Description
Product: Terminus 5 Hanging Pack 1 for Daz Studio
Vendor/Creator: Davo or Davorama
Daz Studio Optimization: Freeone
Questions, Comments, Suggestions or Need Help?
Copyright (c) 2020 davo. All rights reserved. Not intended for
redistribution.
-----------------------------------------------------------------------------------------------------------------------------------
Industrial Strength executions for the modern age. The Terminus 5 Hanging Packs feature new styles of hanging devices for your favorite G8F and G8M characters!
-----------------------------------------------------------------------------------------------------------------------------------
System Requirements:
- PC compatible
- Not tested in Mac
- Requires DazStudio 4.11+
- Poser 8+ Only version is available with V4 support (sold separately)
- All files in .duf, .dsf, .png and .jpg format.
- Basic G8F or G8M for poses.
----------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------
Figure Library Descriptions:
Base figures:
Controller Lever: This is stand alone Lever that can act as a control device that activates your hangers. There is a length morph on the lever and base/stand.
Controller Pulley: This is another devices that can act as a control device that activates your hangers. There is a length morph on the lever and base/stand. It can be attached to any of the hangers that have a post. There are length morphs on the base/arm and on the rod/handle.
Drain Pad: You can add this drain pad beneath your hanged victims in the event they might lose control of their bladders.
NOTE: THE HANGERS DESCRIBED BELOW ARE ALSO IN THE "ASSEMBLED HANGERS" FOLDERS AND HAVE THE EASYPOSE NOOSE-LONG ROPE FIGURE ALREADY ATTACHED TO THEM.
Hanger 1: This is a unique design hanging device, it lifts your character off the ground rather than a drop hang. It has size/shape morph adjustable parts. There is a handle you can use to activate the hanger.
Hanger 1 Xtra: This is an extra Hanger 1 swing arm if you want to add more than one person to the hanger.
Hanger 2: This is another unique hanging device that lifts your characters off the ground instead of a drop hanging. It's got 3 rope connections to handle 3 characters. It also has built in controller device with working lever, this controller can be moved around to a new position if desired. The "top" part of the figure raises and lowers, lifting the characters off the ground. There is a width morph on the "base" and "top" of the hanger so you can add more characters by adding the "Hanger 2 xtra" figure.
Hanger 2 Xtra: This is a rope connection figure that can be added to the Hanger 2 figure. Place and parent the Hanger 2 xtra figure to the "top" body part of the hanger 2 figure.
Noose - Long Rope: This is an easypose noose with a modern black rubber look and feel. It is a thinner/smaller diameter rope and noose coil to give it a more sexy and sinister/cruel look and feel, sort of like using a wire instead of rope. This rope has easypose bending technology built into the segments so it can be easily bent and twisted to fit you characters neck or bodyparts. The base of the figure is the top coil of the noose coils "nc_seg01", this base is what is used to move the whole noose around. This segment also has an "overall length" easypose dial that will lengthen the entire length of the upper portion of the rope. The upper portion of the rope "hrseg_**" has a master easypose node every 10
segments which are shown in Poser in wireframe mode for easy recognition. The bottom or last coil segment of the noose "nc_seg13" has an "overall length" easypose dial that will control the total length of the neck portion of the rope (nr_seg**) segments. There are easypose master dials every 5 segments of
this portion of the rope which makes it easier to pose around tighter corners. Please note, there are pose files provided for the rope to work with G8F/G8M so you don't have to do a lot of work. Maybe some fine adjustments if you have a heavily morphed character.
Wall 1: This is a simple stand alone wall figure that can be used as a wall to attach the Controllers and wallmounted figures. It has width and height morphs. This will work well with the Hanger 7 figure.
-------------------------------------------------------------
-------------------------------------------------------------
Assembled Hangers Library:
Generic Noose with Nullbase: This is a Noose-Long Rope figure that is parented to a non-rendering taurus. This is a useful assembly if you want to attach the noose rope to some other figure that is not provided in these Terminus 5 packages. For example, a tree, beam or other fixture of your own. Pose files for V4 and M4 are provided in the pose library: Generic Noose Poses.
Hanger 1: This is Hanger 1 with the Noose-Long Rope figure already parented to the Hanger figure. Parent yourG8F/G8M character to the "swing" body part of the hanger before applying any poses. Pose files for G8F/G8M are provided in the pose libraries.
subfolder Hanger 1 Xtra: This is Hanger 1 xtra with the Noose-Long Rope figure already parented to the Hanger figure. Parent your G8F/G8M character to the "swing" body part of the hanger 1 xtra before applying any poses. Pose files for G8F/G8M are provided in the pose libraries.
---
Hanger 2: This is Hanger 2 with the Noose-Long Rope figures already parented to the Hanger figure. Pose files for G8F/G8M are provided in the pose libraries.
subfolder Hanger 2 Xtra: This is Hanger 2 xtra with the Noose-Long Rope figure already parented to the Hanger figure. Pose files for G8F/G8M are provided in the pose libraries.
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
Props Libraries:
Cuffs Library:
NOTE 1: These are smart prop cuffs for V4 and M4, however, you must also use the Cuffs poses from the Pose library to position the arms/cuffs.
NOTE 2: The "after" poses work best with the "Pose 2" poses from the hanger sets posing
Cuffs 1, 2, 3 and 4: These are "behind the back" style cuffs/restraints for G8F/G8M
Cuff 5 Basic Scifi front and back: This is a combination of the Basic Scifi hand cuffs and a connector bar. There is a front and back set. You must use the bar as well as the Hand LT and Hand RT cuffs provided. The bar has some size/shape morphs to fine tune it.
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:
Cuffs Poses: These poses with work in conjuction with the smart prop Cuffs from the props library. There are "before and after" poses. "Before" poses should be used before your character is hanged or executed, the "After" pose should be used after. The "after" pose relaxes the shoulders and hands a bit
and work best with the "Pose 2" from the hanging sets poses.
----------------------------------------
Generic Noose Poses: These poses are to be used with the Generic Noose with Nullbase assembly in the "Assembled Hangers" figure library.
----------------------------------------
Hangers 1-2 Poses:
Note 1: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
-----------------------------------------------------------------------------------------------------------------------------------
Readme file: A more detailed readme file is provided in the product zip file.
Application Compatibility
| Daz Studio | Daz Studio 4.10 |
| Poser | Not Supported |
| | Not Tested |
| Other Notes |
| (Poser only version sold separately) |
Figure Compatibility
| Daz Figures | Genesis 8 | Genesis 8 Female |
| | | Genesis 8 Male |
| Other Notes |
| (G8F/ G8M supported files in Daz Studio Version) |
Product Requirements
| Other Notes |
| (Genesis figures, if used, can be acquired from Daz3d) |