10/16/2017 12:55:33 AM by
FunFungi
(Edited: 10/17/2017 12:32:33 AM)
Views: 2889
Imperial Probes "Expansion Pack 1" For DazStudio 4.8+
By: Davo, Freeone
Figure Library Features:
- Accessory 1: This is a menacing articulated dildo armature figure. It has two built in dildo heads (one is hidden inside the "con4" part of the figure), an easypose hose and a hose receptacle port to pose the hose into. The dildos have size/shape morphs built in. The "hoseBase" part of the figure will allow you to position the beginning of the hose, it also has an easypose morph to lengthen or shorten the entire hose. There are easypose bending control nodes on every tenth segment of the hose. You can position the "hoseport" part of the figure somewhere on one of the probes and pose the easypose hose back into it to make it appear the figure is part of the probe. There is a diamond shaped non-rendering node that is the base of the entire figure, move this and all parts of the figure will move together.
- Accessory 2: This is an easypose dildo/tool head with built in dildo, easypose hose and receptacle port to pose the hose into. The dildo head has size/shape morphs, it can also be hidden or turned off. You can position the "port" part of the figure somewhere on one of the probes and pose the easypose hose back into it to make it appear the figure is part of the probe. There are 8 smart prop tool heads that can be added to the tool head.
- Accessory 3: This is cool dart gun to stun your favorite characters. It's got adjustable armatures, some size/length morphs and a retractable dart. You can add and parent this figure to another probe of choice and make it a hunting probe. An extra stand alone dart is also provided.
- Accessory 3 Dart: An extra dart to use on your characters. It has some length/fin morphs.
- Accessory 4: This is a restraint style device you can add onto one of the larger probes or fix to a floor. It has 4 easypose tentacle arms with a bending control node every tenth segment. The "Armbase" hose bases have an easypose morph that can lengthen or shorten all the hose segments at once is built in. The Armbases are repositionable as well. There is a thick, long hose that can be posed to match into the floor, wall or another probe to make it seem attached to the probe. There is a "hoseport" (scaled half size) beneath the base that can be repositioned onto another probe or wall/floor, then pose the hose into it. The "hoseBase" part of the hose has a length morph that will lengthen or shorten the entire hose with one dial. The hosebase can be moved around to another position. This is a symmetrical mirroring figure (easypose settings do not mirror). Starter poses are provided for V4, G3F and matching load/poses for the accessory 2.
- Accessory 5: This is a pair of claws that you can use to grasp things or people. There is a non-rendering diamond shaped base node to move the whole figure around, you can parent this nullbase to another figure. The claws are symmetrical mirroring, however easypose bending does not mirror. The "A1base" on the right and left hand has an easypose scale dial that will lengthen or shorten the entire hose at once. There are easypose controls bending nodes every twentieth segment. Probes 1, 2 and 3 have an arm port build in that you can move into view and pose the claw hoses into them.
- Probe 4: This is a medium sized camera probe. It's got some repositionable camera lenses/bases. It's got a couple of repositionable antenna as well. There is a right and left wing with built in cameras. All elements on this figure have some size/shape morphs, the wings can move in and out. You can attach the "Accessory 2" figure and take advantage of the smart prop tools to make this probe more formidable.
- Probe 5: This is a smaller camera drone with adjustable camera head/lenses. It also has posable wing and two repositionable antennas. Most items on this probe have size/shape morphs to play with. You can attach some the accessories such as the accessory 2 figures and accessory 3 dart guns to make it a hunter probe.
- Probe 6: This is a small camera drone with repositionable camera lens and two posable antennas. There are some side wing morphs to play with as well.
-----------------------------------------------------------------------------------------------------------------------------------
8 tool smart props are provided for Accessory 2 figure.
Also included are the same smart props to fit Probes 1, 2 and 3 (both dildo/tool heads for each). You must own those probe packages to be able to use these smart prop tools.
The smart prop tools descriptions:
- Dish: This is a radar/listening dish. It has some size/shape morphs
- Feeder: This is a forced feeding apparatus. It has morphs to adjust the size/shape of the feeder tube as well as the fluid tank. There is a morph to make the piston on the bottom move in and out.
