Options
Go to last post Go to first unread
marsrei  
#1 Posted : Monday, September 24, 2018 7:21:21 AM(UTC)
marsrei

Rank: Newbie

Joined: 5/17/2018(UTC)
Posts: 2

When I load nothing else but Michael 8 and the three files of XY onto him, this is the result (see image).


The irregularly shaped blank area above the shaft occurs after loading the second file (MAT copy). It happens both with the first version of XY and with the updated version 1.2. Using DAZ 4.10.0.123 pro.


What am I doing wrong?


Thanks in advance!


 


marsrei attached the following image(s):
dbxxx.png
dbxxx  
#2 Posted : Monday, September 24, 2018 7:53:41 AM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
Hi,

What happened here is it changed your UV set for "torso" surface. Just go to "surfaces", select "torso", scroll down until you find "UV set" and set it to Base Male".
I'll check it out why that happened.
marsrei  
#3 Posted : Tuesday, September 25, 2018 4:28:29 AM(UTC)
marsrei

Rank: Newbie

Joined: 5/17/2018(UTC)
Posts: 2

Thank you! That helped.
Eroqua  
#4 Posted : Wednesday, April 10, 2019 11:31:29 AM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

Hi. I too have problems with copying the material. I followed the advice but nothing. I only find "bad base 2" in the uv set list (in addition to xy3, xy, default UVs)


dbxxx  
#5 Posted : Wednesday, April 10, 2019 12:52:26 PM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
Hi,
I'd need more info like which platform are you using win or mac? Scripts for some reason work differently on mac. After MAT copy script UV set should be XY3 so if you are on mac just set it to XY3.
Which set do you get chosen after you run MAT copy script?
Eroqua  
#6 Posted : Wednesday, April 10, 2019 2:21:14 PM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

Ok, sorry. The platform is win 7. I tried to choose all the items in the list (I select xy, in surfaces I select torso). Then I select the character and run the script. Always error


Eroqua  
#7 Posted : Wednesday, April 10, 2019 2:24:55 PM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

In the list I don't find "male base" but "male base 2". Is it influential?


dbxxx  
#8 Posted : Wednesday, April 10, 2019 3:24:10 PM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
That should not happen on windows. I have to ask do you load your character, select him in scene pane(name marked yellow) and just load all 3 parts(1. XY, 2. XY MAT copy, 3. XY Shell)? If you do that what UV set end's up selected on both XY material groups? It should be "XY3".
Eroqua  
#9 Posted : Wednesday, April 10, 2019 3:38:13 PM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

I did as you told me. The selected Uv map is xy3. It gives me an error message and does not copy the texture


 


dbxxx  
#10 Posted : Wednesday, April 10, 2019 6:13:32 PM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
The script should only be run with your character (genesis8male) selected, not XY.

The XY MAT copy script will change UV set for both XY materials so after setting them to XY3 manually there is no point running the script at all. If you manually set "UV set" do it after you run the script.

Which version of XY do you use? Only XY 1.5 should be used and if you use 1.5 did you remove old versions files(from your "my daz3d library\data\db xxx\)? If you have earlier version please update XY.

If you have the latest DazStudio and XY 1.5 (properly installed) and you still get that error please copy the error here or you log's last few lines.
Eroqua  
#11 Posted : Thursday, April 11, 2019 11:57:32 AM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

ok. I did the tests by selecting genesis 8 male. I organize myself and send photos of the error.


XY was purchased a few days ago (1.5). I have another product attached to it, XYHDM. I have no other products

Edited by user Thursday, April 11, 2019 12:05:40 PM(UTC)  | Reason: Not specified

Eroqua  
#12 Posted : Thursday, April 11, 2019 12:14:36 PM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

This is the log file...


