Thank you for purchasing the TERMINUS-3 TOTAL/CORE PACKAGE from Renderotica.com

Use as program that can extract contents from a zip file.  Use the "use folders" option to extract
them to the correct path.  Your path should be the location of your runtime folder, but do not include
runtime in the path.  For example, your path could be:

C:\Program Files\Curious Labs\Poser 5

After installation, Terminus-3 products will be placed in the following folders:

Character - Figures Libraries:

TERMINUS-3 / Body Benders
TERMINUS-3 / Core Elements
TERMINUS-3 / The Building
TERMINUS-3 / The Carrousel

Pose Library:

TERMINUS-3 / Body Benders
TERMINUS-3 / The Carrousel
TERMINUS-3 / Core Elements

SPECIAL NOTE: Terminus-3 is designed and built around Vicky 4. The Body Benders elements and some other
parts of the packages are special fit to the standard, non-morphed Vicky 4 character sold by Daz3d.com. This
does not mean the package will not work with other character figures, you can probably adjust the posing and
positioning of the elements to suit your needs. However, be aware that this package is designed around V4 and
only V4 poses are supplied. No other figures have been tested or supported for this package.

TERMINUS-3 is the third installment of my popular Terminus products sold at renderotica.com.  The Terminus products
are intended to be the "end of the line" for prisoners and victims.  You can use the Terminus products for torture, pleasure,
executions or whatever you wish to inflict upon your intended victims.  This version of Terminus is a near future modernistic
style.

The TERMINUS-3 TOTAL/CORE package is comprised of 3 products:
TERMINUS-3 total/core pack (the building and core elements) in addition to
TERMINUS-3 "Body Benders Pack"
TERMINUS-3 "The Carrousel Pack"

This readme will describe all elements of each package.

Figure Libraries of the Core Pack:

THE BUILDING
(This is an interior room setting assembly). The building can be used as a settings place to
carry out your torments. It floor and ceilings do not cast shadows, this will allow for easy light setups. Only
the walls cast shadows.

Blade Bottom and Blade Top: These are a set of security blades that can attached to walls to add a menacing
and dangerous look to the room.  There are already top and bottom blades as part of the side walls, these
additional blades can be added to the end walls and other models if you wish.
 
Side Wall: The side wall is a cross section of half the room, it has a floor, wall and ceiling. The wall has 2 blades
attached that can be hidden. The ceiling has a lamp that can be moved out of the way. All elements can be
turned off or moved out of the way for better views and camera shots.

Section: This is (2) side wall elements parented to a null figure (small diamond shaped figure just beneath the floor)
Move the null figure to drag the 2 side walls to a desired location.  You can add as many sections together side
by side to create a very long room. Parent the null figure of the sections to an overall null base.
 
Building Full Assem: This is a set of several sections (with their null figures) all parented to a larger null figure
just beneath the floor in the center of the scene. The overall null figure is a different color. Move it around to
move the entire building set. There is also 2 end walls attached to the null figure.

End Wall: This is an end wall with a posable door and top/bottom blades parented to the wall.  Place this at the
end of your cross sections.

Null Base: This is a large diamond shaped figure that you can parent other elements to if you want to move an
entire scene around easily.  Place the null base figure in your scene first (so it will be at the top of the list in
the heirarchy editor), then as you add other elements to the scene, parent them to the null base. Be sure once
everything is parented and positioned, use the figure/memorize/everything command to memorize the location
of all the elements.

CORE ELEMENTS:
Core elements are a collection of figures and elements that can be used to torment your characters.

Back Binder: This is a fully articulated and posable behind the back arm restrainer. It has symmetrical posing
ability, just pose one side of the figure and mirror it to the other side. The rings can be moved around and adjusted.
 
Chopper Bucket: A yellow bucket with some grungy textures and blood spatters. Use this collect body parts or other
things. The wheels are posable.
 
Chopper Post: This is an adjustable height post with a collar to attach the chopper to.  You can attach anything else to
it that you'd like.
 
Chopper: This is a beheading/decapitating device with posable blade and 2 posable stocks.  A slide on the lower stock
can be hidden or adjusted for angle and position.

Chopper Combo Set: This is a post, chopper and bucket all parented to the post.
 
Floor Mat round and square: 2 floor mats are provided with some grungy textures and blood spatter. Use these in
messy areas for an interesting look.
 
Gallow Pole: An adjustable height armature for attaching the Hanging Machine to. The tower sections can move up
and down. This figure is pre-parented to a hang gallow assembly.
 
Hang Machine: This is a motorized modern looking hanging apparatus that is intended to feed noose rope in and
out.  Attach the Hang noose and rope to the Machine.  There is a pre-assembled Hang Gallow with these already
set up.
 