- Hammer: This is piston actuated beating hammer to punch things. It has some size/shape/movement morphs.
- Laser: This is a laser beam/cutting tool. It has some size/shape/beam morphs.
- Saw Blade: This is a buzz saw style cutting tool. There are size/shape morphs
- Spray: This is a chemical sprayer tool. There are some size/shape/fluid morphs.
- Syringe: This is a syringe with a side vial. There are some size/shape/fluid morphs
- Vacuum: This is a vacuum tube tool. It has some size/shape morphs.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 3 Female & Male
Imperial Probes "Probe 2" For DazStudio 4.8+
By: Davo, Freeone
Figure Library Features:
- Probe 2: This is a large probe. It has a posable neck and head. The eye/camera lens can be repositioned as well. There are 4 large wing/antenna armatures that are posable. These can be repositioned as desired. Most elements on this probe have size/shape morphs. This is also a symmetrical mirroring figure. There is a hidden "baycap" inside the probe that can be moved to its zero position
to cover up the belly bay of the probe. A preset is provided to achieve this, it will also hide the dildo heads and easypose hoses. The "Btoolbase" and "Ctoolbase" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once.
The hoses have an easypose bending control node every twentieth segment. The dildo bases have length/shape morphs. You can use the length morph to hide the dildo and attach any of the 8 smart prop tool heads that are provided in the expansion pack.
There are two arm receptacle/ports that can be used to pose the "Accessory 5" claw figure into if you have the expansion pack.
- Probe 7: This is a stand alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial
that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose bending. There are smart prop cuffs for V4, M4, G3F and G3M that can be used in conjunction with this probe. Starter pose files are provided for V4 and G3F with load pose presets including the cuffs and the probe in the poses library.
-----------------------------------------------------------------------------------------------------------------------------------
Cuffs Library:
Smart prop ankle and wrist cuffs are provided for V4, M4, G3F and G3M. These cuffs are styled for use with the Imperial Probe packages. These smart props will automatically position and parent to your characters. To apply the cuffs, click on your character in your scene, then click to add all cuffs, they will position automatically.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 3 Female & Male
Imperial Probes "Probe 3" For DazStudio 4.8+
By: Davo, Freeone
Figure Library Features:
- Probe 3: This is a large probe with a repositionable and morphing lens head. It has symmetrical mirroring wing segments that can be repositioned, 4 antennas that can be repositioned. Most of the elements on this probe have size/shape morphs to adjust it as desired.
There are also two arm port/receptacles inside the probe that be moved into view if you want to use the "accessory 5" claw figure from the expansion pack if you have it. The "Tool1" and "Tool2" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once. The hoses have an easypose bending control node every twentieth segment. The dildo/ toolbases have length/shape morphs.
You can use the length morph to hide the dildo and attach any of the 8 smart prop tool heads that are provided in the expansion pack.
- Probe 7: This is a stand alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose bending. There are smart prop cuffs in the props library for V4, M4, G3F and G3M that can be used in conjunction with this probe. Starter pose files are provided for V4 (and G3F in the DazStudio version) in the pose library.
-----------------------------------------------------------------------------------------------------------------------------------
Cuffs Library:
Smart prop ankle and wrist cuffs are provided for V4, M4, G3F and G3M. These cuffs are styled for use with the Imperial Probe packages.
These smart props will automatically position and parent to your characters. To apply the cuffs, click on your character in your scene,
then click to add all cuffs, they will position automatically.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 3 Female & Male
Imperial Probes "Probe 1" For DazStudio 4.8+
By: Davo, Freeone
Figure Library Features:
- Probe 1: This is a large probe with two easypose tool hoses and a camera/seeing eye. There are several lights/lens that can be repositioned.
The dildo ports/receptacles can be repositioned and the connector segments under the probe can be posed/repositioned. There are also three antennas that can be repositioned. Most of the elements of this figure have morphs built in for size/shape.
The dildo and camera/eye hoses have easypose bending technology built in. The "Acam" "Bdildo" and "Cdildo" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once. The hoses have an easypose bending control node every twentieth segment. There are two arm receptacle/ports that can be used to pose the "Accessory 5" claw figure into if you have the expansion pack. This figure is symmetrical mirroring for the right and left hand side parts.
