Help with Brestacular - Breast area is cream colored
Options
Go to last post Go to first unread
Previous Topic Next Topic
wayneout  
#1 Posted : Thursday, December 17, 2020 12:03:08 AM(UTC)
wayneout

Rank: Newbie

Joined: 7/15/2020(UTC)
Posts: 1

I load Breastacular graft and then the shell. The Breast area is a bright white. I then use the update materials and then
then the breast area turns "cream colored". It rendders white. I have used the shell fix but that doesn't help.  I am using
Golden Palace as well. I have tried using Breastacular before and after Golden Palace but it still stays the cream colored. 
I am not an expert with the surface area but when checking both torso and breastacular have the same map. If I can figure out how to
add an image to this post I will.  All I can find is adding an image by url. 


wayneout attached the following image(s):
problem.png
Back to top
matt  
#2 Posted : Thursday, December 17, 2020 1:08:37 AM(UTC)
matt

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 623

Thanks: 305 times
Was thanked: 396 time(s) in 255 post(s)

Originally Posted by: wayneout Go to Quoted Post


I load Breastacular graft and then the shell. The Breast area is a bright white. I then use the update materials and then
then the breast area turns "cream colored". It rendders white. I have used the shell fix but that doesn't help.  I am using
Golden Palace as well. I have tried using Breastacular before and after Golden Palace but it still stays the cream colored. 
I am not an expert with the surface area but when checking both torso and breastacular have the same map. If I can figure out how to
add an image to this post I will.  All I can find is adding an image by url. 



Are you using Golden Palace with multiple shells, like the ones that come with Pussy Wizard? You have to run the shell fix on all of them.
Back to top
Cryphius3DX  
#3 Posted : Thursday, December 17, 2020 12:57:00 PM(UTC)
Cryphius3DX

Rank: Advanced Member

Joined: 6/14/2017(UTC)
Posts: 159

Thanks: 177 times
Was thanked: 69 time(s) in 41 post(s)

Originally Posted by: matt Go to Quoted Post


Originally Posted by: wayneout Go to Quoted Post


I load Breastacular graft and then the shell. The Breast area is a bright white. I then use the update materials and then
then the breast area turns "cream colored". It rendders white. I have used the shell fix but that doesn't help.  I am using
Golden Palace as well. I have tried using Breastacular before and after Golden Palace but it still stays the cream colored. 
I am not an expert with the surface area but when checking both torso and breastacular have the same map. If I can figure out how to
add an image to this post I will.  All I can find is adding an image by url. 



Are you using Golden Palace with multiple shells, like the ones that come with Pussy Wizard? You have to run the shell fix on all of them.



to add what matt said, you can always go into the shells under Parameters and make sure other graphs are OFF. So if you are using Golden Palace and Breastacular, if you look in Breastacular's Shell Parameters you should see Golden Palace nodes OFF. This is the same for everything. If you have futalicious, you can see in the parameters of the shell for ALL other geografts should be OFF. This is helpful when you are adding a geographt that Meipe didnt make.
Back to top
thanks 2 users thanked Cryphius3DX for this useful post.
Zeppelin on 12/17/2020(UTC), Meipe on 12/22/2020(UTC)
Zeppelin  
#4 Posted : Thursday, December 17, 2020 6:46:10 PM(UTC)
Zeppelin

Rank: Advanced Member

Joined: 3/14/2013(UTC)
Posts: 404

Thanks: 537 times
Was thanked: 150 time(s) in 130 post(s)


to add what matt said, you can always go into the shells under Parameters and make sure other graphs are OFF. So if you are using Golden Palace and Breastacular, if you look in Breastacular's Shell Parameters you should see Golden Palace nodes OFF. This is the same for everything. If you have futalicious, you can see in the parameters of the shell for ALL other geografts should be OFF. This is helpful when you are adding a geographt that Meipe didnt make.





Thanks, I have been trying to figure this out for a long time.

Edited by user Thursday, December 17, 2020 6:50:47 PM(UTC)  | Reason: Not specified
Back to top
thanks 1 user thanked Zeppelin for this useful post.
Meipe on 12/22/2020(UTC)
3DSaga  
#5 Posted : Monday, December 28, 2020 3:05:52 PM(UTC)
3DSaga

Rank: Advanced Member

Joined: 5/20/2020(UTC)
Posts: 61

Was thanked: 25 time(s) in 24 post(s)
I'm having the same issue. My figure is also using Golden Palace.

