Easy Rider Centaur Maxx issue - Issue with Easy rider for G8M when using Maxx Centaur
Options
Go to last post Go to first unread
Previous Topic Next Topic
haruchai  
#1 Posted : Friday, September 27, 2019 7:14:05 PM(UTC)
haruchai

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 166

Thanks: 121 times
Was thanked: 80 time(s) in 65 post(s)

Hi,


I'm having an issue with Easy rider for G8M when using Maxx Centaur from DAZ. All goes normally up to the material copy which appears to work fine (see pic 01) then I try to apply one of the shell presets at which point the whole body changes colour (see pic 02).


It looks like Hellboy did some jiggery pokery with the shell to get a smoother transition from human to horse and I'm wondering if that's messing it up.


Appreciate any help or advice.


haruchai attached the following image(s):
Maxx01.jpg
Maxx02.jpg
Back to top
Meipe  
#2 Posted : Sunday, September 29, 2019 6:40:49 AM(UTC)
Meipe

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 1,522

Thanks: 1284 times
Was thanked: 1468 time(s) in 722 post(s)
Back to top
haruchai  
#3 Posted : Sunday, September 29, 2019 8:20:36 PM(UTC)
haruchai

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 166

Thanks: 121 times
Was thanked: 80 time(s) in 65 post(s)
Thanks for the response, could you please outline the steps to achieve the above, not sure what you mean exactly.
Back to top
Cryphius3DX  
#4 Posted : Wednesday, October 2, 2019 4:29:31 PM(UTC)
Cryphius3DX

Rank: Advanced Member

Joined: 6/14/2017(UTC)
Posts: 159

Thanks: 177 times
Was thanked: 69 time(s) in 41 post(s)

Originally Posted by: haruchai Go to Quoted Post
Thanks for the response, could you please outline the steps to achieve the above, not sure what you mean exactly.


 


I think he's saying try to change the name of the character to a standard name
Back to top
butchsl  
#5 Posted : Thursday, October 10, 2019 8:01:06 PM(UTC)
butchsl

Rank: Advanced Member

Joined: 11/29/2013(UTC)
Posts: 840

Thanks: 69 times
Was thanked: 19 time(s) in 16 post(s)
On regular centaurs, both the "Male Centaur Body" and "Centaur Shell" are the same diffuse textures. On Maxx, the "Centaur Shell" has the horse diffuse texture, whereas the "Male Centaur Body" has a human skin texture - presumably to get the better transition.

I managed to get it to work after a bit of fiddling in the surfaces tab.
How much can a Koala bear?
Back to top
haruchai  
#6 Posted : Thursday, October 10, 2019 8:14:58 PM(UTC)
haruchai

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 166

Thanks: 121 times
Was thanked: 80 time(s) in 65 post(s)
Thanks for that butchsl.

Could you share what you did with your surfaces please?
Back to top
butchsl  
#7 Posted : Thursday, October 10, 2019 10:53:23 PM(UTC)
butchsl

Rank: Advanced Member

Joined: 11/29/2013(UTC)
Posts: 840

Thanks: 69 times
Was thanked: 19 time(s) in 16 post(s)
There may be a better way of doing this, but...

Load the shaft, anus and material copy as normal.

In "Materials v2" using the shell selector, apply the preset that you want. The body now turns the flesh colour.
In the scene tab, select the "Male Centaur Body" and go to surfaces tab. Find "1Coat" and change the base colour to "01_CentaurMaxxCoat_D".

You'll now see the gens and anus are textured, but the coat texture's still missing.

In scene tab, select the "easy rider shaft", go to surfaces tab and select "coat" - change the base colour texture to "01_CentaurMaxxCoat_D" and the colour should be all 1.00.

Repeat for the anus and the girl bits, if they're there.

Finally, in the scene tab, reselect Centaur Maxx HD and reload his "Centaur Maxx !All Mats Complete" material - this retextures the whole figure and will fix the transition between horse and human.

Good luck! Thunderstorm's about to hit here, so I may be off for a while.
How much can a Koala bear?
Back to top
thanks 3 users thanked butchsl for this useful post.
haruchai on 10/11/2019(UTC), Meipe on 10/12/2019(UTC), namjalicious on 3/18/2021(UTC)
haruchai  
#8 Posted : Friday, October 11, 2019 5:47:50 AM(UTC)
haruchai

Rank: Advanced Member

Joined: 9/15/2012(UTC)
Posts: 166

Thanks: 121 times
Was thanked: 80 time(s) in 65 post(s)
Thanks for that, really appreciated
Back to top
namjalicious  
#9 Posted : Thursday, March 18, 2021 10:49:42 PM(UTC)
namjalicious

Rank: Newbie

Joined: 1/29/2021(UTC)
Posts: 2

Thanks: 1 times

Originally Posted by: butchsl Go to Quoted Post
There may be a better way of doing this, but...

Load the shaft, anus and material copy as normal.

In "Materials v2" using the shell selector, apply the preset that you want. The body now turns the flesh colour.
In the scene tab, select the "Male Centaur Body" and go to surfaces tab. Find "1Coat" and change the base colour to "01_CentaurMaxxCoat_D".

You'll now see the gens and anus are textured, but the coat texture's still missing.

In scene tab, select the "easy rider shaft", go to surfaces tab and select "coat" - change the base colour texture to "01_CentaurMaxxCoat_D" and the colour should be all 1.00.

Repeat for the anus and the girl bits, if they're there.

Finally, in the scene tab, reselect Centaur Maxx HD and reload his "Centaur Maxx !All Mats Complete" material - this retextures the whole figure and will fix the transition between horse and human.

Good luck! Thunderstorm's about to hit here, so I may be off for a while.


Hi butchsl,


I tried your steps and on the textured shaded mode, It looks good and the shaft anus texture is blended. But when I tried to render it, it looks like this:


https://imgur.com/a/ZjrDBcA


https://imgur.com/a/ljYmf73


I tried to tweak the surface tab again but no luck. Any suggestion?
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2026, Yet Another Forum.NET
This page was generated in 0.250 seconds.

Notification

Icon
Error