9/4/2017 6:38:34 PM by
FunFungi
(Edited: 9/4/2017 7:37:23 PM)
Views: 1845
Facility 3 "Silo" Expansion Pack For Daz Studio 4.8+
By: Davo, Freeone
Figure Library Descriptions:
Note: There are two libraries for the figures, a shadow and no shadow version. If you not proficient with lighting, the no shadow library has all the shadow casting ability turned off on all the elements. This allows light to pass through the figures without casting a shadow.
- Corridor: This is a corridor that is positioned behind the Silo core figures platform door. The walls and ceiling can be moved out of view for camera views. The rear door moves up and down. You can stack these corridors end to end by hiding the connector wall at the front of the corridor and moving the floor to the rear of another corridor figure.
- Dildo Station: This is a cool looking sci-fi style dildo station with two dildos with easy pose hoses. There is a dildo head with easy pose hose as well. You can use this as a camera or add a tool of your own to the tool head. There is a fluid storage tank that can be used for milking purposes if you add a milking teats figure to the tool head. There are a couple of antenna style appendages that can be repositioned or hidden. Most elements of the dildo station have morphs to adjust the size/shape of the station. The dildo heads have size/shape morphs as well. There are 3 ports that are repositionable on the station that you can pose the dildo head back into.
- Gyro: This is a gyroscope style restraint figure with rotating ring and 4 arm/leg restraint cuffs. Each restraint cuff rotates around the center of the gyroscope ring. Each cuff also has a posable/length adjustable post with a posable/length adjustable cuff ring. Pose files are provided for V4/M4 and G3F/G3M with matching load/poses for the gyroscope. Poses utilize standard "basic iron cuffs"
that are in the props library. This is a symmetrical posing figure.
- Post: This is a set of right and left hand posts with posable cuff mounts. The post bases can be slid side to side and the posts can rotate side to side. The cuff mounts move up and down and the posts and cuff rings on the mounts have length morphs. There is a non-rendering diamond shaped null base situated in between the posts, this is the base that moves the entire figure around. Pose files are provided for V4/M4 and G3F/G3M with matching load/poses for the post. Poses utilize standard "basic iron cuffs"
that are in the props library. This is a symmetrical posing figure.
- Rack: This is a very cool new vertical rack figure with adjustable height post, posable arm and leg restraint bars with cuff ring rod. There is also an articulated dildo armature with dildo and mini-vibrator with easy pose hose. The dildo has size/shape morphs as does the mini-vibrator. You can position the mini-vibrator then pose the easy pose hose back to its receptacle on the dildo shaft holder. The arms for the dildo and arm/leg arms have length morphs. Pose files are provided for V4/M4 and G3F/G3M with matching load/poses for the rack. Poses utilize standard "basic iron cuffs" that are in the props library.
- Probe: This is a large, menacing looking death ray style probe with three different tool tips such as antenna, laser beam and light beam. The probe has an easy pose hose that can be poses back into a repositionable hose receptacle. Each tool tip can be hidden, combined with each other or repositioned on the probe. The probe and tool tips also have an "overall scale" morph to make them smaller, this will not change the easy pose hose diameter or hose receptacle. There is a non-rendering diamong shaped null base situated just below the probe, this is the base that moves the entire figure around allowing the probe and hose receptacle to be posed independent of each other. There are a 2 wearable presets to
attach and parent the probe/hose to the ceiling of the silo figure if you have the Facility 3 "core package".
-----------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:
Note: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
Poses for the gyro, post, rack and matching poses for V4, G3F and G3M, M4 are provided in separate libraries.
-----------------------------------------------------------------------------------------------------------------------------------
Cuffs Library:
V4-M4 G3M-G3F: These are for V4-M4 and G3M-G3F figures.
These libraries contain smart prop cuffs to use in conjunction with the most of Davo's packages. These smart props will automatically position and parent to your characters. To apply the cuffs, click on your character in your preview window, then click to add the cuff(s), they will position automatically. Link props can be used to provide a link for using the cuffs like hand cuffs with a link the middle.
Product Requirements and Compatibiliy:
Daz Studio 4.8+
Poser Not Supported
Genesis 3 Female & Male
Victoria 4
Michael 4
Facility 3 "Silo" Expansion Pack For P8+
By: Davo
Figure Library Descriptions:
Note: There are two libraries for the figures, a shadow and no shadow version. If you not proficient with lighting, the no shadow library has all the shadow casting ability turned off on all the elements. This allows light to pass through the figures without casting a shadow.
- Corridor: This is a corridor that is positioned behind the Silo core figures platform door. The walls and ceiling can be moved out of view for camera views. The rear door moves up and down. You can stack these corridors end to end by hiding the connector wall at the front of the corridor and moving the floor to the rear of another corridor figure.
