up with pertinent information regarding the contents of the folder. Please read these notes and it is helful.
A more detailed readme file is included in the product zip file.



Application Compatibility

Daz StudioDaz Studio 4.21
PoserPoser 10
 Poser 11
 Poser 12

Figure Compatibility

Daz FiguresGeneration 4Michael 4
  Victoria 4
 Genesis 8Genesis 8 Female
  Genesis 8 Male

Product Requirements

Other Notes
(Poses work for G8F base (free) and V4.2 (from Daz3d))

Related Products

Chamber 4 "Electro Pack e-Stims" for Daz Studio
Chamber 4 "Electro Pack" for DazStudio
Chamber 4 "Core Package" For DazStudio

Chamber 5 CORE PACKAGE for DS and Poser

SKU: 67643
By: Davo

Who's watching? Take control with this control room and viewing compartment. Loaded with lot's of electronics and great companion to any set you have that you need a control room.


Views: 16506

Others Also Purchased

Chamber 7
Chamber 6
Labworks 2 Equipment Pack 1 for DS and Poser
Labworks 2 CORE PACKAGE for DS and Poser
Legacy Labworks 1 CONFINED LAB texture and G9 Support expansion pack
Legacy Labworks 1 CONFINED LAB for DS
Legacy Davo: Labworks 1 Adult Expanion Texture Expansion for DS
Legacy Davo: Labworks 1 "Adult Expansion" for DS
Devious Devices 07 DS and Poser Versions
Vendo Box Storage Facility Equipment Pack 1 for DS and Poser

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.