Thank you for puchasing The Pulp Noir interior setting "The Dungeon Set 1" and bondage furnishings from Davo

To install, open the zip file and extract the contents (make sure "use folders" option is checked) to
the location of your poser.exe file.

For example: c:/program files/curious labs/poser 5

Do not include "runtime" in the extraction path, it is already specified in the zip file.




The files will be extracted to:

Figures/Characters library:

Pulp Noir / The Dungeon 1 / Furnishings (bondage devices and figures)
Pulp Noir / The Dungeon 1 / Room (circular room, door wall, window wall and candlestick)

Props library:

Pulp Noir / Dungeon Sets (this is the smart prop wrist and ankle cuffs for m3, m4, v3 and v4)

Pose files library:

Pulp Noir / The Dungeon 1



 
The Dungeon interior room is comprised of:

- Chamber: A circular room with 4 walls, 4 columns, floor and ceiling.  The room is parented to a floor figure
that overlays the original floor (which had a mesh error)  There is no door or windows. There are two
versions of the room, one with and one without shadow casting ability.  The non-shadow casting version is good
if you don't have a lot of experience with lights and want light to pass through the walls. 
 
- Chamber Door wall and Window Wall:  These are add-on walls that can be used if you need them. Simply import a
wall and hide the original wall behind it.  The add-on walls rotate from the center of the room. You can move them
further back and forth to adjust the room size. The door is posable.

- Candle Stick: This is a large candlestick and floor holder.  Use as many as needed to populate the room.




The Dungeon Set 1 furnishings are described below:

Chopping Axe: An axe that you can parent to your character of choice.
 
Chopping Block: This is a fully posable chopping block with ankle and wrist cuffs. The cuffs are fully posable
and positionalbe.  The cuffs also have symmetrical mirroring ability. Just pose one side and mirror to the other.
There is a pose file for Vicky 4 in the poses folder.  If you don't want the leg restraints, just move the beam
under the floor and the leg restraints will move with it, out of view.
 
Dildo Arm Stand Alone: This is a posable wood dildo holder.  It is fully posable, you can use it anywhere. You can
attach it to another figure or device.
 
Dunking Post: This is a post with posable ankle and wrist cuffs. The cuffs also have symmetrical mirroring ability. 
Just pose one side and mirror to the other. The beam rotates on a pivot bar and can be used to dunk your victims into
the supplied Dunking Tub. There is a pose file for Vicky 4 in the poses folder.
 
Dunking Tub: This is a wood tub with an adjustable water level.
 
Hanging Chains: This figure mounts onto the centeral ceiling column. It has posable chains that have symmetrical mirroring
ability. There are two pose files for Vicky 4 in the poses folder, one for upside down hanging and one for arm hanging. 

Small Post: This is small floor mounted post with a chain link/loop at the top. The post is height adjustable. You can use
this to fasten the wrist or ankle cuffs of your character to.
 
Squat Stool: This is a small stool with a dildo attached.  It is fully posable and has symmetrical mirroring ability.
There is a pose file included for V4 as wall as a pose file for the stool in an "usused" condition. The dildo is
positionable.
 
Table 1: This is a back bending table with posable wrist and ankle cuffs (symmetrical mirroring). The table with the
cuffs can tilt up an down. The shaft/post can move up and down. There is a pose file for V4 included in the pose library.
 
Table 2: This is a humiliating "lick yourself" back bending table with posable wrist and ankle cuffs (symmetrical mirroring).
The table can tilt up and down and the post/shaft can be height adjusted. There is a back bar with a spike that keeps the
character in a folded position, this can be adjusted or hidden. There is a pose file for V4 included.
 
Table 3: This is another back bending table with 2 part legs. There are fixed ankle and wrist cuffs on the back side.
The table and lower legs can be tilted up and down. There is a pose file for V4 included.
 
Table 4: This is more of a post/shaft figure with ankle an wrist cuffs (symmetrical mirroring), and a dildo armature that
is fully posable.  The post/shaft can be height adjusted.  There is a pose file for V4 included.
 
T-Bar Post: This is a height adjustable post with a T-bar at the top. The cuffs on the t-bar are fully posable and
symmetrical posable. There are 2 pose files for V4 included in the pose library.

T-Bar Ball and Chain: This is a posable ball and chain that can be added to the ankle cuffs of your character. This can
be used to add uncomfortable weight to a suspended character.
 
Tool Holder: This is a fully posable stone and wood dildo holding armature.
 

Props:

There are smart prop wrist and ankle cuffs with rope or chain loops attached to them.  These are smart props and
will snap into place and be parented to your character automaticaly.  There are cuffs for M3, M4, V3 and V4.

 
Please enjoy and have fun with this product. Any questions, email me at [email removed]

Cheers,
Davo