Davo's Madlab 5: Zero-G Core Pack
davo_ml5_popup01-(1).jpg davo_ml5_popup02-(1).jpg davo_ml5_popup03-(1).jpg davo_ml5_popup04-(1).jpg davo_ml5_popup05-(1).jpg davo_ml5_popup06-(1).jpg davo_ml5_popup07-(1).jpg davo_ml5_popup08-(1).jpg davo_ml5_popup09-(1).jpg davo_ml5_popup10-(1).jpg davo_ml5_popup11-(1).jpg davo_ml5_popup12-(1).jpg

Description

Requirements:

- PC and Mac compatible
- Poser 5+ rigged and tested
- Poser 7+ required for master parameter pose dial on 2 of the figures (manual posing is also able)
- Not tested in DazStudio but should work with minor texture and location adjustments for reflection mapping and bump/displacement mapping
- Some pre-parented items may not translate well into Daz Studio, however you can assemble the parts to create your own setup.
- .Obj, .cr2, .pz2, pp2, .png, .jpg formatted files
- Does not require any other purchases

Features:
- Chamber: This is a tall circular room with 4 walls, ceiling and floor.  There are columns between the walls.  The columns have 4 morphs to move each column out of view for better camera views.   The walls can move up and down and out of view.
- Chamber Wall 1: This is an add-on wall for the chamber.  It features an iris door and circular corridor behind the iris door.  The corridor has top, bottom and right/left walls that can be moved out of the way for better views.  The iris door has a master pose dial to open all the iris segments at once.
- Chamber Wall 2: This is an add-on wall with a viewing window and corridor behind the window.  Each end of the corridor has a posable door.  All the walls, ceiling, floor and doors can be moved out of view for good camera angles.
- Chamber Assem 1: This is a pre-assembled chamber with the addition of  (1) Chamber Wall 1, an extra corridor section and extra iris door.
- Chamber Assem 2: This is a pre-assembled chamber with the addition of (4) Chamber Wall 2 figures.  The unused doors of the Wall 2 figures have been dropped down out of view.
- Chamber Assem 3: This is a pre-assembled chamber with the addition of (1) Chamber Wall 1 figure, extra corridor, extra iris door and (3) Chamber Wall 2 figures.
- Computer Station: This is large computer panel that you can add to the walls of the chamber or place anywhere.
- Console Station: This is a 1/4 circle computer control console with re-positionable consoles and posable parts.
- Core:  The Core is a floor to ceiling structure with a re-positionable glass shield in the  center.  The glass shield can be moved out of view.  There are three additional figures that can be combined with the Core.
- Core Cuffs:  These are posable arm and leg cuffs with tentacle style armatures
- Core Restraints:  This is a figure that can be added to the Core or used as a stand alone.  The arm and leg cuffs/cuff bases are re-positionable.Pose files for M4 and V4 are provided for the cuffs and M4/V4.  This figure can be combined with the core or used as a stand alone.
- Core Sphere:  This is a power cell with ambient glow sphere in the center.  This can be added to the Core figure.
- Drone 1:  This is a posable drone/robot that can fly around the scene.  The eye is posable as well as the 4 thrusters.  You can add one of the tentacle tool arm to this figure.
 - Gyro:  This is a gyroscope style restraint machine.  It is fully posable and has adjustment morphs on the stems of the cuffs.  Pose files for V4 and M4 are provided in the pose library.
- Hover Table (m4 and v4 version):  This is a fully articulated restraint table with a hover jet on the back. Pose files for M4 and V4 provided.
- Ladder: This is a simple 2 part ladder figure that you can add to any wall.  This is useful for characters to use for stabilization in Zero-G environment.
- Light Ring: This is a posable ring of lights and monitors you can add to your scene.  The small antennas on the ends of the light banks are re-positionable.
- Tool Tenta Arm:  This is a posable tool armature with easypose bending technology.
- Tenta-Inject:  This is a syringe style tool for injecting fluid into your characters. The vial can be repositioned.
- Tenta-Probe: This is a probe/laser tool tip.  There is a small laser tip hidden just inside the tip of the probe that has a beam length morph.
- Tenta-Saw:  This is a posable cutting saw tool tip.
- Tenta-Suction: This tool tip can be used as a milking device for breasts or as an umbillical cord type device, or a can be used to attach to the body or other figure.
- Tenta-Tongs:  This is a tweezers/pincher type of device.  The tong tips can be hidden to just have sharp metal tweezer tips.  Each arm is posable.
- Tenta-* : This is a posable tentacle tool arm with the tools pre-parented to the tips.
- Tool Holder:  This is a floating tool holder that can be used to attach the Tool Tentacles to (a pre-parented version is provided).  There is a floating stem to move the figure around, remember, this is zero gravity.  Inside the tool holder housing is a hidden lazer tip assembly.  There is a pose file in the pose library to reveal the laser tip.  Inside the tip of the laser is a morph adjustable beam.  There is a pose file to hide and show the laser tip as well as a pose to hide the stem of the tool holder if you don't want to see it.
- Xtra Corridor: This is an extra circular corridor section with movable walls and ceiling.  You can add these together and place them behind Chamber Wall 1 door.
- Xtra iris Door: This is an extra iris door with posable door segments.  If you are using Poser 7 or higher, there is a master parameter pose dial that will open all the door segments at once.
Pre-Assemblies:  There are some pre-assembled figures such as a console station ring  attached to a null base (to move all the consoles together), a pre-assembled tool holder and pre-assembled Core features.

Props:
Smart prop back mounted mini propulsion jet pack for V4 and M4.

Pose files:
Pose files for all equipment and matching pose files for M4 and V4 are provided.

-Detailed Readme File.
   







Downloads

 
 

Davo's Madlab 5: Zero-G Core Pack

SKU: SKU30724
By: Davo

Next in line of the Madlab product line from is the Madlab 5: Zero-G Core Package. This unique lab room and equipment can be used to simulate a zero gravity environment.

$21.99



 
Available in the following bundles:
Zero-G Bundle
Bundled price: $19.79
Save 10%

Others Also Purchased

Inspiration Poses: Cowgirl Vol 3!
$8.99
25% off
 
Double Dippin
$7.50
50% off
 
Bound Poses 5 Genesis 9
$2.50
50% off
 
Bound Poses 3 Genesis 9
$2.50
50% off
 
Bound Poses 2 Genesis 9
$2.50
50% off
 
B-tacular For Genesis 9
$15.90
 
Sex Kitten
$7.50
50% off
 
Davo's Madlab 5: Zero-G Adult Expansion 2
$14.99
 
Davo's Madlab 5: Zero-G Adult Expansion Pack
$12.99
 
Zero-G Bundle
$44.97
save 10%
 

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.