- Dildo Station: This is a cool looking sci-fi style dildo station with two dildos with easy pose hoses. There is a camera tool head with easy pose hose as well. You can use this as a camera or add a tool of your own to the tool head. There is a fluid storage tank that can be used for milking purposes if you add a milking teats figure to the tool head. There are a couple of antenna style appendages that can be repositioned or hidden. Most elements of the dildo station have morphs to adjust the size/shape of the station. The dildo heads have size/shape morphs as well. There are 3 ports that are repositionable on the station that you can pose the dildo heads back into.
- Gyro: This is a gyroscope style restraint figure with rotating ring and 4 arm/leg restraint cuffs. Each restraint cuff rotates around the center of the gyroscope ring. Each cuff also has a posable/length adjustable post with a posable/length adjustable cuff ring. Pose files are provided for V4/M4 (genesis 3 figures in DS version) and matching poses for the gyroscope. Poses utilize standard "basic iron cuffs"
that are in the props library. This is a symmetrical posing figure.
- Gyro-Poser 11: This is the gyro figure that should be used in Poser 11. Because of some scaling and morphing, the gyro loads a little out of position in Poser 11, so this fixed figure is provided. Poser versions 8 up to version 11 load without a problem. There is also a set of Poser 11 poses in the V4 and M4 pose libraries for the gyro when using poser 11.
- Post: This is a set of right and left hand posts with posable cuff mounts. The post bases can be slid side to side and the posts can rotate side to side. The cuff mounts move up and down and the posts and cuff rings on the mounts have length morphs. There is a non-rendering diamond shaped null base situated in between the posts, this is the base that moves the entire figure around. Pose files are provided for V4/M4 (genesis 3 figures in DS version) and matching poses for the post. Poses utilize standard "basic iron cuffs" that are in the props library. This is a symmetrical posing figure.
- Rack: This is a very cool new vertical rack figure with adjustable height post, posable arm and leg restraint bars with cuff ring rod. There is also an articulated dildo armature with dildo and mini-vibrator with easy pose hose. The dildo has size/shape morphs as does the mini-vibrator. You can position the mini-vibrator then pose the easy pose hose back to its receptacle on the dildo shaft holder. The arms for the dildo and arm/leg arms have length morphs. Pose files are provided for V4/M4 (genesis 3 figures in DS version) and matching poses for the rack. Poses utilize standard "basic iron cuffs" that are in the props library.
- Probe: This is a large, menacing looking death ray style probe with three different tool tips such as antenna, laser beam and light beam. The probe has an easy pose hose that can be poses back into a repositionable hose receptacle. Each tool tip can be hidden, combined with each other or repositioned on the probe. The probe and tool tips also have an "overall scale" morph to make them smaller, this will not change the easy pose hose diameter or hose receptacle. There is a non-rendering diamond shaped null base situated just below the probe, this is the base that moves the entire figure around allowing the probe and hose receptacle to be posed independent of each other. There are a couple of positioning poses to attach the probe/hose to the ceiling of the silo figure if you have the Facility 3 "core package".
-----------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:
Note: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
Poses for the gyro, post, rack and matching poses for V4 and M4 (Genesis 3 male and female in the DS version) are provided in separate libraries.
-----------------------------------------------------------------------------------------------------------------------------------
Cuffs Libraries:
V4-M4: These are for V4-M4
These libraries contain smart prop cuffs to use in conjunction with the most of Davo's packages. These smart props will automatically position and parent to your characters. To apply the cuffs, click on your character in your preview window, then click to add the cuff(s), they will position automatically. Link props can be used to provide a link for using the cuffs like hand cuffs with a link the middle.
Product Requirements and Compatibility:
Poser 8+
Daz Studio Not Supported
Michael 4
Victoria 4
Selfish
By: IronRooRoo
Selfish takes place in medieval times, in a haunted abandoned woodland known simply as the Forgotten Woods. These cursed woods are rumored to be a haven for witches and other social outcasts.
One such individual, a young witch named Eve, is visiting a forgotten chapel which contains a strong concentration of magic energy. She channels this energy to conjure her most ambitious spell yet - to create two dickgirl versions of herself.
She never had interesting lovers. She had always been Selfish.
~ ~ ~
Number of Images: 60
Image size: 1920 x 1080 pixels
Image quality: Standard
Format: PDF
Product Requirements and Compatibility:
Any one of the following: Adobe Acrobat Reader, Microsoft Edge, Internet Explorer
Bird Cage For G3M
By: Vunter Slaush
BirdCage for G3M.
