Legacy Davo Cannibal Kitchen Core Daz Studio
LgcyDavoCannibalKthn_Pop01RND.jpg LgcyDavoCannibalKthn_Pop02RND.jpg LgcyDavoCannibalKthn_Pop03RND.jpg LgcyDavoCannibalKthn_Pop04RND.jpg LgcyDavoCannibalKthn_Pop05RND.jpg LgcyDavoCannibalKthn_Pop06RND.jpg LgcyDavoCannibalKthn_Pop07CGB-(1).jpg

Description

What's on the menu tonight? Rotisserie Victoria, ground Betty or perhaps a simple filet of fish. The saga continues with Cannibal Kitchen Core Package (Hell's Kitchen 2). This diabolical set recreated from Davo's original is sure to please. This set has it all, poses for Victoria 4, Michael 4, Genesis 8 Female and Genesis 8 Male! With support for both 3Delight and Iray.

SYSTEM REQUIREMENTS:
 
- PC compatible 
- Not developed on a Mac. Performance cannot be guaranteed. Adjustments to poses may be required.
- Requires Daz Studio 4.8+
- Basic M4, V4, G8F or G8M
- All files in .obj, .cr2, .png .jpg and .duf format.
 
FIGURES FEATURES:
 
Auto Spitter: An adjustable height device to ram a spit pole through a character.  This is used in conjuction with the
Auto Spitter Station (for M4, V4 and G8F, G8M).  There is a spit pole pre-parented to the housing of the spitter. 
 
Auto Spitter Station (for M4, V4 and G8F, G8M):  This is the classic Jessica device made famous by Dolcette.  This station holds your character in a position primed to receive the spitting pole from the Auto Spitter. There are pose files for M4, V4 and G8F, G8M with matching load/poses for the station.
 
Cart 1: Simple push cart with adjustable middle shelf and a height adjustable fluid plane.  The fluid plane has a thin, bloody texture applied to it.  Pose files for pushing the cart are supplied for M4, V4 and G8F, G8M.
 
Display Case: Need somewhere to display your freshly cut or cooked meat?  The Display Case fits the bill. It's has 3 posable rear doors, adjustable shelves and plenty of room for a full character.
 
Freezer: This is a medium sized storage freezer with posable door, posable air circulation fans and posable hangers on the ceiling to hand your fresh meat. All walls, ceiling and door can be moved out of view for good renders.
 
Kitchen: This is a simple kitchen floor plan with posable walls, doors and ceiling lamps. The lamps can be repositioned anywhere.
 
Kitchen Xtra Wall: This is a large wall section that you can toss into the kitchen to break the floor plan into separate areas.
 
Kitchen Doors: This is and exta door figure if you want to add more entrances into the kitchen.
 
Kitchen Hood: This is an overhead exhaust hood to pull steam out of the kitchen. It has adjustable exhaust sprayers.
 
Oven 1: This is a large rotisserie style oven with posable doors and posable mounting brackets. Pose files for M4, V4, G8F, G8M and load/pose files for the Oven 1 are included.
 
Oven 2: This is a long baking oven. The sides and top can be hidden to show what's inside. The door and shelf is posable. Pose files for M4, V4, G8F, G8M and load/pose files for the Pan 1 (long) are included.
 
Oven 3: This is a oversized compact oven with posable door, racks and rack holders. Pose files for M4, V4, G8F, G8M and load/pose files for the Oven 3 are included.
 
Oven 4: This is a low profile oven with 2 stovetop burners on it. Pose files for M4, V4, G8F, G8M and Load/pose files for the Oven 4 and Pot are included.
 
OverHead Rails:  This is an overhead rail/trolly system to give the kitchen an assembly line look and feel.  There is a base node 
that can be used to move all parts at once.  There are right and left hand segments of rail in long, short and curved sections.  
There is a base part on each section that moves the rail, this allows you to keep the base at the ceiling level, but raise or lower the rails. This figure has right and left symmetrical mirroring. 
 
OverHead Slot Wall:  This is a narrow wall that you can guide the OverHead rails into so it looks like the characters are coming out of a narrow corridor, then cut, then exit the room. You can stack these end to end for longer slots. 
 
Pan 1,2 and 4: These are platter pans useful for cooking and displaying your characters.  There is a height adjustable fluid level in each pan with a thin watery texture.  Pose files for the pans and M4/V4 and G8F/G8M are provided. 
 
Pan 3: This is a display platter with vertical spit pole that your character is impaled upon. Pose files for the pans and M4/V4 and G8F/G8M are provided.
 
Pot 1: Simple pot with depth morph and adjustable fluid level.  Pose files are included to fit M4, V4 and G8F, G8M inside.
 
Scale:  A nice scale to weigh the goods. The holding plate has a width and depth morph, the dial arm can spin.
 
Snipper:  This is a head snipper, it has grabber arms that can hold the neck, then the blade slides out to snip.  The base is posable so it can be angle adjustable or used in robotic style.
 
Spit Pole and Spikes:  This is a spit pole with an add-on figure that puts holding spikes through your character so they won't spin on the pole.  
 
Table 1:  Simple table to lay our characters out on.  There is a drain hole and fluid catch basin at one end of the table. Pose files for M4, V4, G8F, G8M and load/pose files for the Table 1 are included.
 
Kitchen Assembly: This folder contains a pre-assembled room with freezer, Kitchen Overhead Hood, extra doors, OverHead rail system and Overhead Wall slots already parented to the floor.
 
Props:
Binder Cuffs - Arms:  This is a binder to hold your characters arms behind their back.  It is a smart prop and will parent to your characters chest. There is a pose file in the pose library to pose the arms only, the rest of your character will not be affected.
 
Binding Straps:  This is a couple of straps to hold your character in a kneeling position with arms behind back.  It is a smart prop and there is a pose for it in the Pot Pan Table folder.


 

Downloads

 
 

Application Compatibility

Daz StudioDaz Studio ArchiveDaz Studio 4.9
PoserNot Supported
 Not Tested

Figure Compatibility

Daz FiguresGeneration 4Michael 4
  Victoria 4
 Genesis 8Genesis 8 Female
  Genesis 8 Male


Required Products


Required 3rd Party Products
Genesis 8 Female and Male (https://www.daz3d.com/genesis-8-starter-essentials)

Related Products

Legacy Davo Hell's Kitchen
$24.99
 


Legacy Davo Cannibal Kitchen Core Daz Studio

SKU: 59568
By: FreeoneCGbytes

What's on the menu tonight? Rotisserie Victoria, The saga continues with Cannibal Kitchen. This set recreated from Davo's original is sure to please. This set has it all, poses for V4, M4, G8F and G8M! With support for both 3Delight and Iray.

$21.99



 
Views: 29276

Others Also Purchased

The Original 3 - Environment Bundle
$88.00
save 20%
 
Spermtacle
$10.00
 
Roasted, Toasted And Burnt To A Crisp
$7.00
50% off
 
Tentacle Dungeon - Tower of Despair
$35.00
 
Industrial Cooker Poses G8 Couple
$6.00
50% off
 
Industrial Cooker
$10.00
50% off
 
Wild Ride For Genesis 8 Figures
$10.00
 
Legacy Davo Cannibal Kitchen Expansion 1 DS
$21.99
 
Puppy Style For Genesis 8 Figures
$10.00
 
Legacy Davo Hell's Kitchen
$24.99
 

One of more of these images has been flagged as adult content.

If you are over 18 and wish to view these images, please hit Yes, otherwise hit No.