Thank you for puchasing The Pulp Noir "Water Works" package from Davo

To install, open the zip file and extract the contents (make sure "use folders" option is checked) to
the location of your poser.exe file.

For example: c:/program files/curious labs/poser 5

Do not include "runtime" in the extraction path, it is already specified in the zip file.


The files will be extracted to:

Figures/Characters library:

Pulp Noir / Water Works / (facility/room, Pipe set options and tank props)


Pose library:

Pulp Noir / Water Works / (subfolder for Anchor and Bucket / Chain and Ball / Chain and weight / Holding Pole / Chain set)


Props library:

Pulp Noir / Water Works / smart prop ankle, wrist and neck cuffs for M3, V3, M4 and V4


 
The Water Works figures are described below..

Room with Shadows: This is the water works facility/room.  It has left, right and rear walls, front door (with rollup door) wall,
ceiling lamps (parented to ceiling), ceiling, floor, posable light switch and electrical control box/panel.  The light switch and
control panel can be moved to any location that suites you.  All elements of the room can be moved out of view for better
camera and rendering views.  The shadow casting version has all elements of the room with shadow casting ability turned on. This
is for more experienced users with lighting experience. 

Room No Shadows: Same description as above, except all elements of the room allow light to pass through, this allows novice users to
more easily set up lighting in the room.

SPECIAL NOTE ON WATER TANKS: The tanks can be used as holding cells without water, you can just move the water level below the floor.

Water Tank 1: Tank 1 is a large cylindrical tank with posable door, movable/posable valve and pipes, adjustable water level with
wave deformer (P5+ only for wave deformer), movable lid, movable top bar (which can be used to hang chains from).  This tank can
accomodate more than one figure.  You can move the water level up and down as desired.

Water Tank 2: Tank 2 is a smaller cylindrical tank with posable/movable pipe and valve, movable lid, movable top bar (to hang things from),
adjustable water level with wave deformer (p5+ only).  

Water Tank 3: This is a very large tank with posable door, removable lid, adjustable water level (water level is parented to the tank, the
original water level mesh was not high res enough), posable valve and pipe with concrete pad.  This tank is very large and can fit several
figures inside.


PIPE SET OPTIONS FOLDER:

The pipe set is a figure comprised of 5 main pipe features.  A large diameter pipe, a small diameter pipe, a valve with wheel,
a 90 degree elbow pipe with re-positionable flanges and a large holding tank plate.  There is a null base figure in the shape
of a diamond that all the pipe elements are attached to.  Move the null base around to move all the pipes.  

Pipe Set Unposed: This is an unposes set of pipes.  I have spread them out a little so you can see them clearly.  You can use this
as a starter if you want to make more posed pipe options.

Pipe Setup 01 thru 05: These are posed pipe sets. They run along the right side wall and back wall.  You can insert as many as you'd like
to populate the scene. I did not make left wall pipe options.

After inserting each pipe set, you can parent thier null base to the floor, or to the wall you attached them to.


TANK PROPS FOLDER:

Special Note for tank props:  All the tank props are positioned to be level with the room/facility floor.  The water tanks each have
differing tank floor elevations, so you will have to make manual adjustments after inserting the prop, your character and applying the pose:

1). Insert your character (add smart prop neck, wrist or ankle cuffs as needed)
2). Insert your prop of choice
3). Apply the pose of choice for your prop. Some poses require a pose for the prop and your V4 character.
4). Parent your character to the prop.
5). Move the prop up to the interior floor level of the tank you used.

The props (figures):

Anchor: This is a large anchor for water peril lovers. It has 3 posable rings and an adjustable height cross bar. There are pose
files associated with this prop in the pose library.

Balloon (left and right): This is cool balloon prop with balloon, string and ring (each posable for angle/size). There are 2 versions,
one each to get you close to V4's nipples. You will have to adjust/position them, then parent them to her chest.
 
Bubbles: This is an air bubbles figure. You can add as many to the scene as you like, position them where you like.
 
Bucket and Concrete: This is the classic "concrete shoes" prop. A bucket filled with concrete. There is a starter pose for V4 in the pose library.
 
Chain and Ball / Chain and Weight: This is a ball, or heavy weight figure with posable chain.  There are "progressive" pose files for
v4 and the ball/weight in the pose library. Use the smart prop anchor cuffs with this setup.
 
Chain Set: This is a posable chain set with 2 chain bases and 2 chains. The chains feature symmetrical mirroring ability.  Both chain bases
are parented to a non-rendering null base which can be used to move both chain bases at the same time. The first link of each chain can
move up and down to adjust the length of the chains. The unseen portion of the chain will be below floor level.  There are 2 "progressive"
pose sets for the chains in the pose library. Pose 1a - 1d and Pose 2a - 2d.  Use the ankle cuffs for pose 1, ankle and wrist cuffs for pose 2.
I did not include, but you can use the chains to be suspended from the top bars in tanks 1 and 2.

Holding Pole: This is a straight pole with neck, wrist and ankle ring/loops. This figure has symmetrical mirroring ability. There is a pose
file for the pole and V4 in the pose library.
 
Oxygen Mask: This is mask fit for V4. You can position and parent it to her head.  The hose has easypose bending technology. You can
run the hose from the mask to fit into the supplied oxygen tank.  You need to use the 'MOUTH OPEN WIDE' morph on v4.2++ to make her
jaw match the lower edge of the mask. This is to make it appear her mouth is forced open. This is by design. Parent the mask to your
characters head.  Any usused portion of the hose after it attaches to the oxygen tank can be turned off.
 
Oxygen Tank: This is a small oxygen tank with posable air level indicator.
 

POSE LIBRARIES:

There are pose libraries for most of the tank props. These are fit for V4 only. 


Props:

There are smart prop wrist and ankle cuffs with rope or chain loops attached to them.  These are smart props and
will snap into place and be parented to your character automaticaly.  There are cuffs for M3, M4, V3 and V4.


Special Note to Customers:
There are some rope and taped mouth props shown in the promo images for this product. These items are not included,
but are excellent companion products for this package. These products are available in the Davo store at renderotica:
V4 Rope and Band "Tight Kit"
V4 "Training Kit"
V4 "Tape and cloth Gag" package
V4 "Masks and Gags" package

 
Please enjoy and have fun with this product. Any questions, email me at [email removed]

Cheers,
Davo