..........................................................................
HOFsTwo - Couch Poses for GF8 / GF8.1
..........................................................................

"Preset Exceeds Limits" dialog

If a "Preset Exceeds Limits" dialog box appears, please select "Turn Limits Off". If the assigned pose does not 
match the icon, you have either selected "Leave Limits On" or saved this option as a personal preset. In this 
case you should delete your preset, because otherwise you can only use simple / boring commonplace poses.

..........................................................................

Model cuts through / hovers above the couch

All poses were accurately developed for the GF8 base model and tested several times with this model. As long as 
your favorite model has been developed proportionally to the GF8 base, you will have no difficulties. 

Unfortunately this does not apply to all models / characters.

If your model cuts through / hovers above the couch, you have two simple options to eliminate the worst mistakes:

A) via the "Shaping" pane:
Once you have selected your model in the "Scene" pane, switch to "Shaping" pane and reduce the body influence of 
your model or switch it off. Example: if your model has the name "Taye", you will find the option under "Taye Body" 
with the default value "100". 

Check in the viewport what happens if you reduce this value. Sometimes you do not need to set the value to "0" 
to eliminate the worst errors.

B) via the "Posing" pane:
With your model selected in the "Scene" pane, switch to "Posing" pane and use General -> Transforms -> Scale. 

If your model is smaller than the GF8 base, you can scale it to 100%. The best way to do this is to click on 
the existing Value and enter "100".

If your model is larger, the scale value will not be displayed. Reduce the scale value while checking the 
effect in the Viewport until you are satisfied with the result.

You can also combine both methods. Just try it out until you are satisfied with the result.

..........................................................................

Moving model and couch

You can create a "Group" from your model and the couch. Select the model and the couch in the "Scene" pane and 
use "Main menu -> Create -> New Group ..." to create a group. If you wish, you can give your group a suitable name.

Now you can position your model and the couch as a unit by rotating and moving the group.