The Office Tower 09/16/12 by Richabri (Rick Bridenbaker) [email removed] =============================================================================== Thank you for purchasing the The Office Tower Set! All of this product's content was created by Richabri. =============================================================================== Description: =============================================================================== The Office Tower is a set of twelve props replicating a modern office building complete with furniture and accent pieces. The set also features a separate side wall and front wall that can be used or not depending on your scene requirements. The Office Tower set provides a fully modeled interior and exterior so it can be used as both an exterior building model or interior office building lobby. Although the actual office rooms are not defined, all of the doors leading into the spaces swing open to simulate entering and exiting the office areas. The tower office area is a separate prop and can be stacked to create a tower of any desired height. The spacious interior provides an upper deck area along with a fully modeled elevator complete with posable doors. Also included is a separate grounds prop that includes movable site lighting and a small plaza area. The Office Tower set comes with a PZ3 files that will load in the set with all of the room props and a default lighting scheme and also provides ten camera presets to move about the interior. Light-weight and functional The Office Tower set will accommodate any of your office building - lobby scenes. You will need Poser 5 (or higher) or Daz Studio to use this set. =============================================================================== The Office Tower package includes the following room props: Props (PP2): ========================= !!OB-Base !!OB-Grounds !OB-Frontwall !OB-Sidewall !OB-Tower OB-Chair OB-Chair_Duo OB-Counter OB-Picture OB-Planter OB-Table OB-W_Cooler =============================================================================== Everything comes as Poser ready props that can be loaded from the content palette under the Props section. The Office Tower package also comes with all of the texture templates to allow you to give the props a custom look of your own design. ============================================================================= Notes: ============================================================================= The doors have their joint parameters adjusted to swing open from the hinges with a normal Y-Rotation. There is no limit to the swing however and you should be careful to control the final position of the door being opened. The elevator doors can be opened and closed with a Z-Translate and they will move into the wall cavities. The lighting rig uses four lights with only light (Main) having the ability to create shadows and the other three providing fill and ambient lighting. This lighting preset is provided to give a general illumination of this set. It should be adequate for most scenes but I highly recommend adjusting it for any specific scenes you may create if you choose to use it. ====================================================== INSTALLATION: ====================================================== Unzip the archive (OfficeTower.zip) to the root folder wherever you installed Poser: (i.e., C:\Program Files\Smith Micro\Poser 8). The files will decompress to the following folders: /Documentation OfficeTower.txt License.Txt /Runtime /Geometries /Richabri /OfficeBuilding ob-base.obj ob-chair.obj ob-chair_duo.obj ob-counter.obj ob-e_door.obj ob-ev_door.obj ob-f_wall.obj ob-grounds.obj ob-i_door.obj ob-picture.obj ob-planter.obj ob-s_lite.obj ob-s_wall.obj ob-table.obj ob-tower.obj ob-w_cooler.obj /Libraries /Camera /OfficeTower OT #01 35MM.cm2 OT #01 35MM.png OT #02 35MM.cm2 OT #02 35MM.png OT #03 35MM.cm2 OT #03 35MM.png OT #04 35MM.cm2 OT #04 35MM.png OT #05 35MM.cm2 OT #05 35MM.png OT #06 35MM.cm2 OT #06 35MM.png OT #07 35MM.cm2 OT #07 35MM.png OT #08 35MM.cm2 OT #08 35MM.png OT #09 35MM.cm2 OT #09 35MM.png OT #10 35MM.cm2 OT #10 35MM.png /Light /OfficeTower !Default Lighting.lt2 !Default Lighting.png /Props /OfficeTower !!OB-Base.png !!OB-Base.pp2 !!OB-Grounds.png !!OB-Grounds.pp2 !OB-Frontwall.png !OB-Frontwall.pp2 !OB-Sidewall.png !OB-Sidewall.pp2 !OB-Tower.png !OB-Tower.pp2 OB-Chair.png OB-Chair.pp2 OB-Chair_Duo.png OB-Chair_Duo.pp2 OB-Counter.png OB-Counter.pp2 OB-Picture.png OB-Picture.pp2 OB-Planter.png OB-Planter.pp2 OB-Table.png OB-Table.pp2 OB-W_Cooler.png OB-W_Cooler.pp2 /Textures /Richabri /OfficeBuilding ob-c-shelf.jpg ob-ceiling.jpg ob-chair.jpg ob-counter.jpg ob-e_door.jpg ob-el_door.jpg ob-elevator.jpg ob-f_wall.jpg ob-fl_lites.jpg ob-floor.jpg ob-gref.JPG ob-grounds.jpg ob-i_door.jpg ob-i_wall.jpg ob-i_wallB.jpg ob-mref.jpg ob-o_wall.jpg ob-p_lites.jpg ob-picture.jpg ob-picture2.jpg ob-planter.jpg ob-pvc.jpg ob-s_lites.jpg ob-s_wall.jpg ob-table.jpg ob-tower.jpg ob-u_deck.jpg ob-w_cooler.jpg /Template /OfficeTower OfficeTower_template.txt ob-c-shelfT.jpg ob-ceilingT.jpg ob-chairT.jpg ob-counterT.jpg ob-e_doorT.jpg ob-el_doorT.jpg ob-elevatorT.jpg ob-f_wallT.jpg ob-fl_litesT.jpg ob-floorT.jpg ob-groundsT.jpg ob-i_doorT.jpg ob-i_wallT.jpg ob-o_wallT.jpg ob-p_litesT.jpg ob-pictureT.jpg ob-planterT.jpg ob-s_litesT.jpg ob-s_wallT.jpg ob-tableT.jpg ob-towerT.jpg ob-u_deckT.jpg ob-w_coolerT.jpg /!OfficeTower PZ3s OfficeTower.pz3 ============================================================================= The Office Tower props should already be appropriately scaled for Daz's Mil characters. Some adjustments may be necessary to account for different body morphs. If you have any difficulties with the installation or use of these figures and props, please email me with a description of your problem and I will respond promptly. Happy Rendering !!!! Rick: [email removed]