A pose file is included in the Apply Cap preset that will hide all the lower parts of this figure including the tool/camera hoses. The Apply Cap preset adds the "under cap" figure to the probe to make it more compact. The tool heads have length/shape morphs. You can use the length morph to hide the tool and attach any of the 8 smart prop tool heads that are provided in the expansion pack.
- Probe 1 "under cap": This is a covering that fits under the probe. It has a posable trap door that opens and closes.
A pose file is included to position the cap and pose file to hide the underbelly parts of the probe.
- Probe 7: This is a stand alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose bending. There are
smart prop cuffs in the props library for V4, M4, G3F and G3M that can be used in conjunction with this probe.
Starter pose files are provided for V4 and G3F with load pose presets including the cuffs and the probe in the poses library.
-----------------------------------------------------------------------------------------------------------------------------------
Cuffs Library:
Smart prop ankle and wrist cuffs are provided for V4, M4, G3F and G3M. These cuffs are styled for use with the Imperial Probe packages. These smart props will automatically position and parent to your characters.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Genesis 3 Female & Male
Imperial Probes "Expansion Pack 1" For P8+
By: Davo
Accessories Figure Library Descriptions:
- Accessory 1: This is a menacing articulated tool armature figure. It has two built in tool heads (one is hidden inside the "con4" part of the figure), an easypose hose and a hose receptacle port to pose the hose into. The dildos have size/shape morphs built in. The "hoseBase" part of the figure will allow you to position the beginning of the hose, it also has an easypose morph to lengthen or shorten the entire hose. There are easypose bending control nodes on every tenth segment of the hose. You can position the
"hoseport" part of the figure somewhere on one of the probes and pose the easypose hose back into it to make it appear the figure is part of the probe. There is a diamond shaped non-rendering node that is the base of the entire figure, move this and all parts of the figure will move together.
- Accessory 2: This is an easypose tool head with built in dildo, easypose hose and receptacle port to pose the hose into. The dildo head has size/shape morphs, it can also be hidden or turned off. You can position the "port" part of the figure somewhere on one of the probes and pose the easypose hose back into it to make it appear the figure is part of the probe. There is a diamond shaped non-rendering
node that is the base of the entire figure, move this and all parts of the figure will move together. There are 8 smart prop tool heads that can be added to the tool head, they are located in the props library. You must hide or turn off the tool head prior to attaching these smart props.
- Accessory 3: This is cool dart gun to stun your favorite characters. It's got adjustable armatures, some size/length morphs and a retractable dart. You can add and parent this figure to another probe of choice and make it a hunting probe. An extra stand alone dart is also provided.
- Accessory 3 Dart: An extra dart to use on your characters. It has some length/fin morphs.
- Accessory 4: This is a restraint style device you can add onto one of the larger probes or fix to a floor. It has 4 easypose tentacle arms with a bending control node every tenth segment. The "Armbase" hose bases have an easypose morph that can lengthen or shorten all the hose segments at once is built in. The Armbases are repositionable as well. There is a thick, long hose that can be posed to match into the floor, wall or another probe to make it seem attached to the probe. There is a "hoseport" (scaled half size) beneath the base that can be repositioned onto another probe or wall/floor, then pose the hose into it. The "hoseBase" part of the hose has a length morph that will lengthen or shorten the entire hose with one dial. The hosebase can be moved around to another position. This is a symmetrical mirroring figure (easypose settings do not mirror). Starter poses are provided for V4 (G3F in the DS version) and matching poses for the accessory in the pose library. You must parent V4 to the "Base" before applying poses.
- Accessory 5: This is a pair of claws that you can use to grasp things or people. There is a non-rendering diamond shaped base node to move the whole figure around, you can parent this nullbase to another figure. The claws are symmetrical mirroring, however easypose bending does not mirror. The "A1base" on the right and left hand has an easypose scale dial that will lengthen or shorten the entire hose at once. There are easypose controls bending nodes every twentieth segment. Probes 1, 2 and 3 have an arm port build in that you can move into view and pose the claw hoses into them.