Hang Machine Full: Noose Rope and hang machine pre-parented. Place the machine anywhere.

Hang Noose and Rope. This is an easypose rope with an easypose noose and neck rope parented to it. The noose
and neck rope have easypose bending built into them.  A pre-hanging and after-hanging pose is supplied for the noose
and a V4 character so that setup will be faster.
 
Hanging Platform: This is a platform from which you would hang your victims. The rear platform lifts up and down, the
standing/front platform moves up and down as well. There is a small trap floor in the front that folds down, releasing your
victim to be hanged. There are hinge rods under the trap floor that retract to allow the trap floor to fall.
 
Hang Gallow Assem: This is a pre-parented/assembled hanging platform, Gallow Pole, Hanging machine and noose
rope/neck rope all pre-parented together.

Hanging notes: It is recommended in order to set up a scene, that you place the Hang Gallow Assembly in a room.
Then you add your V4 character. Then you will attach any body bender restrainers or back binder to your V4 Character
and use the supplied pose files in the TERMINUS-3/Body Benders or Core Elements pose library to pose your V4
character for the bender/binder. Parent the bender/binder to you V4 character.  Then, from the Core Elements pose library,
apply the  V4 PreHang pose. This will position the V4 character onto the platform and adjust her neck. Apply the Noose Pre-Hang
pose to the noose, this will form the noose around the V4 characters neck.
Now you can apply the V4 Hanging pose (this will pull the neck taught) and apply the Noose Hanging pose to the noose (this
will pull the noose tight).  Minor adjustments can be made depending on your V4 Character.
The noose Slack pose will make the noose look like it's unused.

Gasser Large: A domed chamber that has a pole hole in the center (can be used in conjuction with body bender 8). The dome
can move up and down, the gas canister can be hidden. The intention is to use this figure to gas your victim.
 
Gasser Small: A small domed chamber that can fit v4 and the body bender 8.  Dome can move up and down. Can be 
used as a gas chamber or restraining tube.
 
Grinder: Grind up and recycle your victims with the grinder. It's got  2 spinning blade arms and posable lid/cover.
 
Head Hole: This is a concrete slab with a hole in it to fit your victims head inside, then close the neck doors to lock them
in. It's a humiliating position to be in.  There are 2 poses for V4 in the Core Elements pose library.
 
Hover Carrier: This is a hovering body transport devise to transport your victims around. There is a pose for V4 to fit in the
carrier in the Core Elements pose library.  You can use the hover carrier to take a victim to the chopping block. The carriers
arms are posable.
 
Hover Cart: Transport your victims, dead or alive with this cool overing cart. Grip handles are posable, control panel is
ambient lit for dimly lit scenes.  A pose for V4 driving it is in the Core Elements pose library.
 
Punisher and paddle/whips: The punisher is an automated whipping/paddling machine on a flexible stalk. The stalk has
easypose bending built in. There are 2 versions, one with 2 easypose whips and one with 2 paddles. The whip has easypose
bending built in, the paddles have a forward and backward bend morph built in.
 
The punisher paddle and whip comes as their own separate figures. They are pre-parented to the punisher assemblies.
 
Vertical Rack: This is a fully posable vertical stretching and restraining rack. The cuff bases pose independantly of the arm
and leg cuffs for easier posing setups.  The cuffs and cuff bases have symmetrical posing ability, you only need to pose one
side of your cuffs and v4 figure, then mirror the pose to the other side with the figure/symmetry command.  It is recommended
to first pose your v4 figure, then pose the arm and leg cuffs on one side, then pose the cuff base.  The cuffs open and
close for a before and after look.  The arms can move up and down, the control box is posable.  There is a V4 pose for the
vertical rack in the Core Elements pose library.
 
BODY BENDERS PACKAGE:
Note: These body benders are designed and positioned for V4 only. No other figures have been tested with the benders.

Body benders are pre configured restrainers that bend your V4 characters and hold them in very compromising and
humiliating positions. Some have moving parts, most don't.

For each body bender, there is a corresponding pose in the TERMINUS-3 / Body Benders pose library.  
Add your V4 character, add the body bender(s) of choise, then apply the V4 pose. Then parent the V4 charcter to the bender,
or parent the bender to the V4 character, plan ahead to see which will be moving and which will be stationary. This is
important if you want to attach the bender to one of the 2 hoists or another item.
 
Body Bender 8 has the cuffs attached to the pole. You can move the cuffs/v4 figure up and down the pole depending
on your needs.
 
Fmach = Fuck Machine

Fmack 1 Base: A flexible base with easypose bending. You can attach the Fmach 1 machine to it or anything else
you'd like
 
Fmach 1 Machine.  A fuck machine with 2 dildo heads. Dildos are attached to a stem with easypose bending for
those hard to reach places.

