Thank you for puchasing The Pulp Noir interior setting "Qonset Hut" Core Pack from Davo ------------------------------------------------------------------------------------------------------------------ To install, open the zip file and extract the contents (make sure "use folders" option is checked) to the location of your poser.exe file. For example: c:/program files/curious labs/poser 5 Do not include "runtime" in the extraction path, it is already specified in the zip file. The files will be extracted to: Figures/Characters library: Pulp Noir / Quonset Hut / The hut (building, shelfs, AC unit, lamps, vents and extra walls) Pulp Noir / Quonset Hut / Equipment (Trolley stuff, push cart, hose, propane stuff, concrete pit, foam box) --------------------------- Props library: Pulp Noir / Quonset Hut / (old metal textured wrist, ankle and neck cuffs for M3, V3, M4 and V4) --------------------------- Figure Pose files library: Pulp Noir / Quonset Hut / Equipment Poses (Poses for push cart, concrete pit and foam box for V4) ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ The Quonset Hut "CORE PACK" is comprised of: Hut Assem (shadow and no shadow versions): This the hut which has front wall with posable door and light switches, back wall, front mid and back floor sections, each having a right and left wall. There is a pre-parented ceiling vent and ceiling lamps parented to each section. The mid floor is the base part of the overall figure, the front and back floors can be moved forward and back to allow additional wall segments to be added. The No Shadow version has shadow casting ability turned off on all the elements of the hut, this allows light to pass through the walls without causing dark shadows. This is an advantage for those users who do not have lighting experience. Ceiling AC Unit: This is an old air conditioning unit that can be stuck onto any wall. Half should stick inside the building, half outside. Ceiling Lamps: This is a shop lamp style lamp. There is a non-rendering sphere between the lamps which you use to move them around. The length of the wiring can be adjusted, the width between the lamps can be adjusted. You should parent them to the "seam" Ceiling Vent: This is an overhead vent that is the length of the floor segments, add them as needed. You should parent them to the "seam" Interior wall: This is an interior partition wall with posable door and light switches. You should place this centered on the metal girder separating the wall segments. Shelf (large and small): storage shelfs, add as many as you like. Wall Segments: This is a floor, seam and left/right wall segment that you can add to make your hut longer. Move the front or back floor segments of the hut to insert new segments. There is a window version and non window version. --------------------------- Equipment: Concrete Pit: This is a large conrete slab with metal grate door. There is a water plane you can move up and down to submerge your victims. The slab can be tilted on it's end to stand up and down and used as a vertical cell. Pose file for V4 is included in the pose library. Foam Box: This is a wooden box with movable top, bottom and side walls. There are several foam sections with a cutout profile of v4 laying on her side. You can move the foam segments around. There is a pose file for V4 in the pose library. "Restoring" the box will close the lid and put all the foam parts where they belong. It's default insertion has the lid askew out of the way. Hand Truck: Simple hand truck with turning wheels. Hose Bib: This is a posable hose bib that sticks out of the floor. The hose has easypose bending technology. This is a good figure to use with the Concrete Pit and water tank from the Torture Devices Pack. Propane Tank: Has posable knob and easypose hose. Hose and control nodes which display in poser as a wire frame, this is for easy recognition. Propane Heater: this is a simple heater. It's hose connection can be moved around for ease. You can use it with the propane tank. This figure has some ray-trace reflection mapping built into some of the material zones, you will need to enable ray-tracing in render settings to use them. It will not effect the performance or looks much if you don't use ray-tracing. Push Cart: Simple cart with 4 eye hooks to use with the smart prop cuffs. Pose file for cart and v4 in the pose library. Trolley Controller: Hand held controller with easypose cord. The cord's posing starts at the controller and runs to the end of the cord. You can parent this to the "arm" of the trolley if desired. Trolley: This is a trolley/hoist lift figure. The top beam is the base for overall movement. The trolley hoist moves back and forth. There is a multi segment chain attached to the trolley. You can move the chain up and down and hide the segments you don't use. You can attach the trolley controller (seperate figure) to the arm of the trolley. The front and back legs of the trolley can move back and forth, the leg bases can move up and down if you want to make the trolley shorter. --------------------------- Props There are smart prop neck, wrist and ankle cuffs in the props folder. Use these in conjunction with the Push cart. ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ Please enjoy and have fun with this product. Any questions, email me at [email removed] Cheers, Davo / davorama