The Boxing Gym http://www.cgbytes.com/content-artists/Richabri/126 11/19/17 by Richabri (Rick Bridenbaker) =============================================================================== Thank you for purchasing The Boxing Gym set! All of this product's content was created by Richabri. =============================================================================== Description: =============================================================================== The Boxing Gym is a set of thirteen props replicating a retro-styled boxing gym complete with the boxing gear and equipment needed to set up a boxing scene. The Boxing Gym set gives you both a detailed, usable exterior building model along with a spacious interior setting that can be used as a general commercial setting as well as its intended use as a retro-styled gym setting. The Boxing Gym set uses a modular design that allows you to move and/or remove any of the building elements as your scene requires and make it easier to set up a scene in every part of the set. Light-weight and functional the Boxing Gym set will accommodate any of your boxing gym scenes. You will need Poser 5 (or higher) or Daz Studio to use this set. =============================================================================== The Boxing Gym set includes the following props: Building Props (PP2): ========================= !!Roof !Base !Wall-Back !Wall-Front !Wall-Left !Wall-Right Boxing Gear Props: ========================= Glove Left Glove Right Helmet Equipment Props: ======================== Boxing Ring Punching Bag Speed Bag Weight Set =============================================================================== Everything comes as Poser ready props that can be loaded from the content palette under the Props section or for even easier use - just load in one of the included PZ3 Poser scene files. Two PZ3 scene files are provided to set up either an internal render (Boxing-Gym_Indoor.pz3) or an external one (Boxing-Gym_Outdoor.pz3). Two separate lighting presets are provided to compliment either choice. The Boxing Gym set also comes with all of the texture templates to allow you to give the props a custom look of your own design. ============================================================================= Notes: ============================================================================= The front doors have their joint parameters adjusted to swing open from their hinge areas with a normal Y-Rotation. There is no limit to the swing however and you should be careful to control the final position of the door being opened or closed. The 'indoor' lighting rig uses one point light (Main) and three infinite lights with only the 'Main' light having the ability to create shadows and the other three providing fill and ambient lighting. The only difference in the 'outdoor' lighting rig is that the point light (Main) is replaced with an infinite light. Although these lighting rigs provide a fairly balanced lighting of the interior or exterior I highly recommend adjusting them for any specific scenes you may create if you choose to use them. The Boxing Gloves and Helmet gear are provided as props which have been designed to be smartpropped to a Daz M4 character but they can easily be scaled and or repositioned to work with any Poser or Daz character. Since the Boxing Gloves are props however, they will not bend (conform) to any character and so you have to 'make invisible' all of the hand and finger elements of whatever character you intend to use them with. ====================================================== INSTALLATION: ====================================================== Unzip the archive (Boxing-Gym.zip) to the root folder wherever you installed Poser: (i.e., C:\Program Files\Smith Micro\Poser 8). The files will decompress to the following folders: /Documentation Boxing-Gym.txt License.Txt /Runtime /Geometries /Richabri /Boxing-Gym bxr-b_gloveL.obj bxr-b_gloveR.obj bxr-b_helmet.obj bxr-bk_wall.obj bxr-doorL.obj bxr-doorR.obj bxr-floor.obj bxr-fr_wall.obj bxr-grounds.obj bxr-lt_wall.obj bxr-punchbag.obj bxr-ring.obj bxr-roof.obj bxr-rt_wall.obj bxr-speedbag.obj bxr-w_d-set.obj bxr-w_set.obj bxr-w_stand.obj /Libraries /Light /Boxing-Gym Indoor Lighting.lt2 Indoor Lighting.png Outdoor Lighting.lt2 Outdoor Lighting.png /Props /Boxing-Gym !!Roof.png !!Roof.pp2 !Base.png !Base.pp2 !Wall-Back.png !Wall-Back.pp2 !Wall-Front.png !Wall-Front.pp2 !Wall-Left.png !Wall-Left.pp2 !Wall-Right.png !Wall-Right.pp2 Boxing Ring.png Boxing Ring.pp2 Glove Left.png Glove Left.pp2 Glove Right.png Glove Right.pp2 Helmet.png Helmet.pp2 Punching Bag.png Punching Bag.pp2 Speed Bag.png Speed Bag.pp2 Weight Set.png Weight Set.pp2 /Scene /Boxing-Gym Boxing-Gym_Indoor.png Boxing-Gym_Indoor.pz3 Boxing-Gym_Outdoor.png Boxing-Gym_Outdoor.pz3 /Textures /Richabri /Boxing-Gym bxr-b_gloves.jpg bxr-b_joists.jpg bxr-c_posts2.jpg bxr-d-set.jpg bxr-door-frame.jpg bxr-electrics.jpg bxr-fl-light.jpg bxr-floor.jpg bxr-fr_sign.jpg bxr-grounds.jpg bxr-heatvent.jpg bxr-helmet.jpg bxr-mref.jpg bxr-ol_plate.jpg bxr-p_bag.jpg bxr-platform.jpg bxr-r_ropes2.jpg bxr-roof.jpg bxr-sp_bag.jpg bxr-w-set.jpg bxr-walls.jpg bxr-window.jpg bxr-wstand.jpg rb-gref.JPG rb-pvc.jpg /Template /Boxing-Gym Boxing-Gym_Templates.txt bxr-b_glovesT.jpg bxr-b_joistsT.jpg bxr-c_postsT.jpg bxr-d-setT.jpg bxr-door-frameT.jpg bxr-electricsT.jpg bxr-fl-lightT.jpg bxr-floorT.jpg bxr-fr_signT.jpg bxr-groundsT.jpg bxr-heatventT.jpg bxr-helmetT.jpg bxr-p_bagT.jpg bxr-platformT.jpg bxr-r_ropesT.jpg bxr-roofT.jpg bxr-sp_bagT.jpg bxr-w-setT.jpg bxr-wallsT.jpg bxr-windowT.jpg bxr-wstandT.jpg ============================================================================= The Boxing Gym props should already be appropriately scaled for Poser or Daz characters. If you have any difficulties with the installation or use of these props, please email me with a description of your problem and I will respond promptly. Happy Rendering !!!!