Description
Product: Labworks 1 ADULT EXPANSION for Daz Studio
Vendor/Creator: Davo or Davorama
store support forum: https://www.renderotica.com/community/forums.aspx?g=topics&f=2878
Copyright (c) 2023 davo. All rights reserved. Not intended for redistribution.
-----------------------------------------------------------------------------------------------------------------------------------
Labworks 1 "Adult Expansion" expands the Labworks 1 packages with this enclosed chamber full of scientific horrors.. or pleasures. Articulated scifi restraint table, benders, floor mounts, probes and more!
-----------------------------------------------------------------------------------------------------------------------------------
SPECIAL NOTE 1: Posing for G8/9 figures is based on the STANDARD, NON-MORPHED OR ALTERED figures. If you have applied morphs or altered body shapes or proportions, you must manually adjust the character and device positions if connection points are not touching. If you do have to alter the poses, you can do this to one side of the device and one side of your character then use the symmetry command to mirror the result to the other side.
-----------------------------------------------------------------------------------------------------------------------------------
System Requirements for Daz Studio:
- PC and Mac compatible
- Requires Daz Studio 4+ (created using Daz Studio 4.2)
- All files in .duf, .ds*, .png and .jpg format.
----------------------------------------------------------------------------------------------------------------------------------
Figure descriptions:
Bender: This is a floor mounted restraining device (it could also be mounted to a ceiling or wall) that locks your characters fore arms and shins together in a cuff. The posts are height adjustable.
Chamber: This is the lab chamber. It is large enough to fit all the equipment. All 4 walls have a sliding
glass shield that can move up or down. All walls, ceiling, ceiling lamp and columns can be move out of view for better camera and viewing angles. The ceiling lamp can be moved up and down to make more room for quipment.
Console: This is cool control console with ambient lit screens, a tilting glass shield and adjustable height/angle legs. A pose file for G8M/G8F is provided to pose them at the console.
Floor Mount: This is a floor mounted restrainign device (it could also be mounted to a wall or ceiling). Several pose files for G8F and G8M and matching pose files for the mounts are provided in the pose library. This figure has symmetrical mirroring so you only need to pose one half them mirror the results to the other side.
Fmachine: This is a totally cool Fuck machine with repositionable and posable control console and camera. The side arms are posable and the top and bottom middle mounts are repositionable. There is a pose file for G8Fand G8M to stand at the controls provided in the pose library. You can attach and parent the Fmachine Hose to any of the mounts.
Fmachine Assem: This is a fully poseable Fuck machine with 2 hoses already attached to the top and bottom middle mounts. There is a pose for G8F and G8M in the pose library.
Dildo Hose: This is an easypose bending dildo hose with 2 dildo heads (ribbed and smooth) at the tip. You can hide the tool head you don't want to use. Each dildo head has a half and full bend morph. The easypose bending on the figure starts are the tool head, this is to allow you to place/position the tool in/on your character, then simply pose the hose back toward the fmachine. I have found this to be an easier way to pose the equipment. The bending control nodes are displayed in poser as a wire frame.
Large Lamp: This is a large lamp that can be attache to the floor, ceiling or any wall. The light panel is ambient lit and will glow in a dimly lit room. The lamp is posable. Material pose file for either the illuminated lamp or a monitor display screen is available in the Material Options folder.
Large Monitor: Same figure as the large lamp, only this version has a display screen instead of a light panel. The screen is emmissive lit so it will glow in a dimly lit scene. It can be place anywhere.
Pod: This is a restraining/isolation pod with a posable lid. The neck, wrist, waist and ankle cuffs are posable and have symmetrical mirroring ability. The pod can be parented to the Pod Holder figure.
Pose files for G8F and G8M are provided in the pose library.
Pod Holder: This is a large mounting system for the pod (you could attach other items to the mounts if desire). The axle and armature are posable and can display the pod either standing upright or lying flat like a table.
Pod Mount Assembly: This is a pre-parented pod and holder.
Power Cell: This is a large room equipment device with 3 easypose hoses. You can pose the hoses to attach to other equipment to make them look like it's a power supply.
Table: This is a restraining table will height adjustable base shaft, angle adjustable table and posable arms and cuff restraints. Several pose files for the table and matching pose files for G8F and G8M are provided in the pose library. There is a back bending mount hidden inside the table that can be moved up or down for use.