Probes Figure Libraries:
-Probe 4: This is a medium sized camera probe. It's got some repositionable camera lenses/bases. It's got a couple of repositionable antenna as well. There is a right and left wing with built in cameras. All elements on this figure have some size/shape morphs, the wings can move in and out. You can attach the "Accessory 2" figure and take advantage of the smart prop tools to make this probe more formidable.
-Probe 5: This is a smaller camera drone with adjustable camera head/lenses. It also has posable wing and two repositionable antennas. Most items on this probe have size/shape morphs to play with. You can attach some the accessories such as the accessory 2 figures and accessory 3 dart gun to make it a hunter probe.
-Probe 6: This is a small camera drone with repositionable camera lens and two posable antennas. There are some side wing morphs to play with as well.
Product Requirements and Compatibility:
Poser 8+
Daz Studio Not Supported
Michael 4
Victoria 4
Imperial Probes "Probe 3" For P8+
By: Davo
Probes Figure Libraries:
- Probe 3: This is a large probe with a repositionable and morphing lens head. It has symmetrical mirroring wing segments that can be repositioned, 4 antennas that can be repositioned. Most of the elements on this probe have size/shape morphs to adjust it as desired. There are also two arm port/
receptacles inside the probe that be moved into view if you want to use the "accessory 5" claw figure from the expansion pack if you have it.
The "Tool1" and "Tool2" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once. The hoses have an easypose bending control node every twentieth segment. The tool bases have length/shape morphs. You can use the length morph to hide the dildo and attach any of the 8 smart prop tool heads that are provided in the expansion pack.
- Probe 7: This is a stand alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone
as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose
bending. There are smart prop cuffs in the props library for V4, M4 (G3F and G3M in the DazStudio Version) that can be used in conjunction with this probe. Starter pose files are provided for V4 (and G3F in the DazStudio version) in the pose library.
-----------------------------------------------------------------------------------------------------------------------------------
Props Libraries:
Cuffs Library: Smart prop ankle and wrist cuffs are provided for V4, M4 (G3F and G3M in the DazStudio Version) These cuffs are styled for use with the Imperial Probe packages.
These smart props will automatically position and parent to your characters.
To apply the cuffs, click on your character in your preview window, then click to add each cuff, they will position automatically.
Product Requirements and Compatibility:
Poser 8+
Daz Studio Not Supported
Michael 4
Victoria 4
Imperial Probes "Probe 2" For P8+
By: Davo
Probes Figure Libraries:
-Probe 2: This is a large probe. It has a posable neck and head. The eye/camera lens can be repositioned as well. There are 4 large wing/antenna armatures that are posable. These can be repositioned as desired. Most elements on this probe have size/shape morphs. This is also a symmetrical
mirroring figure. There is a hidden "baycap" inside the probe that can be moved to it's zero position to cover up the belly bay of the probe. A pose file is provided to achieve this, it will also hide the dildo heads and easypose hoses.
The "Btoolbase" and "Ctoolbase" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once. The hoses have an easypose bending control node every twentieth segment. The dildo bases have length/shape morphs. You can use the length morph to hide the dildo and attach any of the 8 smart prop tool heads that are provided in the expansion pack.
There are two arm receptical/ports that can be used to pose the "Accessory 5" claw figure into if you have the expansion pack.
-Probe 7: This is a stand alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone
as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose
bending. There are smart prop cuffs in the props library for V4, M4 (G3F and G3M in the DazStudio Version) that can be used in conjunction with this probe. Starter pose files are provided for V4 (and G3F in the DazStudio version) in the pose library.
-----------------------------------------------------------------------------------------------------------------------------------
Props Libraries:
Cuffs Library: Smart prop ankle and wrist cuffs are provided for V4, M4 (G3F and G3M in the DazStudio Version) These cuffs are styled for use with the Imperial Probe packages.
These smart props will automatically position and parent to your characters.
-----------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:
Note: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
Poses for Probe 2: There is a pose file that will hide the lower parts of the probe and place the bay cover into position.
Poses for Probe 7: poses for V4 (G3F in the DS version) and matching poses for the probe. Parent your character to the probe "base" first, then apply the character pose and equipment pose.
