Rank: Newbie
Joined: 7/22/2015(UTC)
Posts: 3
Thanks: 2 times
Was thanked: 1 time(s) in 1 post(s)
|
Hello,
after looking through the forum I suspect my issue might be related to others I read around grafts and rigidity, but I didn't see my specific effect. Apologies if I missed it.
After installing and then dialing in the morphs under Actor > Chest > Breastacular > 1- Shape Preset > Any of them, I only get a very small change above the breast area.
This happens after loading G9 and then moving the dial, I am not loading anything else into the scene.
Thanks in advance for any tips on where to look/start.
bigdsn00py69 attached the following image(s):
|
|
|
|
|
|
Rank: Newbie
Joined: 7/22/2015(UTC)
Posts: 3
Thanks: 2 times
Was thanked: 1 time(s) in 1 post(s)
|
Additional info:
I have uninstalled every G9 related purchase I have made besides the G9 Essentials and G9 Breastacular, and the problem still exists. I then uninstalled both completely and reinstalled G9 fresh and then G9 Breastacular fresh. Still get the same issue. I have checked that there are no other extra/unknown morphs applied and zeroed all the defaults like Mouth Realism, etc. and with literally zero morphs dialed in, still get the issue. I have also applied every G9 Breastacular fix from the forums/dropbox location which made no difference.
Unless the vendor or somebody has any other ideas I will need to request a refund as the product is not usable:(
|
|
|
|
|
|
Rank: Advanced Member
Joined: 1/4/2019(UTC)
Posts: 78
Thanks: 1 times
Was thanked: 50 time(s) in 36 post(s)
|
I had the same issue once when I first set this up to test on my G9 figures. Took me a while but I then discovered that unlike G8/8.1 where you can use the applicable breastacular morphs there without needing to attach the graft (Also negates the matt-copy problem on G8/8.1), on G9 you actually do have to attach the graft. I think this is where you could be getting you're issue as I had that the first time I installed it.
|
 1 user thanked kcam001 for this useful post.
|
|
|
|
Rank: Advanced Member
Joined: 2/14/2016(UTC)
Posts: 670
Thanks: 35 times
Was thanked: 371 time(s) in 288 post(s)
|
Originally Posted by: kcam001  I had the same issue once when I first set this up to test on my G9 figures. Took me a while but I then discovered that unlike G8/8.1 where you can use the applicable breastacular morphs there without needing to attach the graft (Also negates the matt-copy problem on G8/8.1), on G9 you actually do have to attach the graft. I think this is where you could be getting you're issue as I had that the first time I installed it.
This is because most of the G8/G8.1 breastacular breast morphs were applied at the figure level, not on the graft itself, where nipples were on the graft only. Also G8/8.1 didn't require the rigidity to fit right, so underlying morphs copied over to the graft. Where requiring rigidity to fit on G9 it acts to reduce/block morphs at the figure level, so all the morphs have to be built into the graft.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 2/14/2016(UTC)
Posts: 670
Thanks: 35 times
Was thanked: 371 time(s) in 288 post(s)
|
Originally Posted by: bigdsn00py69 Additional info:
I have uninstalled every G9 related purchase I have made besides the G9 Essentials and G9 Breastacular, and the problem still exists. I then uninstalled both completely and reinstalled G9 fresh and then G9 Breastacular fresh. Still get the same issue. I have checked that there are no other extra/unknown morphs applied and zeroed all the defaults like Mouth Realism, etc. and with literally zero morphs dialed in, still get the issue. I have also applied every G9 Breastacular fix from the forums/dropbox location which made no difference.
Unless the vendor or somebody has any other ideas I will need to request a refund as the product is not usable:(
I'd help if I could, but I've never run into the issue you seem to be having. I can say I've had no issues outside of the whole rigidity maps blocking or reducing morphs, and keeping use of morphs to those built into the graft.
|
2 users thanked BrotherHades for this useful post.
|
|
|
|
Rank: Newbie
Joined: 7/22/2015(UTC)
Posts: 3
Thanks: 2 times
Was thanked: 1 time(s) in 1 post(s)
|
note to self: RTFM 
kcam001, BrotherHades, thanks for your replies. Turns out this was totally user error all along. Been using Daz for years, but failed to see the (now) obvious difference of the graft install vs location of the morphs. I was just dialing in the morph on the figure without the graft applied (hangs head in shame & embarrassment). At least this may get found in a search for a future person so they can head smack themselves anonymously lol Edited by user Monday, October 7, 2024 8:47:29 AM(UTC)
| Reason: Not specified
|
1 user thanked bigdsn00py69 for this useful post.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.