Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
I found this odd problem when using the Genesis 8 female Transgender or Crossfigure female to male
It never happened on the first version and seems to get worse with each update, so any ideas as to how it can be fixed?
Pose is is set using flacid and gens smaller
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
I guess that xxy is generating a morph based on the one you used on genesis. You can try to find the same named morph on XXY and set it to 0.
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
I've searched through all the hidden morphs and guess the hang is down to the scale down of genitals in combination with the original problem, this was never a problem with version 1, neither was using crossfigure or transgender until the new updates. Those indents above are what is happening every time now and on the latest version it is even worse.
There was a problem earlier with the weight morph, which kind of did the same, but that took a year to be fixed. It could be that this graft part of the item is too low on geometry as looking at it in hexagon and pulling out these indents just stretches the graft more.
I could pull it into blender and subdivision it, but it would change the whole product and Daz would not recognise it.
A shame this is a good product otherwise.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
Are you talking about clones or some Daz product when you say crossfigure and transgender? I can make a custom morph if it is a custom FBM I just need to get the product in question myself.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
Is this "Transgender Shapes for Genesis 8" the one that you are trying to use?
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
Originally Posted by: dbxxx  Is this "Transgender Shapes for Genesis 8" the one that you are trying to use?
Crossfigure and Transgender morphs for GF8
https://www.daz3d.com/genesis-8-cross-figure-resource-kit Edited by user Monday, April 3, 2023 4:05:19 PM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
OK, I'll have a look at it and update.
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
Thanks very much appreciated.
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
Any news on the update????
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
Too much work so I haven't got to it yet. I will by that product and do it as soon as I get the chance.
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
It happens on a normal GF8 too, this time the opposite, this time the graft goes outward instead of inward. It never happened before until this last update and considering it is actually made for GF8 it really needs fixing so it can be used. Been waiting nearly 3 months for this to be fixed now?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
Well I did get that Daz product you wanted me to make a "trans" morph for and it's not what you said it is.
XXY is for G8F but it isn't for G8M which is what you want me to make.
The problem is that it is a lot more complicated then a piece of clothing and just making it fit G8M is not enough.
There are a ton of JCM-s and added custom JCM-s that don't work then.
It is a lot of work making it compatible with G8M and that is not something I can do right now. XXY was never meant to support G8M.
Apart from that please provide more info on how it happens on G8F? You gave no info on that.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 2/14/2016(UTC)
Posts: 595
Thanks: 29 times
Was thanked: 299 time(s) in 238 post(s)
|
Check to see if your G8 genepool is corrupted. If you have a character that is set to load automatically, then it will mess with other items and some characters are so subtle on the changes that it might not be apparent to look at G8F but can mess up other things if the preset involves scaling or settings that tend not to play well with grafts. Load G8F and before you do anything look under used morphs if there is anything other than default female shape or something like that then you likely have a character being loaded as active (all it takes is a 1 in a couple lines of the script)
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
Here is the problem now with a normal GF8, this was also okay before the updated version, so the problem does not ly with GM8 or Crossfigure, as I said before this problem never appeared until the update, which made the original one become a grey box, because the geometry is now gone.
Is there anyway I can reload the original? scapegoat attached the following image(s):
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
That does look like what BrotherHades said. Have you tried looking for enabled morphs?
Do you have old zip archive? If not you can contact me via email and I can send old files to you.
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
I can see some "vagina" morphs on 100% on your screenshot. Maybe try setting those to 0%.
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
Thanks for this help, very apprieciated.
I had all the morphs at 0 and even had the dbxx.ctr morph on 0
What version number is the previous one as this is what is in my download page here db-xxx-XY-1-51
What folders would I need to delete to start again ?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
That depends on how you installed it. Basically you need to delete the same files that are in the archive from your "My Daz3d library".
I suppose you meant XXY-1-5-1?If so that is the one before the latest. You can try deleting that one and downloading the XXY 1.52.
If 1.51 is the latest for you than you are looking at XY not XXY.
|
|
|
|
|
|
Rank: Member
Joined: 7/25/2016(UTC)
Posts: 24
|
Sorry I had another look at GF8, the indent appears with every character dial, the dbxxx.ctrl also makes a normal GF8 have the indents and reducing it smoothes it out. I looked through my download pages and only have 1.51 there, is there a 1.52, because it is not there. Is XY not GM8?
|
|
|
|
|
|
Rank: Advanced Member
Joined: 5/31/2017(UTC)
Posts: 219
Thanks: 22 times
Was thanked: 49 time(s) in 37 post(s)
|
XY is for G8M and it's latest version is 1.51. XXY is 1.52 latest. I'll take a look at ctrl morph.
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.