Description
Product: Terminus 5 Hanging Pack 2 for Poser 8+
Vendor/Creator: Davo or Davorama
Copyright (c) 2020 davo. All rights reserved. Not intended for redistribution.
-----------------------------------------------------------------------------------------------------------------------------------
Industrial Strength executions for the modern age. The Terminus 5 Hanging Packs feature new styles of hanging devices for your favorite V4 and M4 characters!
-----------------------------------------------------------------------------------------------------------------------------------
System Requirements:
- PC and Mac compatible
- Requires Poser 8+
- DazStudio version is available (sold separately) with material/surface zone adjustments and poses for the Genesis 8 figures
- All files in .obj, .cr2, .png and .jpg format.
----------------------------------------------------------------------------------------------------------------------------------
Figure Library Descriptions:
Base figures:
Controller Lever: This is stand alone Lever that can act as a control device that activates your hangers. There is a length morph on the lever and base/stand.
Controller Pulley: This is another devices that can act as a control device that activates your hangers. There is a length morph on the lever and base/stand. It can be attached to any of the hangers that have a post. There are length morphs on the base/arm and on the rod/handle.
Controller Wallmount: This is wallmounted control panel that can be attached to any wall, then you can add any hanging arm to it, for example hanger 3 Wallmount figure, Hanger 4 wallmount figure and Hanger 6 Xtra figure. There is size/shape morphs on the base and depth morph on the control panel button base.
Drain Pad: You can add this drain pad beneath your hanged victims in the event they might lose control of their bladders.
--------------
NOTE: THE HANGERS DESCRIBED BELOW ARE ALSO IN THE "ASSEMBLED HANGERS" FOLDERS AND HAVE THE EASYPOSE NOOSE-LONG ROPE FIGURE ALREADY ATTACHED TO THEM.
Hanger 3: This hanger lifts your character off the ground to be hanged. It has a size/shape morph adjustable base, post and armature. The rope connection "swing" at the end of the arm is also posable.
Hanger 3 Wallmount: This is the same as Hanger 3, but without the base/post. It can be posed right up against a wall or added to the Controller Wallmount figure for a unique configuration.
Hanger 4: A unique hanger that has a motor that turns a spindle that pulls your character off the ground instead of a drop hang. It has morph adjustable length post and motor assembly.
Hanger 4 Wallmount: Same as the Hanger 4 figure, but without the base/post. This figure can be added to the Controller Wallmount figure and placed right up against a wall.
Noose - Long Rope: This is an easypose noose with a modern black rubber look and feel. It is a thinner/smaller diameter rope and noose coil to give it a more sexy and sinister/cruel look and feel, sort of like using a wire instead of rope. This rope has easypose bending technology built into the segments so it can be easily bent and twisted to fit you characters neck or bodyparts. The base of the figure is the top coil of the noose coils "nc_seg01", this base is what is used to move the whole noose around. This segment also has an "overall length" easypose dial that will lengthen the entire length of the upper portion of the rope. The upper portion of the rope "hrseg_**" has a master easypose node every 10
segments which are shown in Poser in wireframe mode for easy recognition. The bottom or last coil segment of the noose "nc_seg13" has an "overall length" easypose dial that will control the total length of the neck portion of the rope (nr_seg**) segments. There are easypose master dials every 5 segments of
this portion of the rope which makes it easier to pose around tighter corners. Please note, there are pose files provided for the rope to work with V4 and M4 so you don't have to do a lot of work. Maybe some fine adjustments if you have a heavily morphed character.
Wall 1: This is a simple stand alone wall figure that can be used as a wall to attach the Controllers and wallmounted figures. It has width and height morphs.
-------------------------------------------------------------
-------------------------------------------------------------
Assembled Hangers Library:
---
Generic Noose with Nullbase: This is a Noose-Long Rope figure that is parented to a non-rendering taurus. This is a useful assembly if you want to attach the noose rope to some other figure that is not provided in these Terminus 5 packages. For example, a tree, beam or other fixture of your own. Pose files for V4 and M4 are provided in the pose library: Generic Noose Poses.
---
Hanger 3: This is Hanger 3 with the Noose-Long Rope figure already parented to the Hanger figure. Pose files for V4 and M4 are provided in the pose libraries.
---
Hanger 3 Wallmount: This is Hanger 3 with the Noose-Long Rope figure already parented to the Hanger figure. Pose files for V4 and M4 are provided in the pose libraries.
---
Hanger 4: This is Hanger 4 with the Noose-Long Rope figure already parented to the Hanger figure. Pose files for V4 and M4 are provided in the pose libraries.
---
Hanger 4 Wallmount: This is Hanger 4 with the Noose-Long Rope figure already parented to the Hanger figure. Pose files for V4 and M4 are provided in the pose libraries.
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
Props Libraries:
Cuffs Library:
NOTE 1: These are smart prop cuffs for V4 and M4, however, you must also use the Cuffs poses from the Pose library to position the arms/cuffs.
Cuffs 1, 2, 3 and 4: These are "behind the back" style cuffs/restraints for V4 and M4.
Cuff 5 Basic Scifi front and back: This is a combination of the Basic Scifi hand cuffs and a connector bar. There is a front and back set. The bar has some size/shape morphs to fine tune it.
To apply the cuffs, click on your character in your preview window, then click to add each cuff, they will position automatically, but you must also use the poses for the cuffs in the pose library: Cuffs.
-------------------------------
Hanging Pack Library:
This library contains neck constricting props that must be used in conjuction with the "Pose 2" poses for V4 and M4 in the hangers pose libraries.
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:
Cuffs Poses: These poses with work in conjuction with the smart prop Cuffs from the props library. There are "before and after" poses. "Before" poses should be used before your character is hanged or executed, the "After" pose should be used after. The "after" pose relaxes the shoulders and hands a bit
and work best with the "Pose 2" from the hanging sets poses.
----------------------------------------
Generic Noose Poses: These poses are to be used with the Generic Noose with Nullbase assembly in the "Assembled Hangers" figure library.
----------------------------------------
Hangers 3-4 Poses:
Note 1: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
Note 2: The V4 and M4 poses will not affect your characters shoulder, arms and hands. This will allow you to use the cuff poses without having to re-apply cuff poses each time. The pose 2 pose will
-----------------------------------------------------------------------------------------------------------------------------------
Readme File: A full readme file with more information is provided in the product zip file.
Application Compatibility
| Daz Studio | Not Supported |
| | Not Tested |
| Poser | Poser 8 |
| Other Notes |
| (Daz Studio version sold separately) |
Figure Compatibility
| Daz Figures | Generation 4 | Michael 4 |
| | | Victoria 4 |
| Other Notes |
| (G8F/ G8M supported files in Daz Studio Version) |
Product Requirements
| Other Notes |
| (V4/M4, if used, can be acquired from Daz3d) |