|
Rank: Newbie
Joined: 10/27/2017(UTC) Posts: 3
Thanks: 2 times
|
I apologize in advance but I looked around and all I find are comments on Futulicious, I didn't see anything for the Genitalia (Genesis 8).
I have installed it in the exact way it tells me to install in the read me[1] and in the PDF [2], and I find it in the My Library section. The problem is its a block when I load the genitalia (custom model or generic genesis 8 female), and it tells me it cant find "data/meipex/goldenpalace/goldenpalace_genitalia/goldenpalace_2254.dsf"
I have read the included tutorial and I just can't see what I am doing wrong. Any help is appreciated, thank you.
[1] - C:\Users\YOUR NAME\Documents\DAZ 3D\Studio\My Library\
[2] - C:\Users\Public\Documents\My DAZ 3D Library
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 207
Thanks: 2 times Was thanked: 66 time(s) in 55 post(s)
|
You should only install GP to ONE directory, the same one as your G8F is installed to. The directories listed in the readme and PDF are examples of typical installation locations, but won't necessarily be the same as your personal installation directory.
|
1 user thanked nightwolf1982 for this useful post.
|
|
|
Rank: Newbie
Joined: 10/27/2017(UTC) Posts: 3
Thanks: 2 times
|
I installed it into the same directory [1] and it's still showing as a block, with the same error. I even tried putting it in the actual G8F directory, and it still couldn't 'find' the file. Thank you but it looks like this isn't gonna happen, I'll have to find something else. Thank you again
[1] - C:\Users\Public\Documents\My DAZ 3D Library\People (all my genesis figures are in that directory)
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 1,745
Thanks: 905 times Was thanked: 1233 time(s) in 614 post(s)
|
If the gens are showing as a blocks, it means that the \data folder of the zip isn't merged with the \data folder of your daz library (probably the Runtime folder isn't installed where it should be as well). The 'data/meipex/goldenpalace/goldenpalace_genitalia/goldenpalace_2254.dsf' is where the info about the geometry is and if it isn't located in the exact folder (data/meipex/goldenpalace/goldenpalace_genitalia) where it should be, you get the blocks. Try to open side by side the .zip folder and your My Library one. Drag and drop the data and runtime folders from the zip to the MyLibrary folder general area (be careful not to drag the zip data folder in the My Library data one... otherwise it'll go in a sub-folder. Remember, you need to merge the folders, if something goes into a subfolder, the path will be broken, and the needed files won't be found.
|
1 user thanked Meipe for this useful post.
|
|
|
Rank: Newbie
Joined: 10/27/2017(UTC) Posts: 3
Thanks: 2 times
|
Thank you that worked perfectly! I appreciate the help and love the product!
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 1,745
Thanks: 905 times Was thanked: 1233 time(s) in 614 post(s)
|
|
1 user thanked Meipe for this useful post.
|
|
|
Rank: Newbie
Joined: 1/14/2018(UTC) Posts: 7
Thanks: 5 times Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: Meipe If the gens are showing as a blocks, it means that the \data folder of the zip isn't merged with the \data folder of your daz library (probably the Runtime folder isn't installed where it should be as well). The 'data/meipex/goldenpalace/goldenpalace_genitalia/goldenpalace_2254.dsf' is where the info about the geometry is and if it isn't located in the exact folder (data/meipex/goldenpalace/goldenpalace_genitalia) where it should be, you get the blocks.
Ok, sorry, haha, but I'm at a loss here. I'm sure I'm just stupid but I've double checked to make sure that :
A) The GP folder was placed in the exact location specified by the READ ME instructions for GP (Extract the contents of the .zip file into your main DAZ folder. It will be something like C:\Users\YOUR NAME\Documents\DAZ 3D\Studio\My Library\) and
B) The paths I quoted you on above were intact. They are. Here's a screen shot from my system:
And yet, the GP still displays as a box. Why?
You then provided a solution, but again, I'm lost (no doubt, again, to stupidity).
Originally Posted by: Meipe Try to open side by side the .zip folder and your My Library one. Drag and drop the data and runtime folders from the zip to the MyLibrary folder general area (be careful not to drag the zip data folder in the My Library data one... otherwise it'll go in a sub-folder. Remember, you need to merge the folders, if something goes into a subfolder, the path will be broken, and the needed files won't be found.
Maybe you could rephrase this bit for us stupid people? ;) I'm a bit lost when you say I should drag the data folder from the zip folder into the MyLibrary folder "general area." AT this point, all that's located in the MyLibrary folder is the unzipped GP folder I put there according to the READ ME install instructions. It seems here you're saying that path should be MyLibrary/data....
Anyway, thanks in advance for any help, and again, please excuse my stupidity
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 1,745
Thanks: 905 times Was thanked: 1233 time(s) in 614 post(s)
|
Don't worry, it's an easy fix. See pics attached for more clarity... Meipe attached the following image(s):
|
1 user thanked Meipe for this useful post.
|
|
|
Rank: Newbie
Joined: 1/14/2018(UTC) Posts: 7
Thanks: 5 times Was thanked: 1 time(s) in 1 post(s)
|
That did the trick. A picture is worth a thousand words, etc..... :)
Thank you very much!! Oh, and the GP looks wonderful, btw!
So just one more question, when you get a chance. The GP looks fantastic on the standard G3 female; however, when I try to use it on a model made for G3, (in this case Mallorie for G3), the GP doesn't work very well. Here's a screen shot of what I'm getting:
Any suggestions on how to fix this?