2019-04-11 19:07:18.018 Loaded file: Genesis 8 Basic Male.duf
2019-04-11 19:07:18.419 Loaded image G8MBaseLegsMapD_1003.jpg
2019-04-11 19:07:18.489 Loaded image G8MBaseEyesMap02D_1007.jpg
2019-04-11 19:07:18.669 Loaded image G8MBaseArmsMapD_1004.jpg
2019-04-11 19:07:18.749 Loaded image G8MBaseMouthMapD_1005.jpg
2019-04-11 19:07:18.939 Loaded image G8MBaseFaceMapD01_1001.jpg
2019-04-11 19:07:19.129 Loaded image G8MBaseTorsoMapD_1002.jpg
2019-04-11 19:07:19.209 Loaded image G8MBaseEyelashesMapTR_1006.jpg
2019-04-11 19:07:20.778 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 89 unknown for QWidget)
2019-04-11 19:07:23.465 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 69 unknown for QWidget)
2019-04-11 19:07:23.985 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 68 unknown for QWidget)
2019-04-11 19:07:42.996 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 18 unknown for QWidget)
2019-04-11 19:07:45.466 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 28 unknown for QWidget)
2019-04-11 19:07:49.677 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 29 unknown for QWidget)
2019-04-11 19:07:53.271 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 30 unknown for QWidget)
2019-04-11 19:07:53.371 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:07:54.991 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 1 unknown for QWidget)
2019-04-11 19:07:55.922 File loaded in 0 min 0.6 sec.
2019-04-11 19:07:55.922 Loaded file: db xxx-1. XY.duf
2019-04-11 19:07:56.012 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.012 Loaded file: Plums size.dsf
2019-04-11 19:07:56.022 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.022 Loaded file: Penis size.dsf
2019-04-11 19:07:56.042 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.042 Loaded file: Penis length.dsf
2019-04-11 19:07:56.042 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.042 Loaded file: Penis flacid.dsf
2019-04-11 19:07:56.062 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.062 Loaded file: Penis bend.dsf
2019-04-11 19:07:56.072 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.082 Loaded file: JCM left plum back.dsf
2019-04-11 19:07:56.082 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.082 Loaded file: JCM both plums bend up.dsf
2019-04-11 19:07:56.102 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.102 Loaded file: JCM both plums bend down.dsf
2019-04-11 19:07:56.122 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.122 Loaded file: Foreskin04.dsf
2019-04-11 19:07:56.142 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.142 Loaded file: Foreskin03.dsf
2019-04-11 19:07:56.152 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.152 Loaded file: Foreskin02.dsf
2019-04-11 19:07:56.152 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.152 Loaded file: Foreskin01.dsf
2019-04-11 19:07:56.162 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.162 Loaded file: Foreskin.dsf
2019-04-11 19:07:56.172 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.172 Loaded file: Anus wide.dsf
2019-04-11 19:07:56.172 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.172 Loaded file: Anus default.dsf
2019-04-11 19:07:56.172 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.172 Loaded file: Penis default.dsf
2019-04-11 19:07:56.172 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.172 Loaded file: Base fix.dsf
2019-04-11 19:07:56.172 Loaded Morph Deltas in 0 min 0.0 sec.
2019-04-11 19:07:56.172 Loaded file: Anus real.dsf
2019-04-11 19:07:58.576 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 2 unknown for QWidget)
2019-04-11 19:07:58.756 Loading script: C:/Users/Administrator/Documents/DAZ 3D/Studio/My Library/People/Genesis 8 Male/Anatomy/dbxxx-XY/db xxx-2. XY MAT copy.dse
2019-04-11 19:07:58.756 Failed to load script: C:/Users/Administrator/Documents/DAZ 3D/Studio/My Library/People/Genesis 8 Male/Anatomy/dbxxx-XY/db xxx-2. XY MAT copy.dse
2019-04-11 19:08:02.429 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 3 unknown for QWidget)
2019-04-11 19:08:02.779 File loaded in 0 min 0.1 sec.
2019-04-11 19:08:02.779 Loaded file: db xxx-3. XY Shell.duf
2019-04-11 19:08:03.179 Loaded image db xxx-XY Shell.jpg
2019-04-11 19:08:03.350 Loaded image db xxx-XY C.jpg
2019-04-11 19:08:10.801 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:08:10.801 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:08:22.535 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:08:22.536 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:08:22.613 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:08:22.745 WARNING: libpng warning: iCCP: known incorrect sRGB profile
2019-04-11 19:08:41.765 WARNING: QAccessibleWidget::rect: This implementation does not support subelements! (ID 6 unknown for QWidget)


dbxxx  
#13 Posted : Thursday, April 11, 2019 1:41:42 PM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
Are you using 3delight rendering engine? Both XY and XY HDM are Iray products. They use a lot of Iray features and I don't think it will work with 3delight. If you are try switching to Iray.
Eroqua  
#14 Posted : Thursday, April 11, 2019 3:01:46 PM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

No, the rendering engine is Iray. Daz studio version is 4.10 Pro. I followed the steps. The default loaded Uv Map is XY3 (correct, I think). I don't know what to add ... :)
... I can try to uninstall XYHDM. Is useful?

dbxxx  
#15 Posted : Friday, April 12, 2019 6:01:14 PM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
I must ask again to check your DazStudio version.
I've tried it on Windows 7 and I got an error on DazStudio 4.10.0.107 but when I updated it to 4.10.0.123 the error disapeard.
Eroqua  
#16 Posted : Sunday, April 14, 2019 2:00:57 AM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

Ok. Thank you. This evening I check the program version.


Eroqua  
#17 Posted : Sunday, April 14, 2019 3:28:25 PM(UTC)
Eroqua

Rank: Advanced Member

Joined: 1/29/2016(UTC)
Posts: 143

Was thanked: 43 time(s) in 43 post(s)

I solved! I upgraded to version 4.10.0.123 as you recommended. Now it works (the previous version was 4.10.0.107)... Thanks


dbxxx  
#18 Posted : Sunday, April 14, 2019 6:01:20 PM(UTC)
dbxxx

Rank: Advanced Member

Joined: 5/31/2017(UTC)
Posts: 199

Thanks: 18 times
Was thanked: 37 time(s) in 32 post(s)
Glad I can help :)
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.451 seconds.

Notification

Icon
Error