FlatBush for Genesis Female 8 / 8.1
Copyright (C) by Pushee-Ri, 2025
This is not a merchant ressource
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Thank you for using this project!

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


FlatBush allows you to use pubic hair underneath clothing. This offers new possibilities for transparent or 
semi-transparent clothing (lace) that are not possible with 3D pubic hair.


SEPARATE DIRECTORIES

Depending on the model you want to work with, select either GF8 (Genesis 8 Female) or GF81 (Genesis 8.1 Female). 
In these folders you will find the GeoShell scripts and the material presets.



SHELL and PRESETS

With the model selected, first use the "1st Create ..." script. This creates and selects a "FlatBush .." 
object for you. With "2nd Assign ..." preset you can now assign the first shape of the material presets to 
the selected shell object. To change the shape, switch to the folder Material -> Iray of the 
current directorie.



POKE THROUGHS

My shells have a much smaller distance to the skin than usual. This works well for most models. If your 
model does not conform to the standard and therefore poke throughs or other disorders occur, you can 
correct them as follows:

With the FlatBush shell selected in the "Scene" pane, switch to the "Parameters" pane -> Mesh Offset 
and increase the Offset Distance value in small steps (0.02), until the poke throughs disappear.



TOO DARK, TOO BRIGHT, TOO WHATEVER

Depending on the type or material setting of the clothing, the FlatBush object may shine through too dark 
or too light. Then switch (with the FlatBush shell selected) to "Surfaces" pane. There you can either change 
the "Base Color" setting or reduce/increase the "Cutout Opacity" until you like the setting.


REPOSITION FLATBUSH

You can reposition FlatBush. This is helpful if too much or too little is displayed in your scene. Then 
proceed as follows:

With the FlatBush shell selected in the "Scene" pan, switch to the "Surfaces" pane. Scroll down the list 
until you see the "Vertical Offset" option. By carefully changing this option (0.02 steps), you can move 
the FlatBush material vertically.



CAN I USE FLATBUSH WITH DAZ AE, GOLDEN PALLACE OR OTHER?

No - you can't use this project with GeoGrafts like Anatomical Elements, Golden Pallace or other. 
If you use FlatBush with GeoGrafts, you will only see a white area where the GeoGraft replaces 
the 3D faces of the model. 

FlatBush is designed solely for use under transparent or translucent clothing - and without genitals.



CAN I USE FLATBUSH WITHOUT CLOSES?

Sure - but keep in mind that this is a 2D project (aka "painted on") ... and that you can't use genitals.



Enjoy :)