When I go to the Parameters tab, how do I tell if the grafts are off? How do I turn them off?

I haven't found any reference to this step in the product tutorial.
Back to top
sumigo  
#6 Posted : Monday, December 28, 2020 3:54:06 PM(UTC)
sumigo

Rank: Advanced Member

Joined: 12/18/2012(UTC)
Posts: 1,200

Thanks: 226 times
Was thanked: 134 time(s) in 121 post(s)

Originally Posted by: Onesixthwarrior Go to Quoted Post
I'm having the same issue. My figure is also using Golden Palace.

When I go to the Parameters tab, how do I tell if the grafts are off? How do I turn them off?

I haven't found any reference to this step in the product tutorial.


 


When in the Parameters tab, select the item you want to 'turn off' or check, make sure its the item in questions and not one of it's sub-nodes (for example the items 'hip').


 


Then once the item is selected scroll down the different 'parameters' until you see the following buttons:


 


Visible


Visible in Render


Selectable in Viewport


Visible in Viewport


Show Bones


Visible in Simulation


 


Toggle these on or off until you get the desired results.


You can also toggle on/off the 'Visible in VIewport' function by clicking on the icon that looks like an actual eye to the left of the description of the respective node in the node tab. 


 


Click on the geografts 'eye' icon, it should now show the 'eye' as shut.


 


Rinse and repeat these processes or play around with them until you get the desired results.
Back to top
3DSaga  
#7 Posted : Monday, December 28, 2020 8:44:07 PM(UTC)
3DSaga

Rank: Advanced Member

Joined: 5/20/2020(UTC)
Posts: 61

Was thanked: 25 time(s) in 24 post(s)
Sumigo, thanks so much for your help! Clicking the eye icon makes it work. In fact, it seems to even make Golden Palace look a bit better.
Back to top
thanks 1 user thanked 3DSaga for this useful post.
sumigo on 12/29/2020(UTC)
jimbojones  
#8 Posted : Tuesday, December 29, 2020 12:42:38 PM(UTC)
jimbojones

Rank: Member

Joined: 8/25/2018(UTC)
Posts: 29

Thanks: 2 times
Was thanked: 10 time(s) in 9 post(s)

What i have done is If i use breastacular and run another add ons such as Golden Palace or any other effect that has a shell along with it, i just click on the shell and click shell fix from either breastacular or golden palace menu and it solves any white problem areas. Sometimes i have to find which shell is gving the problem of the white area, i can still use the shell fix and it corrects other shells that may be conflict also.
Back to top
sumigo  
#9 Posted : Tuesday, December 29, 2020 1:26:31 PM(UTC)
sumigo

Rank: Advanced Member

Joined: 12/18/2012(UTC)
Posts: 1,200

Thanks: 226 times
Was thanked: 134 time(s) in 121 post(s)

Something like this should be made a permanent FAQ on this site, especially since all of Meipes items (Breastacular, Dicktator, Fender Blender, Golden Palace etc) are exclusive to this site.


 


Here is what I do whenever I get a new character, whether it's one from this site DAZ, Rendo or somewhere else.


 


I follow these steps when using Meipe's stuff, in this case Breastacular, Golden Palace and Fender Blender:


 


1. I load the character and make any morph modifications (anyone familiar with my work knows my models undergo major plastic surgery) 


2. Make any skin modifications like adding wet skin shaders if required (It usually is) or whatever else I intend to do.


     a. This includes makeup if used, lipstick, eye color changes, eyebrows (if not using fibermesh eyebrows) etc


     b. DO NOT ADD GEO SHELLS at this point including any wet skin geo shells, I do not use them anyway, I use shaders for my wet skin look, primarily 'Wet and Tan Skins' by V3Digitimes, but DO NOT ADD GEO SHELLS at this stage is my point.


3. Add Breastacular to the model


4. Run the Copy the Materials script


5. Run the Adjust to Rigging script also provided.


     a. This is then where I personally take the time to add my nipple and areola morphs, but not required for the Skin Shader issue which is what this is for.