Fmach 1 Combo: The base and Fmach 1 parented together.

Hoist 1 and 2 (large and small): Use these hoists to parent the body bender/v4 combo to.  The hoists have bending, rotating and
and height/length adjustments.  Bend and twist your victim to your desire.
 
THE CARROUSEL
The carrousel is a fuck machine tower of power, pain and pleasure. Several tool attachments are provided to pleasure, torment
and even execute your victims.  The package comes with many pre-assembled parts to get you going right away.
 
Armature 1: This arm is a tool/equipment holder. It is completely articulated and posable and has height, length and rotation
adjustments.  Add a tool of your own, or choose from several pre-assembled armatures.
 
Armature 2 Assem: This armature is for holding the B4 Body Harness and your V4 character. A pose file is provided for your
V4 character in the TERMINUS-3 / The Carrousel pose library.  Add the Armature to your scene, add your V4 character, apply
the pose to V4 from the pose library and she will be positioned in the harness. Depending on your character, slight adjustments
may have to be made. Parent V4 to the body harness.  Now you can paren the Armature to the Tower.

Armature 2 and body Harness: These are provided stand alone if you need them, but I recommend using the assembly
mentioned above.
 
I will mention all the tools/figures below, please bear in mind that they are all pre-assembled and combined with
armature 1 in the figures library.  
 
Dunk Tub: This is a tub with an adjustable fluid/water level.  Dunk you V4 character into the tub upside down and watch
her struggle through the viewing window.
 
Electo Slide: This figure is a motorized slider with 2 types of electrodes attached. One type is an old fashion spark plug
looking device and the other is a set of bumpy nodes on the top and sides of the slide.  You can turn off either one by
clicking on it and making it hidden. The bumpy one is reduced in size and hidden inslide the slide arm.
 
Feeder, Feeder Flex Tube and Head vise: There is a feeder machine that has a fuck machine style feeder dildo (with up and
down bending morphs) attached to a housing. There is a feeding tank at the back of the machine. The flexible tube has
easypose bending built in. The Head Vise is a vise that clamps onto your Victims head, forcing the mouth wide open (there is
a mouth open pose in the TERMINUS-3  "expression/face" library. 
There is a pre-assembly of the headvise/flex tube and feeder in the package.  The feeder is also pre-parented to the milker/feeder
assembly
 
Milker/Vacuum: This devise has 2 milk/fluid tanks with adjustable levels of fluid. Attached to the Milker is an easypose vacuum hose
attachment.  The Vacuum devise works backward than you would normally think. You first position and pose one of the vacuum cups
at the end, then pose the tube back up toward the base.  Then you can symmetrically mirror the pose to the other side.  I
have created this method backward because it is hard to position the suction cups from the normal direction. It's far easier
to start at the breast and work your way back to the base. Any segments that protrude from the base can be turned off after
posing.

Fmach 1: Fmach = Fuck machine.  This fuck machine has 2 separate dildo heads on adjustable pistons and bases.
 
Fmach 2: this is a 4 headed fuck machine on a spinning axle. The dildo heads can move in and out of their bases. 4 heads
to choose from.
 
Garrot: this is a chocking/breath play devise with a neck cable/rod that moves in and out.  Fuck your victim while chocking
is a popular theme.
 
Snips: This is a decapitating devise.  The blades move side to side for a clean cut.
 
Tower rings: These can be parented to the tower. You can attach several of the armatures to the ring and use the ring to
rotate the whole set of armatures, like a carrousel. There is an upper and lower ring.
 
Assem Ring Full: this is a pre-assembled lower ring with several of the armatures attachements already parented. Just add
it to a tower.
 
Assem Tower Full: This is a full tower with the lower ring assembly, armatures and body harness armature. Just add V4,
poser her and parent her to the Body Harness.
 
Tower and Tower Pad: The tower is the base of the Carrousel, add armatures or rings/armatures as needed, the pad is a circular
floor pad you can add beneath the tower if you want.

Tips for rendering.

Lighting is sometimes a hard effect to achieve. Poser's lighting ability leaves something to be desired.

For all my renders, I generally use 3 lights. 1 light has shadow casting turned on, the other 2 do not.  I use the
shadow casting light to shine from behind the camera toward the subject in order to get a shadow to fall on the
floor behind the subject. The other 2 lights can be used for adding more light when needed. 
In general, I turn off the shadow casting for ceilings and floors on my models, this allows light to pass through
onto your subject without causing a very dark room.

Thanks again for your purchase, I hope you enjoy it.

Davorama
[email removed]