Thanks again, Meipe!
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 837
Thanks: 275 times Was thanked: 312 time(s) in 211 post(s)
|
Originally Posted by: Jerrai
That did the trick. A picture is worth a thousand words, etc..... :)
Thank you very much!! Oh, and the GP looks wonderful, btw!
So just one more question, when you get a chance. The GP looks fantastic on the standard G3 female; however, when I try to use it on a model made for G3, (in this case Mallorie for G3), the GP doesn't work very well. Here's a screen shot of what I'm getting:
Any suggestions on how to fix this?
Thanks again, Meipe!
What UV set are you using on the character? Some of the DAZ character sets use very different UV's that can cause the crotch to get weird.
|
1 user thanked matt for this useful post.
|
|
|
Rank: Newbie
Joined: 1/14/2018(UTC) Posts: 7
Thanks: 5 times Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: matt
What UV set are you using on the character? Some of the DAZ character sets use very different UV's that can cause the crotch to get weird.
Thanks for the response! :)
I tried both the UV sttings that came with GP (G3 and Victoria IIRC), and neither did anything to change that.
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 837
Thanks: 275 times Was thanked: 312 time(s) in 211 post(s)
|
Originally Posted by: Jerrai
Originally Posted by: matt
What UV set are you using on the character? Some of the DAZ character sets use very different UV's that can cause the crotch to get weird.
Thanks for the response! :)
I tried both the UV sttings that came with GP (G3 and Victoria IIRC), and neither did anything to change that.
Hmmm. Try loading your character without any gens, load the base G3F materials, and then load the Golden Palace. If that doesn't fix it, I'll leave it to Meipe. :)
|
2 users thanked matt for this useful post.
|
|
|
Rank: Newbie
Joined: 1/14/2018(UTC) Posts: 7
Thanks: 5 times Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: matt Hmmm. Try loading your character without any gens, load the base G3F materials, and then load the Golden Palace. If that doesn't fix it, I'll leave it to Meipe. :)
That seemed to do the trick on two of the models. Thanks so much Matt!!
I am getting weird error messages on another G3 model, where I can't apply the script. It's a selection error that says "Select G3 model and try again." The problem is, the model IS selected. It seems the GP works better on some models than others?
Any way, thank you for the aid so far. :D
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 837
Thanks: 275 times Was thanked: 312 time(s) in 211 post(s)
|
Originally Posted by: Jerrai
Originally Posted by: matt Hmmm. Try loading your character without any gens, load the base G3F materials, and then load the Golden Palace. If that doesn't fix it, I'll leave it to Meipe. :)
That seemed to do the trick on two of the models. Thanks so much Matt!!
I am getting weird error messages on another G3 model, where I can't apply the script. It's a selection error that says "Select G3 model and try again." The problem is, the model IS selected. It seems the GP works better on some models than others?
Any way, thank you for the aid so far. :D
I've never had a problem loading it on any figure, so I'm not sure what to think. If it's based on G3F, it should load with no problem....
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 1,745
Thanks: 905 times Was thanked: 1233 time(s) in 614 post(s)
|
Originally Posted by: Jerrai
I am getting weird error messages on another G3 model, where I can't apply the script. It's a selection error that says "Select G3 model and try again." The problem is, the model IS selected. It seems the GP works better on some models than others?
Maybe you are using a custom character whose name was edited, so the the script don't recognize it. Try to use a default G3F, load the character textures on it and dial the shape you need in the shaping tab.
|
|
|
|
Rank: Newbie
Joined: 5/18/2018(UTC) Posts: 2
|
I know, Im stupid but what is wrong? Elladdan attached the following image(s):
|
|
|
|
Rank: Member
Joined: 12/16/2015(UTC) Posts: 24
Was thanked: 8 time(s) in 6 post(s)
|
Originally Posted by: Elladdan
I know, Im stupid but what is wrong?
You are in the wrong folder, take a better look at the description. You need "default" in the "GoldenPalace_Genitalia" folder, not "G3F_GoldenPalace_Genitalia"
|
|
|
|
Rank: Newbie
Joined: 5/18/2018(UTC) Posts: 2
|
Originally Posted by: surody
Originally Posted by: Elladdan
I know, Im stupid but what is wrong?
You are in the wrong folder, take a better look at the description. You need "default" in the "GoldenPalace_Genitalia" folder, not "G3F_GoldenPalace_Genitalia"
Ok... but... this is direct drag and past from zip file :)
|
|
|
|
Rank: Advanced Member
Joined: 9/15/2012(UTC) Posts: 1,745
Thanks: 905 times Was thanked: 1233 time(s) in 614 post(s)
|
Sorry for the late reply, I was super-busy... ;) I guess you purchased by mistake the Golden Palace for G3F 'update' instead of the full version... The missing file is included in Golden Palace fof G8F. In case you aren't interested by GP for G8F, you may mail to to store manager, and ask how to get the full version: http://www.renderotica.c...ace-For-Genesis-3-Femaleinstead of: http://www.renderotica.c...s-3-Female-GP-G8F-Update
|
|
|
|
Rank: Member
Joined: 5/12/2016(UTC) Posts: 27
|
Can the GP shell color "that darkish pink" be edited to a different color without the other parts affected? If so how? Thanks
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
|