Renderotica
»
Store Products
»
Product Support
»
Meipe
»
MATCOPY script in Futalicious V3.2 doesn't seem to copy material
Rank: Member
Joined: 6/28/2015(UTC)
Posts: 24
Thanks: 5 times
Was thanked: 1 time(s) in 1 post(s)
|
I purchased the latest versions of Diktator and Futalicious today for use with G8M and G8F respectively.
The installation of Diktator went fine and the MAT_COPY script seems to do a brilliant job of matching body colour to dick .
I seem to be having a problem with the same script in Futalicious, however, where it seems to be not matching body colour.
Having selected the G8F I attach the Futilicious and it appears in the viewport in place on the G8F. Keeping G8F selected I then run the MAT_COPY script. Nothing seems to happen. When I ran the similar script in Diktator I got a confirmation message box showing the files copied. This doesn't happen in Futatlicious. Finally, with G8F selected I load the Futatlicious Shell. Changing the selection to the shell I can then adjust colours, etc.
However, I seem to be left with 2 triangles at the corners of the genital area which remain white and untextured.
Any ideas? It's probably me making a stupid mistake. Just strange that the textures in Diktator were successfully copied to the graft, whereas in Futalicious they aren't.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC)
Posts: 1,522
Thanks: 1284 times
Was thanked: 1468 time(s) in 722 post(s)
|
You should get a feedback message... do you have some error in the log file? Meipe attached the following image(s):
|
|
|
|
|
|
Rank: Member
Joined: 6/28/2015(UTC)
Posts: 24
Thanks: 5 times
Was thanked: 1 time(s) in 1 post(s)
|
I just retried to load Futalicious on to the G8F.
The geograft appears and attaches. Then when I run the script to gather the existing texture(s) and transfer to Futalicious I do not get any confirmation of files being copied. I DID get this confirmation when I ran the equivalent script on the Diktator.
Just checked the entry covering me trying to install Futalicious:
2020-10-11 21:12:31.010 Loading script: E:/My DAZ 3D Library/People/Genesis 8 Female/Anatomy/Futalicious v3.2/0-Click Here first v3.2.dsa
2020-10-11 21:12:36.129 Script executed successfully: E:/My DAZ 3D Library/People/Genesis 8 Female/Anatomy/Futalicious v3.2/0-Click Here first v3.2.dsa
2020-10-11 21:12:40.146 File loaded in 0 min 0.2 sec.
2020-10-11 21:12:40.147 Loaded file: 1_Futalicious Genitalia v3.2.duf
2020-10-11 21:12:46.449 Loading script: E:/My DAZ 3D Library/People/Genesis 8 Female/Anatomy/Futalicious v3.2/2_Futalicious_Material Copy 3.2.dse
2020-10-11 21:12:46.455 DEBUG: start
2020-10-11 21:12:46.461 Script executed successfully: E:/My DAZ 3D Library/People/Genesis 8 Female/Anatomy/Futalicious v3.2/2_Futalicious_Material Copy 3.2.dse
2020-10-11 21:13:04.417 File loaded in 0 min 0.0 sec.
2020-10-11 21:13:04.417 Loaded file: 3_Futalicious Shell v3.2.duf
|
|
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC)
Posts: 1,522
Thanks: 1284 times
Was thanked: 1468 time(s) in 722 post(s)
|
Ok, I'll try to reproduce the bug
|
 1 user thanked Meipe for this useful post.
|
|
|
|
Rank: Member
Joined: 6/28/2015(UTC)
Posts: 24
Thanks: 5 times
Was thanked: 1 time(s) in 1 post(s)
|
Just purchased Golden Palace for G8F.
I'm getting the same problem as above: a white untextured triangular shape in the pubic area (is this the untextured shell??) and no confirmation that the material transfer script has successfully run. This is soooooo strange as when I installed the Diktator and ran the similar script it successfully transferred the textures and a confirmation box came up.
I've checked that the Futalicious and Golden Palace are installed to the correct folder levels and everything seems to be ok there.
Bizarre that one product is working fine and the other two seem to be falling over something.
The material transfer scripts show as encrypted...is this correct? From what I can gather it is.
|
|
|
|
|
|
Rank: Member
Joined: 6/28/2015(UTC)
Posts: 24
Thanks: 5 times
Was thanked: 1 time(s) in 1 post(s)
|
OK...I seem to have sorted it. Basically I deleted everything I had installed and then re-installed all the products on my main C:\ drive. For whatever reason two of the products just didn't like living on my external hard drive (despite the file/folder structire being identical).
I've just tested all the products and, fingers crossed, everything seems to work.
|
1 user thanked sandman_dreaming for this useful post.
|
|
|
|
Rank: Newbie
Joined: 4/1/2016(UTC)
Posts: 5
|
Lucky for you sandman! Ive been having the same exact issue: I am always getting a grey triangle genitalia. No matter what I try and Ive tried A LOT of things. When I try the apply MAT script it unselects genesis 8 female and nothing happens.I checked the logs, it seems to be working and indeed when I look at the mats of genesis 8 they seem to have been copied but everything is grey. Everything is installed fine, everything has been installed and reinstalled multiple times... For the life of me I just cant figure out WHY the genitalia always appear all grey. Ive checked every single surface settings on the genitalia, Ive tried using the product on at least 10-15 different genesis 8 female characters, its always the same exact issue: grey genitalia.
|
|
|
|
|
|
Rank: Newbie
Joined: 7/8/2016(UTC)
Posts: 5
Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: Julzjuice  Lucky for you sandman! Ive been having the same exact issue: I am always getting a grey triangle genitalia. No matter what I try and Ive tried A LOT of things. When I try the apply MAT script it unselects genesis 8 female and nothing happens.I checked the logs, it seems to be working and indeed when I look at the mats of genesis 8 they seem to have been copied but everything is grey. Everything is installed fine, everything has been installed and reinstalled multiple times... For the life of me I just cant figure out WHY the genitalia always appear all grey. Ive checked every single surface settings on the genitalia, Ive tried using the product on at least 10-15 different genesis 8 female characters, its always the same exact issue: grey genitalia.
I know this is a couple months old, but this is what brought me here too. Exact same problem. Select the figure, use the copy mat script, deselects figure, nothing happens. Log says it executed correctly.
|
|
|
|
|
|
Rank: Member
Joined: 4/25/2015(UTC)
Posts: 14
Thanks: 1 times
Was thanked: 9 time(s) in 7 post(s)
|
@darkrepast Is your G8F a root node? The problem you are experiencing will happen if it is not, although there could be other causes as well...
Attached screenshot is an example for which the script will not work. Zattica attached the following image(s):
|
1 user thanked Zattica for this useful post.
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC)
Posts: 1,522
Thanks: 1284 times
Was thanked: 1468 time(s) in 722 post(s)
|
With every graft update I upload, I include new versions of the Mat Copy script that supports grouping. A fix for Futalicious will come soon.
|
|
|
|
|
|
Rank: Newbie
Joined: 7/8/2016(UTC)
Posts: 5
Thanks: 1 times
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: Zattica
@darkrepast Is your G8F a root node? The problem you are experiencing will happen if it is not, although there could be other causes as well...
Attached screenshot is an example for which the script will not work.
That was it! I had the character grouped. Really appreciate it! :)
|
|
|
|
|
|
Renderotica
»
Store Products
»
Product Support
»
Meipe
»
MATCOPY script in Futalicious V3.2 doesn't seem to copy material
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.