6. Save the model, name it etc


7. Add Golden Palace


     a. Add the Geo Shell, breastacular will turn slightly whitish when you do, ignore this for now.


     b. Add GP Labia Majora Geo Shell from the Pussy Wizard add-on if you have it and make any color changes provided on the Labia Majora and Labia Minora, If you don't have it ignore this step.


          i. Breastacular will turn completely white at this stage, ignore this for now.


     c. If you own the Stereo Love add-on, there is an anus material in that add on that has multiple variations for skin tone and anus shape. I recommend making these modifications at this time.


8. Add Fender Blender 


     a. Run the Copy Materials Script for Fender Blender, but it will stay white like Breastacular ignore this and go to step 9


9. Find the Shell Fix v2 script provided in Fender Blender, Breastacular or Golden Palace if you have the Storming the Palace add-on.


     a. Run the Shell Fix v2 on the Golden Palace Geo Shells, when you do both Breastacular and Fender Blender should both turn normal flesh toned.


10. If you don't have Fender Blender then skip step 8 and go to step 9.


11. Save your work


 


You should now have a fully grafted and material copied character ready to work with.


 


Any new Geo Shells added beyond this point that are visible in the render will now also make Breastacular 'White'. Simple run the Shell Fix Script from step 9 on the new Geo Shell, this could include a Geo Shell for Underwear like Vyktoria likes to do, a Wet Skin Geo Shell like Simon WM sells, or anything like that.


 


If you make a mistake re-load the character from your last save and try again!


 


I hope this helps and humply request that this be made a sicky or something.

Edited by user Tuesday, December 29, 2020 1:57:26 PM(UTC)  | Reason: Fixin stuff n stuff
Back to top
thanks 1 user thanked sumigo for this useful post.
Meipe on 12/30/2020(UTC)
BrimstoneOmega  
#10 Posted : Tuesday, December 29, 2020 6:59:32 PM(UTC)
BrimstoneOmega

Rank: Advanced Member

Joined: 2/28/2018(UTC)
Posts: 235

Thanks: 145 times
Was thanked: 125 time(s) in 86 post(s)

Originally Posted by: sumigo Go to Quoted Post


Something like this should be made a permanent FAQ on this site, especially since all of Meipes items (Breastacular, Dicktator, Fender Blender, Golden Palace etc) are exclusive to this site.



 


Yeah, I felt the same way, someone was having this issue the other day so I made a video going over the steps. I've added it to my signature so when this problem pops up again in two days one of us doesn't have to type out all the steps again. Your method of saving things incrementally is a good idea too, maybe you should add you post to your signature as well, lol.


How to Fix Your Geoshells
Back to top
Meipe  
#11 Posted : Wednesday, December 30, 2020 5:09:45 AM(UTC)
Meipe

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 1,522

Thanks: 1284 times
Was thanked: 1468 time(s) in 722 post(s)
Back to top
Zeppelin  
#12 Posted : Wednesday, December 30, 2020 10:16:59 AM(UTC)
Zeppelin

Rank: Advanced Member

Joined: 3/14/2013(UTC)
Posts: 404

Thanks: 537 times
Was thanked: 150 time(s) in 130 post(s)

Originally Posted by: Meipe Go to Quoted Post


All the current resources about this topic:

BrimstoneOmega's great videotutorial

www.youtube.com/watch?v=fyeYJTPxflI

The current shell fix scrips available for the community:

Omni's one:

https://www.dropbox.com/...ll%20Fix%20Omni.dsa?dl=0

Meipe's one:

https://www.dropbox.com/...hell%20Fix%20v2.dse?dl=0



 


Thanks Meipe, but the links to the dropbox shell fixes do not work for me, I get a 4X error

Edited by user Wednesday, December 30, 2020 10:20:03 AM(UTC)  | Reason: Not specified
Back to top
Meipe  
#13 Posted : Saturday, January 2, 2021 12:04:09 PM(UTC)
Meipe

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 1,522

Thanks: 1284 times
Was thanked: 1468 time(s) in 722 post(s)
Back to top
thanks 1 user thanked Meipe for this useful post.
Zeppelin on 1/4/2021(UTC)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2026, Yet Another Forum.NET
This page was generated in 0.453 seconds.

Notification

Icon
Error