---------------------
Probe Items folder
---------------------
Probe Base: This is a glass encased canister with a probe machine inside. At the bottom end is a focus array that can be used like a laser beam or similar device. The probe is designed to be able to allow the inside machine to be hidden from view and replace with an organic creature. The probe is also designed to all the focus array to be hidden and replaced with the Tool Arm.
There are pre-parented and assembled versions of the organic and mechanical probe already provided.
Probe Crane: This is a large ceiling mounted (though it could be floor mounted if you turn it upside down) crane with posable claw gripper at the end. The arms on the claw are posable and symmetrical mirroring. The beams between the center and end arms can be tilted.
This crane is designed to hold the probe or you can also hold another piece of equipment or even a large creature. There are pre-parented and assembled versions of the crane with the mechanical or organic probes in this package.
Probe Crane Assem (in mechanical or organic versions). Pre-assembled crane with either the mechanic or organic probe with tentacle arms or tool arms.
Probe Tentacle: This is an organic tentacle with easypose bending. It can be used as a stand alone or attached to the probe canister. The bending control nodes are displayed in poser as a wire frame.
---------------------
Tool Arm Items folder
---------------------
Tool Arm: This is an easypose bending armature with a tool mounting head. There are smart prop tool heads in the props library that can be added to the "shaft" on the tool head. The arm starts is easypose bending from the tool head, and works its way back to the end of the hose. This allows you to position the tool head on/in your character and pose the hose back to the probe or connecting equipment.
Tool Penis Pump: This is a pump device intended (but not limited to) for G8M or G8F futa. The sealing gasket at the bottom has a size morph. There are 2 testicle probes with easypose bending and a urethral probe with easypose bending. The tool has a short hose at the top that attaches to the Tool Arm. Have fun with this.
Tool Arm Camera: This is a simple camera lens that snaps onto the shaft of the tool arm head.
Tool Arm Dildo : This is mechanical dildo that snaps onto the shaft of the tool arm head. It has a half and full bend morph.
Tool Arm Syringe: This is a simple syringe that snaps onto the shaft of the tool arm head. It has a plunger morph to move the plunger up and down.
-----------
Material Options subfolder
-----------
Lamp/Monitor figures have a material pose file to switch between the emmissive lit lamp material and display screen monitor. Simply select the lamp/monitor figure and apply the option of choice.
----------------------------------------------------------------------------------------------------------------------------------
Pose Folders
SPECIAL NOTE FOR POSING: Posing for Genesis 8/9 figures is based on the STANDARD, NON-MORPHED OR ALTERED figures. If you have applied morphs or altered body shapes or proportions, you must manually adjust the character and device positions if connection points are not touching. If you do have to alter the poses, you can do this to one side of the device and one side of your character then use the symmetry command to mirror the result to the other side.
PLEASE NOTE: There is an information _Readme in the folder that has some general info about using the poses and pre-parenting requirements. There is also a link to a tutorial in this folder that has GENERIC step by step instructions on how to parent your character and apply poses to both the device and your character..
Please view the tutorial if you are novice or not familiar with progressional poses.
-----------------------------------------------------------------------------------------------------------------------------------
This package is pack 6 of several LABWORKS 1 packages which include:
Adult Expansion
Open Lab
Confined Lab
Chemistry Equipment
Small Equipment Set
Large Equipment Set
---------------------------------------------------------------------------------------------------------------------------------
Read First icons: Most folders contain a "READ FIRST" icon. By clicking this icon, an informational dialog box will pop up with pertinent information regarding the contents of the folder. Please read these notes and it is helful.
-----------------------------------------------------------------------------------------------------------------------------------
A more detailed readme file is included in in the product zip file.
Application Compatibility
| Daz Studio | Daz Studio 4.21 |
| Poser | Not Supported |
| | Not Tested |
Figure Compatibility
| Daz Figures | Genesis 8 | Genesis 8 Female |
| | | Genesis 8 Male |
Product Requirements
| Other Notes |
| (G8F and G8M base figures available at Daz3d) |
| V4 Morphs ++ | (G8F and G8M base figures available at Daz3d) |