Thank you for puchasing The Pulp Noir interior setting "Qonset Hut" Electro Torture Pack from Davo ------------------------------------------------------------------------------------------------------------------ To install, open the zip file and extract the contents (make sure "use folders" option is checked) to the location of your poser.exe file. For example: c:/program files/curious labs/poser 5 Do not include "runtime" in the extraction path, it is already specified in the zip file. The files will be extracted to: Figures/Characters library: Pulp Noir / Quonset Hut / Electro Set (electro torture equipment) --------------------------- Props library: Pulp Noir / Quonset Hut / (old metal textured wrist, ankle and neck cuffs for M3, V3, M4 and V4) --------------------------- Figure Pose files library: Pulp Noir / Quonset Hut / Electro Set (pose files for v4 for the electo bed frame and hand held shock box grips for V4 and M4) --------------------------- Hand Pose files library: Pulp Noir / Quonset Hut / Electro Set (electo wand hand grip poses for V4 and M4) ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ Electro-Torture Package: SPECIAL NOTE: The wires (shown in the main cover promo image) are all post-worked in a paint program. I have provided some easypose cables in long and short versions, however, it's kind of difficult to adjust and control several of them, so I use post work. The decision to use them is up to you. Battery: This is a battery with top and front panel terminals. There are 2 easypose cables attached to the battery. You can move the cables to the front of battery. The cables have easypose bending technology. Cables (long and short, red and black) There are long and short easypose cables in this package. The the cables have easypose control nodes every 20 segments of the cable. These are easily identified in poser, they show up in wireframe display mode. The long cord has 200 segments, the short one 100. The ends of the cords have a jack and plug. The plug can move in and out to hide it in case you want to connect the cables to each other. Please note: The cables have a lot of easypose information in the cr2 files. If you parent the cable to another item and save it back to the library, the item may not load properly or hang up poser. It's best to attach the cable in your scene and save the scene as a pz3 file, not back to the library. I recommend using post work wiring in your images. Cart-Stand: This is a simple cart to hold your equipment. It has a height adjustable lower shelf. There is a pre-assembled cart that has the battery and large shock box controller on top. Clamp-coil style: This is a clamp with a copper coil attached to the ends. This is good for applying to the tongue of your character. When inserted, the clamp comes in near the face. Parent to the tongue after inserting and positioning. Clamp-Gator Style: this is an alligator style clamp. There is a right and left version that brings the clamps in near the right and left breast. Parent the clamps to the chest of your character after positioning them. You can post work or plug in a cable to the clamps. Electro Bed: This bed frame has metal straps, an adjustable head and foot bar to attach the chains to, and 4 chains for the wrists and ankles. The chains have symmetrical mirroring ability. There is a re-positionable electric jack plug-in on one of the legs. You can plug a cable into this jack and run it to one of the shock box controllers. You can move this jack to any of the legs. There is a pose file for the Bed and V4 in the pose library. Use the smart prop wrist and ankle cuffs with this item. Electro Pad: this is a floor pad with plug in jacks. You can attach cables or post work cables in your renders. Electro Shock Box: This is a larger shock controller box with posable dial, switch and indicator needle. Electro shock hand held: this is a smaller controller with posable switch, dial and indicator needle. It has 2 plug ins to attach cables to or you can post work wiring in your renders. There is an initial Holding pose file for v4 and m4 in the pose library, and a matching pose file for the controller. Apply both, then parent the controller to the right hand. Electro Wand for M4 and V4: This is a shock wand with plug-in on the bottom. You can attach a cable to the wand. There is a version for M4 and V4, this puts the wand in a default position for each character. 1) Insert your M4 or V4 2) use the joint editor to "zero" your character 3) Insert the wand, parent to right hand 4) Apply the hand pose for your character from the hands library. Props There are smart prop neck, wrist and ankle cuffs in the props folder. Use these in conjunction with the electro bed. ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------ Please enjoy and have fun with this product. Any questions, email me at [email removed] Cheers, Davo / davorama