Renderotica
»
Store Products
»
Product Support
»
FemTec Suspension Straps not working on G8M
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
Hi,
when I load this Product:
https://www.renderotica.com/store/sku/62278_Suspension-Straps-For-Genesis-8-Female
On G8M, the morphs does nothing, normally should autofit not kill the morphs O_o
Any idea how to fix it?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 3/2/2015(UTC)
Posts: 243
Thanks: 20 times
Was thanked: 55 time(s) in 46 post(s)
|
You need to the Genesis 8 Cross-Figure Resource Kit from DAZ to get the straps to work; then it will with to G8M without autofitting, which will mess up the straps.
This is also a content development tool, so if vendors don't want to make separate wearables for the figures, this should help make them work for both. Edited by user Wednesday, September 16, 2020 3:32:33 AM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
I never heard from that O_o....
I also never had the problem that a G8F item with morphs did no longer not work on G8M, thats the first item where it happens :/
But thanks for your answer.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 3/2/2015(UTC)
Posts: 243
Thanks: 20 times
Was thanked: 55 time(s) in 46 post(s)
|
Autofit doesn't work for every item and the straps consist of several parts so there would be no way autofit would preserve everything.
I had the same issue with the straps and ran the Cross-Figure utility against that and the product works fine.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
Yeah I found a tutorial for it.
https://www.deviantart.c...With-Genesis-8-761293642
But didnt find the time now also.... it sucks a bit that now need a other product for this ONE time... all other cuffs, straps etc, works, even when the most are just made for G8F.
sadly the big sale for it is just over
|
|
|
|
|
|
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
Thats the best Result I got so far, WITHOUT any addon!
Load the wearable (G8F) on the male, BUT cancel autofit, then parent it to the bodypart, in this case, parent to foot Right.
Then you can use the adjustment sliders, I also increased the smoothing +2.
I found the problem with autofit: When it autofit, it does destroy the rigging, normally is under the foot bone the straps and the ring, but after autofit, there are the toes.
 -----> 
Thats why the morphs can no longer find the bones :/
Rotating the hand/feet will make problems, so... *sigh* seems like I NEED to convert it correct :( Edited by user Thursday, September 17, 2020 6:03:12 AM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
I was now able to convert it, using a Cross figure script. Img: https://i.imgur.com/lNvDMz7.pngBut I get always a duplicate ID error :( I need to find out how to fix it.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 3/2/2015(UTC)
Posts: 243
Thanks: 20 times
Was thanked: 55 time(s) in 46 post(s)
|
Originally Posted by: Spanko  I was now able to convert it, using a Cross figure script.
Img: https://i.imgur.com/lNvDMz7.png
But I get always a duplicate ID error :(
I need to find out how to fix it.
Find out which item is causing it and see if you can edit the file (if not, i think you can rename the file to .zip then open it and the editable file should be there). Go to the bottom of the dsf file and you should see a line that has "ID" somewhere in it.. .if the name doesn't have a "-1" at the end, add it, then save. This should get rid of the error as you've made the id unique by adding the "-1" to it.
I'm remembering this from memory, but the gist is that you need to add the "-1" to the id of the wearable and that will remove the error.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
Originally Posted by: terrancew_hod
Originally Posted by: Spanko I was now able to convert it, using a Cross figure script.
Img: https://i.imgur.com/lNvDMz7.png
But I get always a duplicate ID error :(
I need to find out how to fix it.
Find out which item is causing it and see if you can edit the file (if not, i think you can rename the file to .zip then open it and the editable file should be there). Go to the bottom of the dsf file and you should see a line that has "ID" somewhere in it.. .if the name doesn't have a "-1" at the end, add it, then save. This should get rid of the error as you've made the id unique by adding the "-1" to it.
I'm remembering this from memory, but the gist is that you need to add the "-1" to the id of the wearable and that will remove the error.
Sorry, my misstake, its not double ID, its Double Formula error.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 12/29/2019(UTC)
Posts: 92
Thanks: 5 times
Was thanked: 6 time(s) in 6 post(s)
|
Got it now fixed, thanks to a friend!
I wam asking in Daz3d forums if I am allowed to share the morphs, using the converter, then will I post the addon/fix here free.
Edit:
From the Forum Admin of Daz3d, I am NOT allowed to share the converted morphs -_-....
Edited by user Wednesday, September 23, 2020 5:55:05 PM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Renderotica
»
Store Products
»
Product Support
»
FemTec Suspension Straps not working on G8M
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.