Rank: Newbie
Joined: 3/23/2015(UTC) Posts: 6
Thanks: 19 times
|
Hi,
tried to fit the Caged XY https://www.renderotica.com/store/sku/62936_Caged-XY to my XY 1.5 https://www.renderotica.com/store/sku/59565_XY
But it doesn' work correctly. What do I do wrong?
Thank you,
RonnyDe
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC) Posts: 221
Thanks: 22 times Was thanked: 51 time(s) in 39 post(s)
|
I'm not sure what you did but it looks like you didn't load it correctly. Select "XY" in your "scene" pane and with it selected load one of the wearable presets (dbxxx-Caged XY-00 Caged XY).
|
|
|
|
Rank: Newbie
Joined: 3/23/2015(UTC) Posts: 6
Thanks: 19 times
|
Originally Posted by: dbxxx I'm not sure what you did but it looks like you didn't load it correctly.
Select "XY" in your "scene" pane and with it selected load one of the wearable presets (dbxxx-Caged XY-00 Caged XY).
After a restart of DAZ it works. Thank you.
|
|
|
|
Rank: Newbie
Joined: 3/23/2015(UTC) Posts: 6
Thanks: 19 times
|
Ok... it worked only once
Here are my steps what I do:
- Load a G8M character
- Load db xxx-1. XY
- Select db xxx-1. XY in scene tab
- Load dbxxx-Caged-XY-00 Caged XY
Does the product work without any problems for someone else?
Regards
RonnyDe RonnyDe attached the following image(s):
|
|
|
|
Rank: Advanced Member
Joined: 2/14/2016(UTC) Posts: 603
Thanks: 30 times Was thanked: 308 time(s) in 243 post(s)
|
By the look of your images it looks like your XY is not fitting to G8M, make sure when you load XY you have G8M selected in the scene, if he is selected then it will autofit the graft to G8M, if not you would have to manually fit to G8M. Also make sure you don't have the bone editor or geometry editor tools active as those will break graft functionality as long as they are active.
|
1 user thanked BrotherHades for this useful post.
|
|
|
Rank: Newbie
Joined: 3/23/2015(UTC) Posts: 6
Thanks: 19 times
|
Originally Posted by: BrotherHades
By the look of your images it looks like your XY is not fitting to G8M, make sure when you load XY you have G8M selected in the scene, if he is selected then it will autofit the graft to G8M, if not you would have to manually fit to G8M. Also make sure you don't have the bone editor or geometry editor tools active as those will break graft functionality as long as they are active.
Ny G8M figure is selected... i tested it also with different G8m figures, also G8M starter. But it's always the same.
I also loaded XY standalone and manually fit to G8M. Same issue.
Fun fact: All poses from XY (errected, etc.) are working. Only XY Caged doesn't worked.
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC) Posts: 221
Thanks: 22 times Was thanked: 51 time(s) in 39 post(s)
|
XY deasn't look fitted. Please make sure as "BrotherHades" said that you don't have "Geometry editor", "Joint editor" or "Node weight map brush" tool selected.
|
|
|
|
Rank: Newbie
Joined: 3/23/2015(UTC) Posts: 6
Thanks: 19 times
|
Originally Posted by: dbxxx XY deasn't look fitted. Please make sure as "BrotherHades" said that you don't have "Geometry editor", "Joint editor" or "Node weight map brush" tool selected.
Hy DBXXX,
ok, the dbxxx-XY anatomy works. But the caged version is somehow flawed :(
I do any step with the selected universal tool.
What are your current parameters (from the right tab), when you activate the dbxxx-Caged prop/pose?
Regards RonnyDe attached the following image(s):
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC) Posts: 221
Thanks: 22 times Was thanked: 51 time(s) in 39 post(s)
|
It's not "Caged XY" it's your "XY". As you can see on the image your XY looks different then mine, like it's pose is not default. Either try resetting it's pose parameters or reinstall it and "Caged XY" should work.
dbxxx attached the following image(s):
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.