Product Requirements and Compatibility:
Poser 8+
Daz Studio Not Supported
Michael 4
Victoria 4
Imperial Probes "Probe 1" For P8
By: Davo
Probes Figure Libraries:
-Probe 1: This is a large probe with two easypose tool hoses and a camera/seeing eye. There are several lights/lens that can be repositioned. The dildo ports/receptacles can be repositioned and the connector segments under the probe can be posed/repositioned. There are also three antennas that can be repositioned. Most of the elements of this figure have morphs built in for size/shape. The dildo and camera/eye hoses have easypose bending technology built in. The "Acam" "Bdildo" and "Cdildo" parts have an easypose length morph built in that can lengthen and shorten the entire hose at once. The hoses have an easypose bending control node every twentieth segment. There are two arm receptacle/ports that can be used to pose the "Accessory 5" claw figure into if you have the expansion pack. This figure is symmetrical mirroring for the right and left hand side parts.
The dildo heads have length/shape morphs. You can use the length morph to hide the tool and attach any of the 8 smart prop tool heads that are provided in the expansion pack (sold separately)
-Probe 1 "under cap": This is a covering that fits under the probe. It has a posable trap door that opens and closes. A pose file is included to position the cap (and pose file to hide the underbelly parts of the probe).
-Probe 7: This is a stand-alone restraint drone. It's got 4 easypose hose armature connectors that can be posed from their tips back into the base ports on the sides of the drone. There are some posable antenna and a repositionable engine part. You can reposition the lower half of the drone as well for creative posing. The easypose hose Armseg_000 and Legseg_000 parts have an easypose dial that will lengthen or shorten the entire easypose hose at once. There are easypose bending control nodes on every tenth segment. This figure is symmetrical mirroring except for the easypose bending. There are smart prop cuffs in the props library for V4, M4 (G3F and G3M in the DazStudio Version) that can be used in conjunction with this probe.
-----------------------------------------------------------------------------------------------------------------------------------
Props Libraries:
-Cuffs Library: Smart prop ankle and wrist cuffs are provided for V4, M4 (G3F and G3M in the DazStudio Version) These cuffs are styled for use with the Imperial Probe packages.
These smart props will automatically position and parent to your characters. To apply the cuffs, click on your character in your preview window, then click to add each cuff, they will position automatically.
-----------------------------------------------------------------------------------------------------------------------------------
Pose Libraries:
Note: Poses will get your default character "close" to positioning, you may have to make some minor adjustments if your character is heavily morphed or scaled.
Poses for Probe 1: These poses are to hide the elements underneath the probe and to position the under cap.
Poses for Probe 7: poses for V4 (G3F in the DS version) and matching poses for the probe. Parent your character to the probe "base" first, then apply the character pose and equipment pose.
Product Requirements and Compatibility:
Poser 8+
Daz Studio Not Supported
Michael 4
Victoria 4
Ew, Disgusting! For Michael 8 And Genesis 8 Male
By: farconville
Ew, Disgusting is composed of 30 one click expressions for M8 and G8M. It is also composed of 30 morph sliders that can be manipulated depending on preference for more subtle expressions. Files for DAZ Studio 4.9 and up are included in this set.
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Michael 8
Kayalina
By: SexualDarkness
Kayalina is an interactive comic/game with multiple endings based on your choices. Kayalina is a strong and beautiful Amazon who has recently heard about the Demon Queen`s hidden treasure from the townsfolk. She decided to get her hands on the treasure and sit on the journey. The game is only optimized for 1080p, using other resolutions may cause a problem with text popup/scaling.
Contents:
Game folder
Puzzle solutions folder(if you fail to solve the puzzles or get stuck in the game, you can check this folder for help!)
Readme file
Product Requirements and Compatibility:
Winzip
Windows 64 bit
DirectX 11 or above
Microsoft visual C++ 2015 Redistributable
Miko For Aiko 7
By: guhzcoituz
Miko is a character that I created on the basis of a very famous Fighting Game. This character is created by using zbrush and has a very detailed face and body. You can use this character for your fantasy scene, game, and fan art or 3dcosplay. I am very focused on her Kawai Face :D
PS: You need to have Aiko 7 Base First Before applying this Character
Product Requirements and Compatibility:
Daz Studio 4.9+
Poser Not Supported
Aiko 7