BCiX Sweatpants for Genesis 9

Copyright by Pushee-Ri 2024. 
All Rights reserved. This is not a merchant resource.


-------------------------------------------------------------------------------------------------
F.A.Q.
..........................................................................

Q: Is the project difficult to use?
A: No. The only thing you need to pay attention to is to assign the Topping to the Garment rather than the model.

Q: Why can't I assign the Topping to the model?
A: You can - but this leads to misrepresentations, as the model and Topping have different weight maps.

Q: Can I just use the Topping?
A: Yes ... but you won't enjoy it. It will look like lumps of tar with white spots.

Q: Can I use the clothing without stains?
A: Yes, and this feature makes this project interesting for storytellers: start with the clothes without stains 
end the story with a big load.

Q: Can I combine different stain material presets?
A: Yes - but you need to adjust some values (see "Topping: the Push modifier")

Q: Why are there Topping Props for the front and for the back?
A: This is due to the way in which 3D materials are projected onto 3D surfaces (for experts: UV Seams). 
Without the division into front and rear view, the material would look very strange in certain cases (very strange!)

Q: The garment sometimes produces poke throughs . What can I do?
A: I describe two options below. See "Garments: handle poke throughs"

Q: The Topping material is not displayed. What can I do?
A: There can be two reasons for this: either you are using the wrong topping (i.e. you want to show the back but 
are using the topping for the front) or you have changed the offset of the clothing. In the first case, simply 
change the topping (or the camera angle) - in the second case, see below ("Topping: the Push modifier")

Q: In texture mode, the spots are barely visible when positioning. Any hint?
A: Switch to the Filament display mode and you can track the movement, scaling etc. in real time.

Q: How can I move, scale, etc. the Topping material?

Moving:
Simply select the Topping, switch to the "Surfaces" pane and scroll down the list of options until you see 
"Horizontal offset" or "Vertical offset". If you change the values (slightly!), you will see how the 
liquids change their position on the body of the model. That's it :)

Tipp: Select the desired material / preset before (!) you move it - otherwise (if you have found a 
great position and then change the material) the position will be reset.

Scaling / Flipping:
Select the Topping, switch to the "Surfaces" pane and scroll down the list of options until you see 
"Horizontal Tiles" or "Vertical Tiles". If you change the values to -1.00, the materials will be 
mirrored or flipped. 

You can also use the "Tiles" options to scale the materials. Smaller values enlarge the material, 
larger values reduce it ... and can also lead to doubling, as the changed value is a "Tile" option.

Tipp: switch to the Filament display mode to track the movement, scaling etc. in real time.




+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SPECIAL HINTS
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


TOPPING: THE PUSH MODIFIER

Like the garment objects, the topping props also have an activated "Push" modifier. You can use this "Push" 
modifier to remove interference, intersections or Iray artifacts.

With the Topping Prop selected, switch to the "Paramters" pane -> Mesh Offset and carefully increase the 
value until the intersections / artefacts disappear - or the Topping is displayed again.

You can also use this modifier if you want to combine several Topping materials by assigning a second Topping 
object to the garment: In the beginning, the second material will probably not be visible. Then simply follow 
the instructions above and increase the value until the second material is visible.