1.Select "Genesis 3 Male Genitalia" , then click BirdCage1.
The cage will apply with 2 morphs of "Genesis 3 Male Genitalia".
The 2 morphs can be found under Parameters - Actor - Shapes.
Use VSCB1_BALLS1 to adjust the size of the balls.
2."visibility"folder: In default setting the 3 chains and extra lock was hidden, can use "visibility" to make them visible.
Apply 0_Default again to make them invisible.
3."Cage&Lock_mat" folder: contain 6 different materials.
4."Chain_Shader" folder: contain 3 types of materials for 3 Chains and 1 PA_Ring.
Use "Surface Selection Tool" select the chains / rings then apply the material.
5.Select BirdCage1, under Parameters - Rigging , there are 6 Adjust morphs for adjust chains of cage.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 3 Male
Teasing You G8F
By: SynfulMindz
Give in to the teasing of your Genesis 8 Female.
With these poses, your scenes will be stunning.
You get:
-20 poses for Genesis 8 Female plus their mirrored versions (40 in total)
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 8 Female
G8F Sexy Poses
By: Chaosophia
20 sexy poses for Genesis 8 Females. Turn on your character's sexy side with these alluring poses.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 8 Female
CB Dalilah G3F & G8
By: CynderBlue
Dalilah is a hand sculpted custom character with standard morph additions. All Diffuse, Specular, Normal and Bump Maps are HD quality for a more realistic render finish.
Designed to work with both Genesis 3 Female and Genesis 8 Female, that both come with 2 Iray shaders, 1 for the newest 4.9.4 version along with a 3Delight shader.
Thank you for purchasing this product I hope you have fun creating beautiful renders telling amazing tales of journeys and adventures... Enjoy :P
---------------------------------------
Package contains the following:
- ADD FULL CHARACTER
- REM FULL CHARACTER
- ADD BODY
- REM BODY
- ADD FACE
- REM FACE
- ADD NIPPLE
- REM NIPPLE
- ADD NAILS ROUND
- REM NAILS ROUND
- ADD NAILS SQUARE
- REM NAILS SQUARE
Genesis 8 Female
- ADD NAVEL
- REMOVE NAVEL
(IRAY 4.9, IRAY 4.9.4+ AND 3DELIGHT Extra's for easy 3DL rendering)
- FULL DEFAULT EVERYDAY MATS
- 18 MAKEUP OPTIONS Including Default
- 7 LIP SHADES + DEFAULT
- 1 LIPSHADE DARKEN
- 7 NAIL SHADES + DEFAULT + FRENCH
- LIP GLOSS SHADER
- 7 EYE SHADES
- 2 EYE LASH OPTIONS
- 2 EYE LASH LENGTHS
- 2 LIE BLUSH OPTIONS
- 2 LIE EYE MAKEUP OPTIONS
- 2 EYE REFLECTIONS FOR 3DL COMPATABILITY
- 1 IRAY SPOTLIGHT
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 3 Female
Genesis 8 Female
T-Girls Fantasies
By: Insane3D
save 44%
4 in 1 futanari bundle by Insane 3D, fantasy and sci-fi themes, 109 pages of hot chicks with big dicks!
Tribal Rituals
Every unwed girl of the tribe was to go through the initiation. The tribesmen would take her deep into the jungle and leave her tied to a post. Around midday, the creature would come. A reptile and a human, a man and a woman, all at the same time, the creature had a pulsing member and heavy breasts, all covered with scales. It would do things to the girl that she would never forget…
Number Of Images: 26
Image Quality: High
Image Size: 1600x1200
Image Format: PDF
Egyptian Punishment
Even the most special of slaves were to be punished for misdemeanor. This exotic blonde t-girl was no exception. Watch as the queen summons her and orders her hard-dicked monster to punish her filthy fuck hole. Things get heated quickly, and soon it’s the queen’s hole that enjoys the presence of the slave’s shaft in it. It all ends with a well-deserved bath of monster cum for the slave t-girl.
Number Of Images: 32
Image Quality: High
Image Size: 1600x1200
Image Format: PDF
Dick of a Lizard Shemale
Two atrocious Lizard-Shemales scared a slutty whore and had their way with her wet, dripping pink slit.
Number Of Images: 26
Image Quality: High
Image Size: 1600x1200 and 1200x1600
Image Format: PDF
Spaceship Shagging
Even though she had a dick of her own, he still wanted to hammer her with his jumbo pecker.
Number Of Images: 25
Image Quality: High
Image Size: 1600x1200 and 1200x1600
Image Format: PDF
Product Requirements and Compatibility:
WinZIP or other unzipping utility
Adobe Acrobat Reader or other PDF reader