The Prison Yard																								05/17/18
by
Richabri (Rick Bridenbaker)

http://www.cgbytes.com/content-artists/Richabri/126

Thank you for purchasing the The Prison Yard set for Poser!


All of this product's content was created by Richabri.


===============================================================================
Description:
===============================================================================
The Prison Yard is a 5-piece (PP2) prop set replicating a vintage prison yard
setting complete with a watchtower and searchlight prop. Because the focus of 
the set is on the prison yard itself, all of the wall props are mere facades 
rather than fully developed building structures. This makes the set into a very
light weight mesh even when fully using all of the set's elements which I thought 
was necessary if the yard was going to be populated with many characters.

All areas of the set are completely accessible to the camera due to the modular
design of the set that allows almost every set element to be used/removed from 
your scene as necessary.

The Prison Yard also comes with a PZ3 file that will load in the complete 
set with a default lighting scheme and all render parameters set to go.

The Prison Yard set includes everything you need to set up a prison yard 
scene including:

Props (PP2):
====================

!Yard
Guard Tower
Wall-Back
Wall-Front
Wall-Left
Wall-Right
           
           
Everything comes as Poser ready props that can be loaded from the content 
palette under the Props section or for even easier use, load the PZ3 scene 
file that will load in the props with a default lighting rig.

The Prison Yard also comes with all of the texture templates to allow
you to give the props a custom look of your own design.

You will need Poser 5 (or higher) or Daz Studio to use this set.


=============================================================================
Notes:
===============================================================================
The lighting rig uses one point light (Main) and three infinite lights with only 
the 'Main' light having the ability to create shadows and the other three 
providing fill and ambient lighting. The (Main) light in this case simulates the
sun as an overhead light source.

All doors have their joint parameters adjusted to swing open from the hinges with
a normal Y-Rotation. There are no limits to the swing however so you should be 
careful to control the final position of the door(s) being opened.
===============================================================================

To install:

Unzip the archive (Prison-Yard.zip) to the root folder
  wherever you installed Poser:
  (i.e., C:\Program Files\Smith Micro\Poser 8).
  
  The files will decompress to the following folders:
  
  /Documentation
    Prison-Yard.txt
    License.Txt
     
  /Runtime
    /Geometries
      /Richabri
        /Prison-Yard
         py-b_wall.obj
         py-f_wall.obj
         py-g_tower.obj
         py-j_door.obj
         py-l_wall.obj
         py-r_wall.obj
         py-s_light.obj
         py-yard.objht.obj
           
     /Libraries
      /Light
         /Prison-Yard
          !Default Lighting.lt2
          !Default Lighting.png
         
       /Props
          /Prison-Yard
           !Yard.png
           !Yard.pp2
           Guard Tower.png
           Guard Tower.pp2
           Wall-Back.png
           Wall-Back.pp2
           Wall-Front.png
           Wall-Front.pp2
           Wall-Left.png
           Wall-Left.pp2
           Wall-Right.png
           Wall-Right.pp2
            
       /Scene
         Prison-Yard
          Prison Yard.png
          Prison Yard.pz3
         
     /Textures
        /Richabri
           /Prison-Yard
            py-building.jpg
            py-c_window.jpg
            py-doors.jpg
            py-f_wall.jpg
            py-fixtures.jpg
            py-gref.jpg
            py-grounds.jpg
            py-guard_tower.jpg
            py-halways.jpg
            py-mref.jpg
            py-roof.jpg
            py-searchlight.jpg
            py-wall.jpg
             
     /Templates
      /Richabri
       /Prison-Yard
        Prison-Yard_Templates.txt
        py-buildingT.jpg
        py-c_windowT.jpg
        py-doorsT.jpg
        py-f_wallT.jpg
        py-fixturesT.jpg
        py-groundsT.jpg
        py-guard_towerT.jpg
        py-halwaysT.jpg
        py-roofT.jpg
        py-searchlightT.jpg
        py-wallT.jpg
            
   
===============================================================================

The Prison Yard props should already be appropriately scaled for a standard Daz 
or Poser character.

If you have any difficulties with the installation or use of these props please
email me with a description of your problem and I will respond promptly.

Happy Rendering !!!!